Learn All About Exhaust Pipe

The exhaust pipe takes the gas out of the vehicle?s engine. As you start your vehicle, a little gasoline will turn into a mixture of gases and soot that will come out of the exhaust pipe. If the engine has worked hard, then there must be no smoke from the exhaust pipe.

Carbon monoxide is one of the most poisonous gases, and it is blown out of the exhaust pipe of a car.

Willing to know more about car exhaust pipes? If yes, then have a look at our What Are Exhaust Pipes? section.

Features of the exhaust pipe are:

• Exhaust pipe boosts engine performance
• Exhaust pipes are made from premium materials
• It has quality design and workmanship
• It has been designed to withstand for a longer time.

Exhaust pipes are designed to improve the performance of your vehicle. Even in extreme operating conditions, it provides unmatched durability and strength and is designed with the utmost care and attention to detail. These top-notch auto parts are made from first-rate materials to make sure that it lasts long.

The Ultimate Exhaust Pipe Buying Guide for you

So, do you know how the exhaust pipe works? Have a look at the section below to have a look:

• The exhaust pipe functions similarly to other pipes, as it helps to channel exhaust gas from one place to the other.
• It starts at the exhaust manifold flange, goes down towards a specialty pipe known as a 'flex pipe'.
• A new portion of the exhaust pipe extends from the flex pipe to the catalytic converter.
• This portion of the pipe will contain an oxygen sensor, which allows the computer to analyze the exhaust before it cleans the catalytic converter.
• After the catalytic converter, another portion of the exhaust pipe will move the cleaned exhaust towards the muffler, and an oxygen sensor that is available on that pipe will permit the computer to examine the gases after cleaning.
• Finally the exhaust gases reach the muffler where the noise generated by the engine is reduced.
• A tailpipe is fixed to the muffler which channels the gas downwards so that the heat is kept away from the rear of the vehicle.

Are you thinking of repairing your Exhaust Pipe on your own? Then there is one thing which you must have, that is the right tools needed for repairing your Exhaust Pipe It is essential to make sure that you are outfitted with the right tools to get the work done properly. Have a look at some tools which you might need to get started with your repair work: 

• Aftermarket Exhaust Pipe Kit
• Jack
• Jack Stands
• Measuring Tape
• Safety Goggles
• Work Gloves

If you know which car parts brand suits the best for your Exhaust Pipe then it would save a lot of your decision-making time. What we believe is that picking a particular brand would always be helpful in reducing the clutter, and would make it easier for the customers to find what they are actually looking for. That?s why we have listed out some top brands for Exhaust Pipe below:

• Walker Usa Exhaust Pipe
• Design Engineering Exhaust Pipe
• Magna flow Exhaust Pipe
• BBK Performance Parts Exhaust Pipe
• Bosal Exhaust Pipe

Do you want to gain more knowledge about Top Brands of Car Exhaust Pipe? Have a look at our Which Popular Brand Exhaust Pipe Should I Choose? section.

Do you want to know what the related parts of the car Exhaust Pipe are? We are here to help you out. Have a look at Exhaust Pipe related parts below:

Exhaust Manifold

• An exhaust manifold is a heat-resistant tube which helps to connect an engine along with an exhaust pipe.
• It collects the exhaust gases from multiple cylinders and directs them to the exhaust pipe.
• The exhaust manifold is the first pipe which comes in contact with the exhaust gases after combustion.
• The exhaust manifold connects every port of the cylinder's exhaust to the exhaust system.

Exhaust Valve

• An exhaust valve releases the burnt gases from a cylinder.
• During the initial part of the induction stroke, the exhaust valve closes.
• The inlet valve will open a bit before the top dead center and the exhaust valve will stay open a little after top dead center.
• When pressure increases during compression and combustion, a small amount of air-fuel mixture is sent around the edges of the exhaust valve and between the valve and seat.

Aftermarket exhaust pipes are usually fixed on cars or motorcycles to develop visual appeal or performance. It is always easier to find aftermarket exhaust pipes. Stainless steel exhaust pipes will beautify your car or motorcycle. But if you want to remove your old exhaust and fix the new ones yourself, you?ll find it?s better if you keep away from the stainless-steel exhaust pipes. There should not be any problem if you are sure that the catalytic converter has not become rusted along with your old vehicle?s exhaust system. Fixing aftermarket exhaust pipes on your car can be done quickly in your own ventilated garage or driveway. Also, you can do it with minimum experience and tools.

Step 1: Find a Kit

First, find a kit that will fit along with compression fittings. You can fix it easily as there will be no need for welding. If a manufacturer suggests that you weld the exhaust, then you will need a professional to do that. Ensure that the size is not too big. Else you will damage the pipe if the surface is uneven or if you run over.

Step 2: Jack up the Car

Now you will have to jack up the car. This will give you enough space needed underneath the car to change the exhaust. Make sure that the entire car is supported with jack stands.

Step 3: Measure

Make sure that there is sufficient space between the floor and the rear axle of the car because you will have to wiggle the exhaust so that you can loosen from where it bends up over the rear axle.

Step 4: Remove the Old Exhaust

The old exhaust must be removed off of the car. To do this, take away the tailpipe, then pull it out from underneath the car. If the bolts are rusty that have seized together, heat the car up. You should loosen the bolts enough to break them loose without stripping the head.

Step 5: Fit the New Exhaust

Now fix the new exhaust pipe on by using the old one as a guide. With the help of compression fittings of the new exhaust, you must hold up the exhaust tubes while you do this. Make sure not to tighten the fittings too much. You will have to adjust the position once you mount the exhaust.

Step 6: Finish It Up

The bolts must lead off of the catalytic converter, and rubber mount near the muffler. With the help of these bolts fit the exhaust into place. Once it is in the proper place, you will have to tighten up all your fittings and bolts. Start your car, and enjoy your new aftermarket exhaust pipes!

If you are still confused about which type of car Exhaust Pipe you should buy, then you can visit our The Ultimate Exhaust Pipe Buying Guide. You should always look for the warning signs of a bad Exhaust Pipe and replace them at the earliest you can. With us, you can find Exhaust Pipe at the most economical cost.