Error Code P2739: What It Means & What To Do?
OBD Code P2739 - Pressure Control Solenoid "F" Control Circuit High
This OBD-II error code is related to a problem with the Pressure Control Solenoid of your vehicle and hence is defined as a Pressure Control Solenoid "F" Control Circuit High. Your vehicle's Transmission Control Module makes use of the PC solenoids so that it can control the hydraulic pressure. This hydraulic pressure is what helps in applying various clutch packs so that gear ratios can be applied as per the need of the driver. All this works cohesively to give a smooth drive on the road. If the TCM picks up a problem with the pressure control solenoid it will set the P2739 code and the engine will likely enter limp mode and the check engine light will be turned on as well.We have gathered all the information needed for you to understand this error better at the same time be able to figure out how to resolve the problem, so that you can use your car.
Learn More About OBD Error Code P2739
The PC solenoid valve is primarily an electronic
pressure regulator. This controls the transmission line based on current
flowing through its coil windings. When this current flow and increases a
magnetic field is then produced. This in turn moves the solenoids plunger away
from the exhaust port, which decreases the output fluid pressure. This output
fluid pressure is regulated by the PC solenoid valve, and hence the line
pressure is ultimately lowered. In order to suit the driving condition in
response to the signal received by the TCM module, the line pressure solenoid
valve will regulate the oil pump discharge pressure.
What causes this problem with the Pressure Control Solenoid
"F" Control Circuit High?
- Defects of the
Pressure Control Solenoid
- Dirty or
contaminated transmission fluid
- Transmission
filter is dirty or clogged
- Corrosion or
damages of the connectors
- Defect in the
Transmission Pump
- Defects present
in the Transmission Valve Body
- Restrictions in
the hydraulic passages
- Problems in the
wiring, possible damages also present
- Non-functional
PCM module
Replace/Repair These Parts To Fix OBD Code P2739
- Pressure Control
Solenoid - Controls the fluid pressure to the internal
friction plate clutches or drum bands. If the PC solenoid is not working
properly it can cause slipping, this causes the transmission to overheat. Fix
this problem and get rid of the P2739 code by repairing or replacing the PC
solenoid. PartsAvatar stocks over 3 million car replacement parts, you are
bound to find the PC solenoid for your vehicle online with us.
- Transmission Control
Module - Changes the gears so that the vehicle can
function on road. A TCM fault can very much cause error code P2739 to set. In
order to fix this issue, you will have to either repair or replace the TCM.
Find the perfect fitment TCM for your vehicle today on PartsAvatar. Order
online from the comfort of your home and have it reach your doorstep in just
days!
- Oil Pump - Responsible for circulating the engine oil under pressure to the rotating bearings,
the sliding pistons and the camshaft of the engine. This process helps
lubricate the bearings and thereby allows use of higher-capacity fluid bearings
and also assists in cooling the engine. A fault pump can be the reason why you
have the P2739 code set. Fix this problem via repairs and see if the code
persists, if it does; then you will have to opt for replacement. You can choose
from a wide range of brands and prices to get the one suiting your budget and
quality. PartsAvatar ships to the remotest corners of Canada. Now you can skip
cross border shipping and delays in delivery!
- Pressure Control Solenoid Valve - The
fluid pressure to the internal friction plate clutches or drum bands of your
vehicle is controlled by this valve. A bad or failing transmission pressure
control solenoid can cause multiple issues like slipping, which causes the
transmission to heat up. You will also note the P2739 code to set due to a
faulty PC solenoid valve. Try to fix the problem by repairs or replacement as
needed.
- Transmission Pump - Helps in circulating the
fluid. A faulty pump can harm the whole TCM. Try to fix the problem via repairs
or replace it as needed.
- Powertrain Control
Module - Is the central control unit of your vehicle, it
manages all the other modules so that your car functions smoothly. A
problematic PCM can result in random codes to be set, so try to fix it first.
If that doesn’t help you will have to replace it. Replacing the PCM requires
reprogramming. Ensure you take help from a professional diagnostician for this.
Find what you’re looking for on PartsAvatar and avail free shipping on orders
over CAD $99.
- Transmission Valve Body
- An integral part of the TCM, the Transmission valve body works in a
network system. It directs pressurized transmission fluid to a network of valves which put
together correct clutch packs for smooth gear functioning. You will have to
resolve the issue with the transmission valve body to get rid of the P2739
code. You can find one on PartsAvatar, order online and track your shipment
till it reaches your doorstep.
Symptoms Of OBD Error Code P2739
If you are facing OBD error code P2739, then
there are significant common symptoms that can be felt or observed. We have
worked out a list here to help you out in understanding this problem better.
Common Symptoms
- Misfire-like
symptoms are present
- Check Engine
Light gets activated
- Increase in the
consumption of fuel as compared to before
- PCM puts the
vehicle into limp mode
- A slip of
Transmission when shifting becomes common
- It is hard to
shift transmission
How To Correct P2739 Pressure Control Solenoid "F" Control Circuit High
After understanding the symptoms and few common
causes behind the OBD error code, we are here to help you out in understanding
the ways and means to correct the issue. To solve any issue you need to follow
certain steps, and to solve OBD error code P2739, you will need to undergo the
following replacements:
- Change the fluid and filter
- Replace faulty Pressure Control Solenoid or
repair it if possible
- The faulty transmission pump will have to
undergo repairs or replacement
- Transmission valve body needs to be repaired or
replacement as needed
- Flush the transmission so that the passages can
be cleaned of any blockages
- Cleaning of all the corrosion from connectors
and checking wiring/ circuitry for damages
- PCM needs Flashing or replacing
If you need parts to fix this issue, you no longer need to search for them. We at PartsAvatar Canada have an extensive range of auto parts Pcm, Pressure Control Solenoid, Transmission Control Module, Transmission Valve Body, Transmission Pump, Transmission Filter, Oil Pump in stock from you, ranging from all replacement parts to all interior and exterior parts
Easy Diagnosis Of Engine Error OBD Code P2739
Diagnosing this code is important so that you
can drive your vehicle safely on road. In order for the PCM to get the car out
of limp mode you will have to fix the issues you’re having with it and get rid
of the P2739 code. Following are some steps to do so:
Use the OBD scanner and connect it to the
diagnostic port of your vehicle and retrieve all the codes stored. Make note of
them just in order just in case there’s an intermittent condition. Now take
your vehicle on a test drive and see if the code is reset or if the PCM enters
readiness mode. This will help to know if there’s an intermittent condition.
Depending on the condition of the transmission
you may have to removing the transmission pan by removing it and examining its
condition. This will help resolve any fuel related issues with the
transmission.
It’s important to also check the wiring and
connectors to see what condition they are in. Accordingly repair or replace it
and see if the code returns. After these are fixed clear the codes and go on a
test drive and see if the code reappears.
Common Mistakes When Diagnosing the P2739 Code
- Failed Transmission
Control Module (TCM)
- Low level of the Transmission
fluid
- Failure of the Transmission
shift solenoid
- Problems with the wiring