Error Code P07A6: What It Means & What To Do?

<<See All OBD Codes

The trouble code P07A6 can be explicated as Transmission Friction Element "C" Performance/Stuck Off. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code.

The brighter you are, the more you have to learn! That’s why we are here to provide you more knowledge about the P07A6 trouble code. If there are some issues with the internal friction materials in the automatic transmission, it will then lead to unpredictable driving conditions as far as shift timing, torque output and many other complications. Internal slippage can be caused due to uncommon paired tires, insufficient inflated tires.

What causes this problem with the Transmission Friction Element "C" Performance/Stuck Off?

• Bumpy tire sizes
• Problems related to wiring
• There can be some quirks in the engine control module
• The rotational speed/circumference may be unequal
• Flaws in the transmission control module
• ATF might be low
• The friction element might be worn out
• Stained ATF
• Module or harness might have water damage

1. Engine Control Module - There can be some issues with the Engine Control Module due to which you may see P07A6 code appearing over and over again. Visit us to buy best quality Engine Control Module online.
2. Automatic Transmission Filter - Are you facing some faults in your Automatic Transmission Filter? Don’t worry and get them replaced or else P07A6 code can turn up.
3. Body Control Module Component - Common cause behind this P07A6 error code can be some fault in Body Control Module Component. So, it will be a good decision to replace them now.
4. Powertrain Control Module - Body Control Module Component is perfectly fine but still but having that trouble code P07A6 flashing? In such a situation your Powertrain Control Module might be faulty. Why don’t you think of getting that replaced?
5. Automatic Transmission Fluid - The P07A6 code can also arise due to some issues in Automatic Transmission Fluid. So, it is advised to replace them as soon as possible.
6. Auto Transmission Control Module - P07A6 code does not really end up spoiling your Powertrain Control Module, but it might also accompany few Auto Transmission Control Module issues. We have best Auto Transmission Control Module with us.
7. Electronic Control Unit - Are you facing OBD error Code P07A6? Don’t worry as you can fix this issue with new Electronic Control Unit. We care for our customers, that’s why we have Electronic Control Unit for every make and model.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P07A6 here:

Common Symptoms

• Irregular shift patterns
• The power output might be divergent
• Dissimilar handling
• Discordant shift selection
• Automatic transmission fluid draining
• Less torque
• Transmission slithering
• Unstable shifting

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P07A6:

• Carefully adjust the faults in the automatic transmission filter
• Make sure to mend the faulty engine control module
• It is essential to restore the flawed automatic transmission control module
• Repair or replace the quirky electronic control unit
• You must fix the defective automatic transmission fluid
• Rehabilitate the defaults in the body control module component
• The malfunctioning powertrain control module should be repaired or replaced as per the need

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Module, Friction Elements, Diagnostic Trouble, Transmission Oil, Pcm, Atf Fluid, Ecm Module and a lot more to help you out in fixing your car.

If you want to easily diagnose this trouble code, then you must follow the steps which are mentioned here as below:

• First of all, you must perform a technical service bulletin search for your particular vehicle.
• Advanced diagnostic steps become very vehicle specific and may require the appropriate advanced equipment and knowledge to perform accurately.
• We include basic steps below but refer to a vehicle year/make/model/powertrain specific repair guide for specific steps for your vehicle.
• It is very important to follow the basic maintenance procedures accordingly at this point, as far as the transmission's health goes, start at the fluid.
• Your ATF (Automatic Transmission fluid) should be fully clean, free of debris and also, proper maintenance schedules have to be followed to avoid more defects.
• If you don’t remember the last transmission has been serviced (i.e. filter+fluid+gasket), it’s a good idea to perform this before continuing.
• There might be a bit of debris in your oil that is trapped internally. It may only take a simple service, so make sure you are aware of the last A/T service
• Most likely, when trying to find the connector/harness for this system, you will have to find a junction connector.
• There may be one "master" connector so make sure you are working with the correct one by referring to your manual.
• Just be sure that the connector itself is seated properly to ensure a good electrical connection.
• Where the connector is located on the A/T, it may be subject to vibrations that could cause connections to come loose or physically damage them. Not to mention, the possibility of ATF to saturate connectors and wires causing future or present issues.
• All of us should be fully aware of the overall condition of your vehicle.
• Rough tires, worn out suspension parts, inaccurate wheels, all of these can and will cause issues in this system and possibly others as well, so even things out, and you may get rid of this trouble code.

Common Mistakes When Diagnosing The P07A6 Code

• Decrease in the transmission fluid level
• Non-observance of the transmission valve body solenoid
• Internal transmission might start failing