P0339 - OBD Trouble Code

<<See All OBD Codes

OBD error code P0339 flashing? Wondering what it means? Well, just like other generic obd codes, P0339 relates to all OBD-II equipped vehicles. This error codes indicates intermittent condition in the crankshaft position sensor circuit A. In other words, it means that your vehicle?s PCM or ECM has detected a problem with the crankshaft position sensor A circuit.

Keen to know more about this error code P0339? If your answer is Yes, then you are at the right place. We at PartsAvatar are here to help you out with all your questions related to error code P0339. Powertrain control module uses the signals from the crankshaft and camshaft sensors to calculate and ascertain the ignition and spark timings. When PCM detects that signals from the crankshaft position sensor are intermittent over a long period of time, it will set this error code. A number of causes can be responsible for this error code. To know more about them have a look at the points listed below.

What causes this problem with the Crankshaft Position Sensor A Circuit Intermittent?

• Bad or faulty crankshaft position sensor
• Bad or faulty crankshaft sensor connectors and wirings
• Damaged reluctor ring with missing teeth
• Problems with timing belt
• Problems with powertrain control module itself

1. Crankshaft Position Sensor - It will definitely be a good idea to replace the defective ones with brand new ones, considering that P0339 code indicates issues with your vehicle?s crankshaft position sensor.
2. Crankshaft Parts - Another common cause of the P0339 error code is faulty crankshaft sensor connectors and wirings. You can find the best replacement for them on our website and that too at the most economical prices.
3. PCM - if you need powertrain control module to correct your obd error code P0339 then you can simply browse through our website and get your hands on the best selection of parts available. We have in stock parts for all makes and models running on the Canadian roads.
4. Diagnostic Tools - In order to be that DIY guy, you need to few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so, so why not have a look?
5. Timing Belts - If you are facing OBD error code P0339 then chances are that your timing belt is damaged and demanding for a quick change. So, what are you waiting for? Buy a new one with us now

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0339? Your wish is our demand. Have a look at them below:

Common Symptoms

• Illumination of check engine light
• Steep fall in fuel efficiency
• Decline in overall engine performance
• Engine misfires
• No start conditions
• Engine stalling and rough idling
• Problems with acceleration

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Replace the bad crankshaft position sensor
• Replace the corroded or damaged sensor connectors and wirings
• Make sure there are no loose connection and gaps
• Check for any oil leaks that can potentially damage the wiring
• Replace the bad reluctor rings with missing teeth with a new one

Don?t get tensed if you are still facing any of these issues as we care for our customers and that?s why we offer a good range of Crankshaft Position Sensor, Connectors, Pcm and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0339 code to be stored:

• First and foremost, connect an OBD-II scanner to the communication port of the vehicle to inspect all the stored codes. Clear the codes and conduct a road test, and check if the code returns.
• Next, conduct a physical inspection to check the condition of the crankshaft sensor connectors and wiring harnesses. In case of any damage or loose connections undergo replacements
• Lastly, check the crankshaft position sensor properly by removing it from the vehicle.

Common Mistakes When Diagnosing the P0339 Code

To avoid any misdiagnosis, make sure you do not replace the crankshaft position sensor without making sure of it being damaged. Possibility is that the sensor is completely okay and the problem lies with its sensors and connectors.