Feedback

P060A - OBD Trouble Code

OBD Code P060A - Internal Control Module Monitoring Processor Performance

<<See All OBD Codes

Love to hit the road? But unable to do so because of these OBDs? Well, with Parts Avatar it is easy to both crack and diagnose the error code P060A. This is a generic powertrain diagnostic trouble code (DTC) that is particularly applicable to a number of OBD-II vehicles. These vehicles range from Honda, Ford, Mercedes Benz, Nissan, Toyota, etc. When the powertrain control module (PCM) identifies an internal processor error, the code P060A sets in. It is also possible that other controllers may also identify a PCM processor performance error and cause a code of similar type to set in. Also, it should be noted that the internal control module controlling processors are liable for various controller self-test duties and overall internal control module answer-ability.

Learn More About OBD Error Code P060A

A specific set of controller processors play the role of constantly regulating the internal controller (particularly PCM) temperature, along with a number of input and output signals. Every time the ignition is turned on and the PCM stimulates, numerous internal controller processing self-tests activate. Besides running internal controller self-tests, the controller area network (CAN) also collates signals from each individual module in order to confirm that each controller is functioning correctly. Furthermore, these tests are performed concurrently. If a variation between any of the on-board controllers indicating an internal processor error is detected by the PCM, the code P060A sets in. The malfunction indicator lamp (MIL) may lighten up at times too. Also, numerous failure cycles may be required for MIL illumination, depending upon the observed intensity of the fault.

 

What causes this problem with the Internal Control Module Monitoring Processor Performance?

 

  • A programming error or an effective controller can be a common cause
  • Unsound controller fuse or power supply relay
  • Connectors in the can harness short circuited or open
  • Inadequate control module ground

Replace/Repair These Parts To Fix OBD Code P060A

  1. Power Supply Relay - Having problems with the power supply relay? Don’t you worry, Parts Avatar has it all. A fault in the power supply relay could end up being the root cause behind the Error code P060A.
  2. Internal Control Module - An insufficient control module should be fixed right away in order fight the complications caused by the error code P060A.
  3. Controller Fuse - A distorted or a bad Controller fuse can end up being the chief host inviting the error code P060A. So, replacing one can be one of the wisest decisions to avoid a problematic system.
  4. Powertrain Control Module - Facing the error code P060A? An inferior quality power control module can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P060A. Tune into Parts Avatar for supreme quality power control module at economical prices.
  5. Engine Control Module - Get your error code resolved immediately with a new engine control module. Tune into Parts Avatar for premium quality ECMs available at budget friendly prices.
  6. Electronic Control Unit - A faulty ECU can be problematic and can cause complications. So, change or repair one that is faulty.
  7. Body Control Module Component - A defective body control module component can end up being the chief host inviting the error code P060A. So, replacing one can be one of the wisest decisions to avoid a problematic system.

Symptoms Of OBD Error Code P060A

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P060A here:

 

Common Symptoms

 

  • Many drivability complications
  • Rough or unstable automatic transmission shifting
  • Decreasing fuel efficiency
  • Harsh idle or halt
  • Uncertainty upon acceleration

How To Correct P060A Internal Control Module Monitoring Processor Performance

Here are some ways with the help of which you will be able to correct the OBD Code P060A:

 

  • The performance programming malfunction should be mended or restored
  • A visual investigation should be performed. Any unsound, damaged or blown controller fuse or power supply relay should be fixed
  • Any of the connectors in the can harness should not be open or short circuited. If found they should be repaired or changed instantly
  • Check in case there is inadequate control module ground, if yes then it should be treated instantly

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade power supply relay, body control module, controller fuse, power control module, electronic control module, internal control module and a lot more for our precious customers.

Easy Diagnosis Of Engine Error OBD Code P060A

Here are some steps which you should follow in order to diagnose this fault code:

 

  • Many a times, even to a highly certified, well-equipped and proficient technician accurately diagnosing P060A can prove to be challenging. There is also the problem of reprogramming.
  • It becomes complicated to replace a damaged controller and perform a complete successful repair, without the required reprogramming equipment. In the presence of ECM/PCM power supply codes, they would need to be corrected before undertaking the task of diagnosing the P060A.
  • There are numerous preliminary tests that can be performed before announcing an individual controller defective. The things that are needed are a diagnostic scanner, a digital volt/ohmmeter (DVOM), and a source of reliable vehicle information. The scanner should be connected to the vehicle diagnostic port and all stored codes and freeze frame data should be restored.
  • It is advised to write this information down, just in case the code confirms to be an intermittent one. After recording all relevant information, the codes should be cleared and the vehicle should be test driven until the code is reset or the PCM enters a readiness mode.
  • When if the PCM enters the readiness mode, it signifies the code as intermittent requiring a tougher procedure to be diagnosed. The condition that causes the P060A to be stored, may even require deterioration before a diagnosis can be made. If the code resets, these short lists of preliminary tests should be continued.
  • While attempting to diagnose a P060A, information becomes one’s greatest tool. Search your vehicle information source for technical service bulletins (TSB) that correspond the code stored, vehicle (year, make, model, and engine), and symptoms shown. If you are successful in finding the right TSB, you may end up yielding diagnostic information that will aid you in a significant way.
  • Your source of vehicle information should be used to extract connector face views, connector pinout charts, component locators, wiring diagrams, and diagnostic flow charts parallel to the code and vehicle in question. It is recommended to use the DVOM to test controller power supply fuses and relays. Test and replace blown fuses as needed. It should be noted that the fuses should be tested with the circuit loaded.

Other Diagnostic Codes Related To OBD Code P060A

P060B - Internal Control Module A/D Processing Performance

P060C - Internal Control Module Main Processor Performance

P060D - Internal Control Module Accelerator Pedal Position Performance

P060E - Internal Control Module Throttle Position Performance

P060F - Internal Control Module Coolant Temperature Performance