Guide To P0C5C OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0C5C can be described as Drive Motor "A" Position Sensor Circuit "B" Low. The hybrid battery is being monitored by the engine control module. This error code would be set by the ECM when the drive motor "A" position sensor circuit "B" would not be as per the parameters set by the manufacturer.

Don’t worry if P0C5C error code is triggering again and again. We offer wide range of auto parts at affordable prices to our dear customers. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another.

What causes this problem with the Drive Motor "A" Position Sensor Circuit "B" Low?

• There can be inoperative drive motor generator
• There can be opened or shorted drive motor generator harness
• Drive motor generator circuit inferior electrical connection

1. Generator Assembly - When it comes to your automobile, the generator assembly is a pivotal piece of machinery. The generator assembly would make sure to recycle the power of the car battery which is being used while driving the car.
2. HVAC Blower Motor Control Module - One of the most common symptom of defective HVAC Blower Motor Control Module is a blower motor which might be stuck on just one setting. This auto part is responsible for controlling the speed of the blower motor fan.
3. Motor Assembly - Strange noises would start coming from your car due to faulty motor assembly. Don’t waste time and get them replaced or else P0C5C code can turn up.
4. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
5. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is the in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
6. Electronic Control Unit - The ECU is a major component of your car's on board computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0C5C code by mentioning some major symptoms below:

Common Symptoms

• Appearance of the service engine soon light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0C5C:

• Recondition the non-functioning drive motor generator harness
• It is necessary to perform proper service of the unsound drive motor generator assembly
• Rehabilitate the defaults in the PCM
• Carefully adjust the faults in the drive motor generator

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of drive motor generator, motor position sensor, motor control module, generator assembly, drive motor output shaft and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the drive motor "A" position sensor circuit and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further helping the cause.
• The P0C5C error is triggered if there is a physical problem with the drive motor "A" position sensor circuit which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P0C5C Code

• Some issues related to the drive motor generator assembly