Feedback

All Parts by Raybestos

Arthur H. Raymond and Arthur F.Law established Raybestos in 1902. Woven brake lining was invented in 1906, it is one of an important innovation in automotive brakes. Raybestos is world known for its innovative, dependable and safe brake parts. They make a global leader in aftermarket industry with their experience, staying power and a trustworthy brand image. Raybestos is currently distributed by Brake Parts Inc based in Mchenry, Illinois. They are dedicated to ensure that all their parts including friction, rotors, drums, calipers, hub assemblies and hydraulics match the OEM form, fit and function.

Search Raybestos Categories


Videos

videoplay
Partsavatar ca Car Parts Raybestos Brake Training Rotor System
Partsavatar ca Car Parts Raybestos Brake Training Caliper Friction System
Partsavatar ca Car Parts Raybestos Brake Training Brake System Overview
Partsavatar ca Car Parts Introduction to Tie Rods by Raybestos Chassis 76
Partsavatar ca Car Parts Introduction to Ball Joints by Raybestos Chassis 81

Raybestos Bushings

Raybestos Bushings

Raybestos Bushings
Raybestos bushings are made with high temperature synthetics for increased service life and optimum performance. Raybestos "Professional Grade Chassis" thermoplastic bushings are made to withstand high impacts and are extremely resistant to environmental factors. This means they will not crack, become hard, brittle or discolor with age.

PROFESSIONAL GRADE(r) WHEEL CYLINDER

PROFESSIONAL GRADE(r) WHEEL CYLINDER

PROFESSIONAL GRADE(r) WHEEL CYLINDER
BEST MATERIAL CONSTRUCTION, PERFORMANCE AND SAFETY

Professional Grade Wheel Cylinders fit each application as well as the original. Delivers leak-free performance and maximum service life.
• Vehicle Specific Designs
Match OE form, fit and function; superior resistance to heat, corrosion and leakage
• 100% Pressure Tested
Dependable operation and leak-free performance
• Materials Match OE
Vehicle specific designs, cast iron or aluminum depending on the OE
• Smooth Bore Finish
Better-quality seal increases the life of the rubber parts
• EPDM and SBR Rubber Components
Superior resistance to heat, corrosion and leakage
• Hardened Zinc Dichromate Bleeder Screws
Trivalent coating; extra protection and added durability for longer service life

Brake Hose by Raybestos

Brake Hose by Raybestos

Brake Hose by Raybestos
PG PLUS(tm) brake hoses meet Federal Standards to ensure performance and safety, while providing longer hose life, exceptional durability and ease of installation. PG PLUS(tm) brake hoses utilize premium fittings to ensure a good hydraulic seal. PG PLUS(tm) offers you a complete line of top-quality automotive hose products.

Feature: Performs to identical standards required by Original Equipment manufacturers
Benefit: Ensures optimal protection, service life and safety

Feature: Includes all features in original equipment brake hoses
Benefit: Brackets, grommets, molded plastic guards, or wire clips are provided with PG PLUS(tm)

Feature: Premium brass fittings
Benefit: Provides excellent hydraulic seal

Feature: Double crimped fittings
Benefit: Longer hose life and exceptional durability

Strut by Raybestos

Raybestos Struts

Raybestos Struts

Raybestos(tm) brand Professional Grade(r) Strut Assemblies
Raybestos(tm) brand Professional Grade(r) Strut Assemblies are comprised of premium parts that restore the ride control and braking effectiveness of your customer's vehicle. This complete assembly offers several advantages when compared to purchasing individual parts.
* COMPLETE Assembly includes the strut, coil spring, bearing and strut mount
* FAST Complete and ready to install... 5 bolts off and 5 bolts on • EASY No need to look up parts individually
* SAFE Fully assembled struts are safer than assembling the components individually and no spring compressor is required
* ACCURATE Provide a more accurate repair... eliminating the need for the technician to be concerned with "clocking or indexing"
* PRODUCTIVE Using an assembled strut, spring and mount reduces bay time for installation by up to 30%



  • COMPLETE Assembly includes the strut, coil spring, bearing and strut mount
  • FAST Complete and ready to install... 5 bolts off and 5 bolts on • EASY No need to look up parts individually
  • SAFE Fully assembled struts are safer than assembling the components individually and no spring compressor is required
  • ACCURATE Provide a more accurate repair... eliminating the need for the technician to be concerned with "clocking or indexing"
  • PRODUCTIVE Using an assembled strut, spring and mount reduces bay time for installation by up to 30%


Rotors by Raybestos

Advanced Technology(r)Rotors

Advanced Technology(r)Rotors
Advanced Technology(r)Rotors
YOUR BEST POSSIBLE NOISE SOLUTION
Raybestos Adavanced Technology rotors offer the best solution for noise-prone applications. Vehicle specific cooling vane configurations and application specific iron and combine to dampen noise and improve responsiveness for braking that's super smooth and ultra-quiet.
• Vehicle Specific Designs Match OE form, fit and function; ultimate strength
• Black Fusion Coating Improves appearance for a clean, finished look
• Mill Balanced 100% validation ensures proper balance; minimizes vibration
• Vehicle Specific Vane Configurations Match OE; optimal cooling, reduced fade, less noise and increased pad life
• Application Specific Iron Suppresses noise; keeps brakes running cool, quiet and vibration free
• Rotors meet SAE Standard for tensile strength OE-matched; G3000 qualified material for structural integrity and maximum service life
• Turned Finish Installation ready; minimizes noise and improves responsiveness
• Tightest Lateral Runout 0.002″ or less for less pedal pulsation and brake noise; extended pad life
• Minimal Thickness Variation Thickness variation less than 0.0004″; less pedal pulsation and brake noise

PROFESSIONAL GRADE(r) ROTORS

PROFESSIONAL GRADE(r) ROTORS

R300(tm) PERFORMANCE ROTORS

R300(tm) PERFORMANCE ROTORS

Parking Brake Hardware Kit by Raybestos

Parking Brake Hardware Kit by Raybestos

Parking Brake Hardware Kit by Raybestos
PG PLUS(tm) brake hardware is manufactured to precise specifications in form, fit and function. PG Plus uses materials, which perform to Original Equipment specifications or better. Complete the restoration of your braking system with PG PLUS(tm) hardware, the most often overlook components when it comes to a safe, reliable, smooth operating, and quiet brake job.
Disc Brake Hardware Axle Kits
* All Disc Brake Hardware Kits will be Available as "Axle" sets
* Simplified One Line Coverage Innovative
* Rubber Coated Abutment Clips
* Introduction of "Abutment Clip only" kit

Ball Joints by Raybestos

Ball Joints by Raybestos

Ball Joints by Raybestos
When it comes to ball joints, there are noticeable differences between brands. Raybestos "Profession Grade Chassis" ball joints are designed with a one-piece forged housing. What makes Raybestos Ball Joints the superior choice? They are built with a cold formed heat-treated stud for superior strenth and durability. The patented two-piece cylindrical wedge bearing is engineered for the best fatigue/wear resistance in the industry. One-piece forged for strength Two-piece cylindrical wedge provides Industry's finest fatigue/wear resistance No spring, no endplay Cold formed, heat-treated stud for superior strength ad durability Full Ball design delivers ample wear surface Fused urethane boot prevents joint disintegration One premium pieces, no galvanic corrosion thanks to coated stud and hardware

Brake Pads by Raybestos ADVANCED TECHNOLOGY(r) DISC BRAKE PADS

PROFESSIONAL GRADE(r) OE-MATCHED DISC BRAKE PADS

PROFESSIONAL GRADE(r) OE-MATCHED DISC BRAKE PADS
EXPERIENCE THE ULTIMATE BRAKE PAD UPGRADE

Raybestos Advanced Technology disc brake pads utilize top quality formulations to defeat noise, dust and brake fade while delivering increased stopping power. Enjoy confident pedal feel from the very first stop.

• Application Specific Ceramic and Semi-metallic Formulations Less noise, dust and fade; increased stopping power
• Confident Pedal Feel From the First Stop Cured so they are primed and ready right out of the box
• Nitrile-Polymer Coated Hardware Reserved for Advanced Technology; less noise and increased service life
• Integral Electronic Wear Sensor Perfect match to OE design; included where applicable
• Stamped or Shaved Backing Plate Permits proper movement; reduced noise, wear and pulsation
• Steel Plate Mechanical Attachment Unmatched sheer strength; reduces edge lift and prevents rust jacking
• Shims, Slots and Chamfers Match OE Design Reduce noise, vibration and harshness; facilitate temperature stability
• Orbital Staked and Spring Lock Attached Shims Shims stay in proper position; application specific designs for NVH control

PROFESSIONAL GRADE(r) CERAMIC DISC BRAKE PADS

PROFESSIONAL GRADE(r) CERAMIC DISC BRAKE PADS

SERVICE GRADE(r) DISC BRAKE PADS

SERVICE GRADE(r) DISC BRAKE PADS

Raybestos (r) Brand Police Disc Brake Pads

Raybestos (r)  Brand Police Disc Brake Pads

Caliper Bolt or Pin by Raybestos

Caliper Bolt or Pin by Raybestos

Caliper Bolt or Pin by Raybestos
PG PLUS(tm) brake hardware is manufactured to precise specifications in form, fit and function. PG Plus uses materials, which perform to Original Equipment specifications or better. Complete the restoration of your braking system with PG PLUS(tm) hardware, the most often overlook components when it comes to a safe, reliable, smooth operating, and quiet brake job.

Disc Brake Hardware Axle Kits
* All Disc Brake Hardware Kits will be Available as "Axle" sets
* Simplified One Line Coverage Innovative
* Rubber Coated Abutment Clips
* Introduction of "Abutment Clip only" kit

PROFESSIONAL GRADE(r) DRUMS by Raybestos

PROFESSIONAL GRADE(r) DRUMS by Raybestos

PROFESSIONAL GRADE(r) DRUMS by Raybestos
BEING FIRST TO MARKET CREATES A COMPETITIVE ADVANTAGE
Raybestos Professional Grade drums offer full coverage with exclusive access to the Aftermarket's latest products.
• Meet SAE Standard for Tensile Strength
OE-matched, G3000 qualified material for structural integrity and maximum service life
• Vehicle specific designs
Match OE form, fit and function; best operation and ultimate strength; consistent with ISO/TS16949 quality system standards
• Optimal Harmonic
Drums are 100% inspected for balance; smooth operation and noise reduction
• Industry's Most Complete Line of Premium Drums
The best coverage in the industry for vehicles requiring drums
• Critical Balance
Each drum is 100% validated for balance; better braking performance

Master Cylinder by Raybestos

Professional Grade(r) New Master Cylinder

Professional Grade(r) New Master Cylinder
Best Material Construction, Performance and Safety
Professional Grade NEW Master Cylinders give technicians a NEW part that fits each application as well as the original. Delivers everything you need to get the job done; lessens installation time and ensures fewer comebacks.
• Materials and Design Match OE: Vehicle specific designs (cast iron or aluminum); no stress on the brake booster mounting
• Dependable Operation and Leak-free Performance :100% pressure tested; meet SAE J1153 and J1154 requirements for reliability and performance
• All New Parts: New castings, new pistons, new return springs and new components
• No Assembly Required : Arrives complete and ready to bench bleed and install
• Geometrically Toleranced : Body and plastic reservoir match centre to centre for a proper fit and leak-free operation
•Bore Size and Finish Matches OE: Prevents fluid bypass, which can cause loss of hydraulic pressure; extended service life
• New Piston Assembly and Return Spring : Prevents brake drag, which can overheat the caliper and rotor; increased pad life
• EPDM and SBR Rubber Components :Meet SAE specs and are compatible with brake fluid; resist heat, corrosion and leakage
• Hardened Zinc Dichromate Bleeder Screws : Trivalent coating; extra protection, added durability and longer service life
• Reduced Warranty Claims : Passes SAE tests for proper function and leak-free operation at hot and cold temperatures

Rotors by Raybestos

Rotors by Raybestos

ADVANCED TECHNOLOGY(r) ROTORS
YOUR BEST POSSIBLE NOISE SOLUTION
Raybestos Adavanced Technology rotors offer the best solution for noise-prone applications. Vehicle specific cooling vane configurations and application specific iron and combine to dampen noise and improve responsiveness for braking that's super smooth and ultra-quiet.
• Vehicle Specific Designs Match OE form, fit and function; ultimate strength
• Black Fusion Coating Improves appearance for a clean, finished look
• Mill Balanced 100% validation ensures proper balance; minimizes vibration
• Vehicle Specific Vane Configurations Match OE; optimal cooling, reduced fade, less noise and increased pad life
• Application Specific Iron Suppresses noise; keeps brakes running cool, quiet and vibration free
• Rotors meet SAE Standard for tensile strength OE-matched; G3000 qualified material for structural integrity and maximum service life
• Turned Finish Installation ready; minimizes noise and improves responsiveness
• Tightest Lateral Runout 0.002? or less for less pedal pulsation and brake noise; extended pad life
• Minimal Thickness Variation Thickness variation less than 0.0004?; less pedal pulsation and brake noise

PROFESSIONAL GRADE(r) ROTORS

R300(tm) PERFORMANCE ROTORS

PROFESSIONAL GRADE(r) LOADED CALIPERS

PROFESSIONAL GRADE(r) LOADED CALIPERS

PROFESSIONAL GRADE(r) LOADED CALIPERS
SMOOTH OPERATION AND LEAK FREE PERFORMANCE
Professional Grade Loaded Calipers save you time during the service process. They deliver an installation ready product with OE matched friction for the best possible performance.
• 100% Pressure Tested
Dependable operation and leak-free performance
• Materials Match OE
Vehicle specific designs, cast iron or aluminum depending on the OE specifications
• EPDM Rubber Components
Superior resistance to heat, corrosion and leakage
• Friction Material Matches OE
Pre-lubed and loaded with Raybestos brand formulated friction
• Easy Installation
Fully assembled; new bleeder screws, copper sealing washers, hardware and mounting brackets
• Smooth Operation
Critical areas pre-lubricated with a high temperature synthetic lubricant
• Best Overall Coverage
Satisfy both quality-conscious and budget-minded customers

PROFESSIONAL GRADE(r) FRICTION READY CALIPER

PROFESSIONAL GRADE(r) FRICTION READY CALIPER

CV Boot Kits by Raybestos

CV Boot Kits by Raybestos

CV Boot Kits by Raybestos
Our constant velocity boot line consists of over 480 part numbers, including CV boot kits, clamps, spindle nuts, tools, roll pins, and grease. Complete kits include the CV boot, packet, clamps and installation instructions. Available in original equipment style solid boot, in universal style, or in split boot style. Original equipment and universal style are made from either neoprene or silicone; split boots are available neoprene only.
Feature: Made from Neoprene Benefit: Improved wear, better fit, flexible in extreme cold, resistant to solvents, oil and ozone, and ease of assembly Feature: Silicone available in some applications Benefit: Same as neoprene, plus more heat resistant.

Brake Shoes by Raybestos

PROFESSIONAL GRADE(r)BRAKE SHOES

PROFESSIONAL GRADE(r)BRAKE SHOES
Oe Or Better Quality and Increased Service Life

Raybestos Professional Grade Brake Shoes offer a full coverage program (including parking brake shoes) that delivers industry leading category coverage to trucks, police, taxi and fleet-ype vehicles that require severe duty performance.

• Highest Sheer Strength :Provides highest possible bond integrity
• Contour or Cam Ground :Ensures the best contact between shoe and drum
• Premium New Steel :Facilitates correct shoe to drum contact for best performance
• Application Specific Materials :Best performance and service life; provide stable and balanced braking
• Riveted or Bonded :Delivers the highest possible shear strength; reduces noise and vibration
• OE Matched Levers and Hardware :All required levers and hardware included; easy and complete installation
• Premium Dipped Coating :Provides corrosion resistance for superior durability

SERVICE GRADE(r) BRAKE SHOES

SERVICE GRADE(r) BRAKE SHOES

Tie Rod Ends by Raybestos

Tie Rod Ends by Raybestos

Tie Rod Ends by Raybestos
Tie Rod Ends by Raybestos
Tie rod ends, ball joints and idler arms are the centerpieces of a vehicle's chassis system. A poorly designed or manufactured part can easily lead to costly repairs down the road. "Professional Grade Chassis" parts are Manufactured for optimal vehicle performance. Like all Raybestos components, these tie rod ends are designed with superior features. One-piece forged housing for strength Paired-bearing design yields low-friction, high-impact resistance Precision-machine stud delivers consistent torque for smooth operation Dyno tested for performance