Commentaires

P000E OBD Error Code: Problem & Solutions

OBD Code P000E - Fuel Volume Regulator Control Exceeded Learning Limit

<<See All OBD Codes

Is your vehicle emitting excessive black smoke from the exhaust pipe? Is the engine light on in your car? If your answer is ?YES? then your there is a change that your vehicle is indicating a problem with the fuel volume regulator.

Learn More About OBD Error Code P000E

How is the fuel volume regulator connected with excessive black smoke emissions? The fuel volume regulator in a vehicle is responsible for releasing any excess fuel back into the fuel tank. The vehicle?s powertrain control module (PCM) can monitor this process by receiving abnormal signals from the fuel volume regulator in case something goes wrong and setting the error code P000E.

 

What causes this problem with Fuel Volume Regulator?

 

  • The fuel volume regulator is faulty
  • The fuel pump is faulty
  • The Fuel Volume Regulator Control is faulty
  • The Powertrain Control Module is faulty or has a programming error
  • There are open or short circuits in the Fuel Volume Control System
  • The Fuel Volume Regulator Control Valve is faulty
  • The Volume Regulator Control Harness is faulty or there are wiring problems

Replace/Repair These Parts To Fix OBD Code P000E

  1. Fuel Pump ? Is your diagnostic tool flashing error code P000E? This could be an indication that the fuel pump in your vehicle needs replacing. On the PartsAvatar website you can choose from a variety of the latest fuel pumps to find the right match for your car.
  2. Diagnostic Tool ? If your vehicle?s diagnostic tool needs replacing, you can browse our website for the best selection of diagnostic tools that will help give your car the DIY advantage.
  3. Fuel Volume Regulator ? P000E error code is all about using the right fuel volume regulator. The PartsAvatar website has a plethora of state-of-the-art fuel volume regulators that is best suited to your vehicle.
  4. Fuel Volume Sensor ? Your fuel volume regulator may be problem free, but the fuel volume sensor can be the cause. In this case, try searching for the fuel volume sensor on our website to help you find the one that solves the problem quickly and efficiently.

Symptoms Of OBD Error Code P000E

Next on our list after are common symptoms for this obd error code P000E with your fuel volume control.

 

Common Symptoms

 

  • You will see the Check Engine Light illuminate
  • Your fuel mileage decreases
  • The Engine Light is on
  • Your engine?s performance decreases
  • Your exhaust pipe emits excessive black smoke
  • Your vehicle may stall

 

This error code can come in conjunction with other Drivability Codes

How To Correct P000E Fuel Volume Regulator Control Exceeded Learning Limit

Some of the tried and true solutions for the P000E error code with Vauxhall, Nissan or any other brand include:

 

  • You need to replace the oil pump
  • You can replace the fuel volume regulator
  • You need to replace the fuel volume sensor
  • You can replace the Powertrain Control Module
  • You need to repair the wiring to the fuel volume regulator

In case the problem persists and you need parts to fix it you can have a look at our extensive collection of auto parts. We have stocked a wide range of best priced Fuel Pressure Regulators, Wirings and Auto fuses and a lot more to help you out in fixing your car.    

Easy Diagnosis Of Engine Error OBD Code P000E

It is advised that you follow fuel volume and fuel pressure testing guidelines closely as the high-pressure fuel system may cause serious harm to your body if mistreated.

Steps to Diagnose

  • Begin by using the fuel pressure gauge to check fuel system pressure and measure fuel volume.
  • Next, use your vehicle information source to obtain specifications regarding fuel pressure and fuel volume.
  • Thirdly, use a digital volt/ohmmeter (DVOM) to check for the reference voltage at the fuel volume sensor.
  • Fourthly, if both reference voltage and a ground are discovered at the fuel volume sensor connector, use the DVOM to test the fuel volume sensor itself. If the sensor fails to comply with specifications, then the problem is a faulty sensor.
  • Fifthly, test fuel volume as it is input into the fuel volume regulator valve.
  • Next, if fuel volume input is below specifications, then it could be that the fuel pump is faulty or that the fuel filter is clogged.
  • On the other hand, if the fuel volume input is within specifications, check fuel volume output at the regulator.
  • Lastly, if fuel volume output is not within specifications, use the DVOM to test the fuel volume regulator solenoid according to the manufacturer?s specifications.

Subscribe To Our Newsletters

Join our subscriber list, to get latest news, updates and special offers delivered direct in your mailbox