P2702 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The fault code P2702 can be identified as Transmission Friction Element "C" Apply Time Range/Performance. Now when we drive our vehicles, there are a lot of modules as well as computers monitor and adjust a vast amount of components and systems in order to make the vehicle's operation seamless as well as effective. Automatic transmission is one out of those components as well as systems.

It is always good to learn more! So have a look at some more information about the P2702 trouble code. The clutch solenoid is monitored by the transmission control module. This trouble code would be set by the TCM when the transmission would be not at the gear which has been commanded by the TCM.

What causes this problem with the Transmission Friction Element "C" Apply Time Range/Performance?

• Transmission control module harness might be opened or shorted
• The transmission hydraulics might be block
• Unwashed ATF
• Some complications related to transmission
• Inoperative wiring
• There can be a little ATF level
• Distorted transmission valve body
• Transmission control module might have some flaws
• There can be poor electrical connection in the transmission control module circuit

1. Transmission Fluid Pump - The first indication of any transmission related problem will the illumination Check Engine Light. Other major symptoms indicating bad transmission fluid pump can be bad shifts, delayed response and fuel burning smell coming from under the hood. Thus, immediate replacement is advisable.
2. Transmission Fluid Pump Harness - Damaged transmission fluid pump harness can cause problematic transmission performance and can lead to transmission slipping, rough shifts, fuel leakages and delayed engagements. Buy new harness now!
3. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
4. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
5. Automatic Transmission Module - A defective transmission module will affect the gear shift mechanism and also affected during acceleration and deceleration. This will lead to affected engine performance and fuel delivery system. Thus, replace faulty transmission module now!
6. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
7. Diagnostic Tools - Take the help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P2702 code by mentioning some major symptoms below:

Common Symptoms

• Leakage in the automatic transmission fluid
• Lumpy handling
• Transmission sliding
• Changeable shifting
• Untypical shift patterns
• Grinding shift selection
• The torque might be less
• Rare power output

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P2702:

• Repair or replace the faulty transmission valve body
• Recondition the quirky transmission control module
• You must fix the less ATF level
• Restore the grubby ATF
• Rebuild the mechanical issues in the transmission
• The defective shift solenoid should be mended
• If you find out that there is a stoppage in transmission hydraulics, then it should be replaced or repaired as per the need
• Replace the transmission control module circuit
• If there is an opened or shorted transmission control module harness, then you must repair it

However, if you face any issue then we have stocked a wide range of best priced tcm, atf, obd2, obd2 scanner, Obd2 bluetooth, car diagnostic tool, car scanner, transmission jack, manual transmission fluid, scan tool, honda transmission fluid, clutch solenoid, atf fluid, auto transmission, transmission fluid pump and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

Make sure that you carefully verify the integrity of your automatic transmission fluid. You can use the dipstick to check the level of the A/T with the vehicle running and in park. This procedure varies a significant amount between manufacturers. This information can usually be found quite easily with the service manual in the dash or sometimes even printed on the dipstick itself! Just make sure that the fluid is clean and free from debris. If you do not remember ever doing a transmission service, it would be a good idea to check our records and service your transmission accordingly. You'd probably be surprised how dirty ATF can affect the functionality of your transmission. You should always check ATF level on flat surface to acquire accurate readings. The manufacturer recommended fluid should always be used. Generally when you are attempting to search the connector/harness for this system, then you must search a junction connector. There might be one "master" connector, so just be sure that you are working with the right one by referring to your manual. The connector should be seated properly to ensure perfect electrical connection. Where the connector is situated on the A/T, it may be subject to vibrations that could cause connections to come loose or physically damage them. Not to mention, the possibility of ATF to saturate connectors as well as wires causing future or present problems. It is always a great decision to be aware of the overall condition of your automobile. There is a fact that other systems can directly affect other systems. Rough tires, worn out suspension parts, wrong wheel, all of these might cause problem in this system and there are some other causes as well. So that’s the reason why it is very important to get rid of this error code.

Common Mistakes When Diagnosing The P2702 Code

• There can be a failure in the internal transmission
• Defaults in the clutch solenoid
• Some issues related to the wiring
• Transmission control module failure