P0336 OBD Error Code: Problem & Solutions

<<See All OBD Codes

OBD error code P0336 flashing? Wondering what it means? If Yes, then you are at the right place. We at PartsAvatar Canada are here to help you out will all your queries related to OBD code P0336. OBD error code P0336 is a generic trouble code, which means it applies to all OBD-II vehicles, though the steps to fix them might vary depending upon the make.

Keen to know more about this OBD error code P0336? This error code relates to your vehicle crankshaft position sensor A circuit has range/performance issue.

OBD error code P0336 will be set by your vehicle’s Powertrain Control Module (PCM), when it detects a loss of signals from the crankshaft position sensors.

What causes this problem with the Crankshaft Position Sensor A Circuit Range/Performance?

• Worn down teeth or broken and snapped reluctor wheel
• Magnet shavings of the crankshaft position sensor being stuck on the sensor or the reluctor wheel
• Burnt out or shorted crankshaft position sensor wires and circuits
• Crankshaft position sensor wires suffering a short circuit
• Bad, damaged, broken or corroded crankshaft position sensor connector
• Misfiring engine
• Issues with the crankshaft position sensor
• Issues with the camshaft position sensor
• Issues with the engine control module

1. Crankshaft Position Sensor - OBD error code P0336 flashing? It's time to replace those damaged crankshaft position sensors now. Buy new ones with us today.
2. Camshaft Position Sensor - If OBD error code P0336 is set by your vehicle’s PCM, chances are that your engine’s camshaft position sensor is damaged. So, what are you waiting for? Buy new ones with us today.
3. ECM - Engine control module might also need to be replaced to correct this engine error code P0336. So, if you need one for your vehicle, you can easily find them with us.
4. Powertrain Control Module - Defective or damaged PCM can become a potential cause for many issues. So why not check and replace the damaged ones
5. Crankshaft Parts - Looking for crankshaft parts such as connectors, wirings and more for your vehicle make? If yes, then you can easily find that with us.
6. Diagnostic Tools - You can choose from a wide selection of diagnostic tools on our website and make it easy on yourself when diagnosing problems and creating accurate solutions for your car.

There could be countless symptoms which that will accompany this fault code P0336. Willing to know some common symptoms of OBD Trouble Code P0336? Your wish is our demand. Have a look at them below:

Common Symptoms

• Flashing check engine light
• Engine misfires, in one or two of the cylinders
• Hesitation upon the acceleration
• No start conditions
• Vibrating engines
• Engine misfires or backfires, accompanies with stalling conditions
• Sudden loss in fuel economy

Looking out for some ways to correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below to correct this OBD error code P0336:

• Firstly, we would recommend you to undergo a reluctor wheel replacement.
• Secondly, considering the fact that problem lies in the crankshaft position sensor and it circuits/connectors. Replacing the bad ones is definitely on the list.
• After that you might need to repair or fix any engine misfires if found.
• Next, you will need to undergo a camshaft position sensor replacement if found damaged.
• Lastly, you will have to either reprogrammed the engine control module/powertrain control module or replace it with a new one to get rid of this error code P0336.

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Crankshaft Position Sensor, Camshaft Position Sensor, Ecm and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which you must follow for diagnosing the problem that triggered a P0336 code:

• First of all, you will need and OBD-II scanner to scan all the trouble codes stored in the engine control module.
• Secondly, in order to diagnose this OBD error code P0366 you will need to conduct a visual inspection for any damage to the crankshaft position sensor and its related parts.
• Next, inspect the wires and connectors carefully for any breakage, corrosion or shorts. Also make sure that the wires and connectors are not lying too loose.
• Also, make sure you undergo a complete diagnosis of the reluctor wheel. Take care of the gap that exists between the reluctor wheel and the crankshaft position sensor.
• After all the visual inspection, clear all the codes and perform a road test to check if the code returns.
• If the code returns, use the scanner to check the rpm readings. Make sure you start the car while doing so.
• Now, use a volt-ohm meter in order to inspect the resistance in the crankshaft sensor, camshaft sensor and their wirings.
• In case of engine misfires, conduct a proper diagnosis and repairs.

Common Mistakes When Diagnosing the P0336 Code

• In order to avoid any misdiagnosis, make sure you do not replace the crankshaft position sensor without making sure of it being damaged.
• Considering the fact both crankshaft position sensor and camshaft position work quite close to each other, there are chances you undergo crankshaft sensor replacement when the problem lies in the camshaft position sensor. So, before undergoing any replacement do conduct a proper diagnosis.