Guide To P0507 OBD Error Code Solutions

<<See All OBD Codes

The P0507 code defines how the idle control system has got an extremely high RPM. The ECU has a particular rpm span that enables the idle and when it increases more than anticipated the ECU prepares the P0507 code. As soon as this code is prompted it places the vehicle into a system that is unlikely to fail and on the dashboard the Check Engine Light is illuminated.

The Idle Control System has a motive to control the engine idle speed to encounter the constantly developing cargo put on the engine, for instance using the air conditioning, heater blower motor, wipers, and so on.

What causes this problem with the Idle Air Control System RPM Higher Than Expected?

• Leaking Intake air
• Defective or Plugged IAC valve
• Accumulation of Carbon on the throttle body
• Defective power steering pressure switch
• Failed Alternator 

1. PCV Valve - A blocked PCV valve leads to many other engine issues. Pressure starts to accumulate and gaskets and oil seals might begin to fail. When an engine undergoes several oil leaks, PCV system should always be examined. One other issue is an insufficiency of airflow to lift up vapors coming out of the crankcase. Lacking the airflow, moisture pollution stays put and often results in sludge building up. Controlling the engine while having not enough provision of air is a chief result of engine sludge. It is a smart move to exercise changing the PCV valve throughout every service. Replacing the engine oil and rinsing the engine on a normal basis can protect everything from sludge accumulation within the oil pan that could be the reason the PCV valve to failing.
2. Power Steering Pressure Switch - The diaphragm and switch parts are a cause to undergo continuous stretching and heating. As time passes, this can result in the pressure switch to break down. If this occurs, the power steering commands data will be unable to relay to the engine ECU. For that reason, the steering system utilizes the excess cargo, which is unable to be counteracted for this task. A faltering power steering oil pressure switch can exhibit multiple symptoms: Engine revs are submerging as the power steering is working. Engine slows to a stop during the low-speed steering or parking manoeuvres. Engine management light (EML) is turning on. Power steering is an essential part of your vehicle and is a safety problem, so it should be taken care of by a professional technician right away.
3. Indicator Lamp - Malfunction Indicator lamp (MIL) is a highly important warning system. It?s outlined to come on when particular symptoms lead to the emissions system going corrupt. This may happen because you kept the gas cap loose, or a more critical case, a defected oxygen sensor, catalytic converter, or something else. The Malfunction Indicator lamp should come on when you?re cranking the car, and should come off seconds after exercising a self-test. If it remains on or turns on while you are driving, that means inside the vehicle?s computer is a code that should be checked right away. If the light turns on and stays consistent, this means there is an issue with the emissions system. Regardless, if it turns on and starts blinking, this means that your engine has been dealing with a misfire and you must have it examined by a professional mechanic as early as possible.

It is important to know the symptoms of a problem, as only then you would be able to solve the problem. So here we have listed out some chief symptoms of OBD Code P0507 here:

Common Symptoms

These symptoms may also come with a high or low engine idle RPM, the engine slows down to a stop at low speeds when the accelerator pedal is not being pushed, engine slows to a stop irregularly when letting go of the throttle, a trouble code is stored, and a malfunction indicator lamp is illuminating.

• Detect for Engine Light illumination
• High engine idle
• Shifted idle
• Difficulty starting vehicle
• Roughed up idle

Here are a few ways with will assist you in successfully correcting the OBD Code P0507

• Exchanging or cleaning the idle air valve
• Fixing the intake air leak
• Fixing the charging system
• Washing the throttle body
• Exchanging the power steering pressure switch

Don?t hesitate to call on Parts Avatar Car Parts Online, as we are here to help you! We have upscale IAC Valve, Power Steering Pressure Switch, Indicator Lamp and many more for our sincere customers.

Here are some helpful steps that you need to follow to correctly diagnose this fault code:

Connect a scan tool to the vehicle's DLC port and detect for any codes that are current.

• Make note of the DTC freeze frame data for using on test-drive and clear all of the codes.
• Exercise a test drive on the vehicle to produce copies of the function failure.
• Exercise a visible examination and detect for any ripped vacuum line or exterior air leaks
• Survey the throttle body for too much carbon accumulation and positive opening and closing performance
• Use a scan tool to detect the RPM when the IAC and power steering pressure switch are examined
• Examine the charging system

Common Mistakes When Diagnosing the P0507 Code

Slip-ups are made when basic products are overlooked due to not following the steps in the correct order or not exercising them at all. A few different systems are associated with the P0507 code and if one system has overlooked parts that are working correctly and may need replacing.