What is Light Covers
Headlight covers are an affordable way to apply beauty and protection to any type of car, including trucks and RVs. These covers range from transparent vinyl film to rigid plastic shields and are easy to use, as they provide a protective barrier over the headlights, which assist in decreasing damage to the glass as it also upgrades the inclusive look of the car. Headlight covers come in so many brands and styles that are available in the marketplace, so car owners must cautiously take in mind their requirements and buy the headlight protectors that match their needs the most. When washing your car by hand the next time, take a detailed look at the front end. That means a very good look. Even if you’ve got a new ride, it only takes weeks before everyday driving takes its effect on your car. The more your car ages, the further you will see some signs: the sand effects and other meticulous rough particles that can get tossed against the front. The paint to get pitted is one case scenario, in which you must consider protecting the headlight glass with a car bra. Another concern even bigger is the damage that is imposed to your headlamps. A rough blast of particles will start to dull and pit the lenses, declining the light output, but also a pebble or small rock tossed from a truck tire tread will crack the headlamp assembly, which will lead to an expensive repair. You may dwell in a winter climate where salt and sand will scatter all over the road. Unfortunately, modern cars that have plastic headlight assemblies ultimately are affected by UV exposure. Therefore, if you live in the warm and toasty South without experiencing winters, the sun will also do a number on your lamp assemblies by turning them dull and cloudy. We fully perceive in the car enthusiasts needs to protect their car from any kind of wear and damage, so we will discuss the different headlights and tail light cover products for both front and rear lenses. PartsAvatar offers clear headlight covers that peel-and-apply, but also pre-shaped covers. Also, we offer fully tinted headlight and tail light cover pieces, as well as covers that give the appearance of projector beams with the use of stylistic surround design.
About Light Covers
PartsAvatar has in stock all high-end light covers you will easily find at our online and onsite auto shops all over Canada:GTS headlight covers, GTS pro-beam headlight covers, AVSprojectorz headlight covers, GTS blackouts tail light covers, AVS black slots tail light covers, wade headlight covers, GTS smoke tailblazers tail light covers, rugged ridge smoke exterior light covers, rampage light covers, GTS smoke headlight covers, GTS fog light covers and GTS reverse light covers. Soft Urethane Film Clear Headlight Covers are peel-and-stick headlight covers that make installation easy, and their construction is so flexible it enables them to coat the headlamp assemblies to a great precision of perfect form fitting. These covers are crystal clear, so they are invisible to see and they enable full-fledged headlight brightness to seep past with no moderation. PartsAvatar has got the WeatherTech LampGard Headlight Covers and Husky Shield Headlight Guards, what’s special about them is that they are created from thin acrylic film design to attach and stick fast permanently when it is installed. They construct a tough and strong shell to keep your headlamps protected by getting blasted with sand that turns them opaque, but also they enable ice to be chipped off aggressively throughout winter months having not getting damage. Built-in UV enzymes help deflect any dryness, hardening and discoloring that could greatly damage the plastic guard pieces, so that the enzymes protect your headlamp assemblies from UV rays, which will bounce right off. PartsAvatar offers soft urethane headlight covers that are designed to stick on fast and permanently with ease when performing the installation procedure. The first task is the clean out the headlights to the greatest completeness, saying this; there are some headlight cover kits that might come with a small bottle of cleaning mix. Afterwards, take a clay bar to remove all hardened dirt, bugs and road tar that is still attached to the headlight assembly lens. When your prepared to add on the headlight covers, squirt on a mix of rubbing alcohol and water onto your hands and the interior stick-on side of the headlight cover. This keeps the cover from attaching on instantly as it touches so that it can slide around until it fits on a position at perfect ease. When the alcohol and water mix dries out, the glue will take over the job and stick on permanently.
Learn more about Light Covers
Each of these kits includes squeegees that can be used by the time the headlight covers have been positioned in place. The squeegees are to slide along the surface so that it pushes away any small air bubbles beneath enabling the cover piece to overlay all flat and even to perfection. Wade’s Headlight Covers are created by a clear, high-impact acrylic that gives ultra strength protection since it is constructed into a thick, hard shell. These pieces are already formed to fit over the headlamps of your car, so that they will be mounted safely with a double-sided tape and look all correct. Once entering make, model and year in the Product Options field of the PartsAvatar website, you can choose between clear and smoke, and this all depends on the car model. If seeking more smoked “tinted” headlight covers, you can find them when clicking on the Products Options section of the pages Headlight Covers and Wade Headlight Covers.These peel-and-stick covers do not attach permanently, instead they are made of hard shell pieces that can be removed and attached more easily according the inspection regulations in the location you live in. The AVS covers are made from acrylic that is adjusted for impact, as they give a higher protection level for protection against rocks and debris for anyone who rides on road and trails that are charred up, not paved. If you want to use accents to underlay projector beam lights into the headlamp assembly, AVS Projectorz Headlight Covers have the stylish design that is very specific to vehicles. These covers hurdle out the unwanted pieces of the headlight lens and sustain openings for the headlight beams to protrude the light. This is an easy solution to provide the car’s front end a boost in appearance. The projectors come in black, also the material can be painted over, so you can match it up with your car or personalize the color. The GTS Pro-Beam Headlight Covers also replicates the look of projector beam lenses. On the PartsAvatar website, you’ll see the Platinum Package that replicates a frosted headlight lens with circular headlight cutouts, the Carbon Fiber package that replicates carbon fiber, the Tribal Package that visualizes war paint and a package that provides flame decals. Tail Light Covers, such as the GTS Smoke TailBlazers are black plastic cover pieces that have diagonal slotted openings for the purpose of illumination. The pattern is stripped, so it catches your attention and adds a special personalized look, which ensures your ride stands on out the highway. At PartsAvatar, GTS offers a set of Pro-Beam Tail Light Covers that provide the exact same design options you will see in their Pro-Beam headlight covers. You may prefer tinted/smoked covers for the rear of your car, also GTS provides blackouts tail light covers and smoke turn signal covers. Whether the covers are for style or protection, you will definitely stand out with a classy set of headlight covers.