Guide To P072B OBD Error Code Solutions

<<See All OBD Codes

The error code P072B can be defined as Stuck in Reverse. There are a lot of modules as well as computers monitor and adjust a vast number of components and systems in order to make the vehicle's operation seamless as well as effective. Automatic transmission is one out of those components as well as systems.

Want to learn something more about this fault code? Then you have arrived at the right place. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Stuck in Reverse?

• Stoppage in transmission hydraulics
• Less automatic transmission fluid (ATF) level
• Grubby automatic transmission fluid (ATF)
• Transmission mechanical issues
• Shift solenoid might be defective
• Flawed transmission valve body
• Quirks in the transmission control module
• There can be opened or shorted transmission control module harness
• Transmission control module (TCM) circuit poor electrical connection

1. Automatic Transmission Filter - A faulty Automatic Transmission Filter can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Automatic Transmission Fluid - If everything is alright with PCM, then there is surely some defect in Automatic Transmission Fluid. Get it replaced before the situation gets worse.
3. Auto Transmission Control Module - P072B code can display due to some quirks in the Auto Transmission Control Module. So, it is very important to replace the Auto Transmission Control Module with us at equitable prices.
4. Powertrain Control Module - Do you remember when was the last time you got your car Powertrain Control Module checked up? A dirty Powertrain Control Module can cause a lot of issues like displaying P072B code.
5. Auto Transmission Valve Body Kit - Poor Auto Transmission Valve Body Kit can cause a lot of difficulties, so why not get it replaced at time?
6. Automatic Transmission Sensor - Are there some faults in your Automatic Transmission Sensor? Don’t waste time and get them replaced or else P072B code can turn up.
7. Auto Transmission Shift Solenoid - OBD Code P072B can appear because of faulty Auto Transmission Shift Solenoid. So, all you have to do is to visit us and buy Auto Transmission Shift Solenoid as affordable prices.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P072B? Your wish is our demand. Have a look at them below:

Common Symptoms

• Overall power might be low
• No movement in the vehicle
• There can be some abnormal engine noises
• Less throttle response
• There can be limited vehicle speeds
• Automatic transmission fluid might start leaking
• Uncommon vehicle speeds

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Recondition the mechanical issues in the transmission
• Rebuild the quirky transmission control module
• The defective shift solenoid should be mended
• If there is a stoppage in transmission hydraulics, then it should be replaced or repaired as per the requirements
• Carefully fix the less automatic transmission fluid (ATF) level
• Restore the faulty transmission valve body
• Repair or replace the grubby automatic transmission fluid (ATF)
• If there is an opened or shorted transmission control module harness, then you must repair it
• It is essential to replace or repair the transmission control module circuit

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range TCM, automatic transmission fluid (ATF), Obd2, Obd2 Scanner, Obd2 Bluetooth, Car Diagnostic Tool, Car Scanner, Transmission Jack, Transmission Oil, Manual Transmission Fluid, Scan tool, Honda Transmission Fluid, Oil Dipstick and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P072B code to be stored:

• The integrity of your automatic transmission fluid should be verified. A dipstick can be used to check the level of the A/T with the vehicle running and in park. This method varies a significant amount between manufacturers. A service manual in the dash can be used to find the information with ease or sometimes it is even printed on the dipstick itself! Just make sure that the fluid is clean and free from debris.
• If you do not remember ever doing a transmission service, then you can always inspect your records and service your transmission accordingly. You will be amazed to know how grubby ATF can affect the functionality of your transmission. It is very important to check ATF level on flat surface to obtain accurate readings. The fluid which is recommended by the manufacturer should always be utilized.
• Did you just see some leaks? If your fluid is low, then it means that it is surely going somewhere. After that you should carefully inspect your driveway for any signs of oil stains or puddles. You never know that this might be the issue. Either way, it's a nice idea to address this as well.
• After that it is important to inspect the transmission control module for any damage. If it is located on the transmission itself or any other location where it may be subject to the elements, you should take a look to find if there are any signs of water intrusion.
• This could most definitely cause a problem like this, among possible others. Any signs of corrosion on the housing or connectors will indicate that there is some problem. If everything checks out up to now, based on your OBD2 scanner capabilities, then the gear position should be detected and its functionality should be verified. It can be detected if your transmission is shifting or not by its mere drivability.

Do you have it floored and its speed is increasing moderately? Then there are chances that it might be stuck in a high gear (4,5,6,7). Are you able to accelerate quickly yet the vehicle's speed never goes as swiftly as you'd like? Then it would mean that it is stuck in a low gear (1,2,3).