Error Code P0C5E: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0C5E can be explicated as Drive Motor "A" Position Sensor Circuit "B" Intermittent/Erratic. The thermistor resistance which is built into the motor temperature sensor would change as per the changes in the temperature of the MG2. Now if the temperature of the MG2 would be low, then the higher would be the resistance of the thermistor. Similarly, the increase in temperature would mean decrease in the resistance.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P0C5E trouble code. The error code P0C5E would start triggering when the PCM would detect some fault in drive motor "A" position sensor circuit "B". One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

What causes this problem with the Drive Motor "A" Position Sensor Circuit "B" Intermittent/Erratic?

• There can be some liquids spilled on the up-shift/down-shift switch
• Some issues related to the wiring as well as connectors

1. Generator Assembly - Are you aware of some warning signs of bad generator assembly? If no, then you have arrived at the right place. Its symptoms are dim lights, warning light, weak or sometimes dead battery, weird smell and odd sounds.
2. HVAC Blower Motor Control Module - A failure in the HVAC blower motor control module would lead to the major issues in the car heating and air conditioning systems. So why not replace it with a brand new one online?
3. Motor Assembly - Car engine might start running roughly or inconsistently due to faulty motor assembly. OBD Code P0C5E can appear because of faulty motor assembly.
4. Engine Control Module - Dead cells in batteries can cause a failure in the engine control module. Many times a battery is left in the rig long after a cell has died. This would affect the grounding in the car battery.
5. Powertrain Control Module - If there are some faults in the PCM, then it may throw off the timing and fuel settings of the engine, which can negatively affect the performance. A flawed PCM may cause the vehicle to experience a reduction in fuel efficiency, power as well as acceleration.
6. Electronic Control Unit - Do you know that the poor performance or unexplained drops in fuel economy or efficiency are often associated to onboard car computer problems, or defective ECU issues?

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0C5E here:

Common Symptoms

• The service engine soon light can start appearing

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C5E:

• You must fix the defective engine control module
• It is essential to restore the flawed motor control module
• Rehabilitate the defaults in the electrical connectors
• Carefully adjust the faults in the wirings

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced drive motor generator, motor position sensor, motor control module, generator assembly, drive motor output shaft and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• Make sure that the drive motor "A" position sensor circuit are in good condition. Some people think that it is an obvious step, but if your computer does not get a steady feed of electricity from the battery, it can cause multiple issues.
• Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay center that can be found under the hood.
• It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire.
• These are some of the major wiring problems that you will encounter with error code P0C5E. Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0C5E Code

• Non performance of the drive motor generator assembly