Error Code P0B1D: What It Means & What To Do?

<<See All OBD Codes

The trouble code P0B1D can be elucidated as Hybrid Battery Pack Voltage Sense "C" Circuit Intermittent/Erratic. It is important to know that the wrong battery voltage will affect the engine performance as well as the fuel economy. Also affected by the sluggish acceleration and the braking risk, the OBD code P0B1D error code gets stored in the PCM indicating problematic hybrid battery pack voltage sense "C" circuit problem.

Are you tensed because the P0B1D fault code is flashing? We have got everything which you need and at equitable prices. You must visit us and we promise that you will never regret your decision. The ECM sets the OBDII code when the hybrid battery pack voltage sense "C" circuit signal is out of factory specifications. The high voltage battery is composed of many individual battery cells. The battery energy control module monitors all the cells in the high voltage battery pack to make sure they are all contributing equally to the high voltage system. If one cell is determined to be unequally contributing, code P0B1D will be set.

What causes this problem with the Hybrid Battery Pack Voltage Sense "C" Circuit Intermittent/Erratic?

• Imperfect hybrid battery pack
• Issue of unbolted hybrid battery pack harness
• Unacceptable electrical connection in the hybrid battery pack circuit

1. Car Battery - Did your mechanic just found out that there is some fault in the Car Battery? Buy top notch Car Battery from us at economical prices.
2. Battery Current Sensor - A broken Battery Current Sensor can cause a lot of issues. It would be nice if you get it replaced on time.
3. Hybrid Battery - Everything is fine with the engine control module and still OBD code P0B1D flashing? Then there is definitely some fault with the Hybrid Battery. Get it checked and replace if needed.
4. Battery Coolant Pump - Battery Coolant Pump is an important car part which should never be neglected. May be there is some fault in it due to which P0B1D code may start flashing.
5. Engine Control Module - A faulty Engine Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Illumination in the service engine soon light

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• You must fix the defective hybrid battery pack harness
• Make sure to mend the faulty battery current sensor
• Repair or replace the quirky car battery
• Rehabilitate the defaults in the hybrid battery pack switch
• Carefully adjust the faults in the hybrid battery pack circuit
• It is necessary to perform proper service of the unsound hybrid battery

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of bcm, battery connectors, battery terminal connectors, electronic control module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• This is a general type of error code which is diagnosed with the help of a scanner.
• The mechanic will insert a scanner to diagnostic port of the vehicle and recover the codes and freeze frame data.
• If he happens to find any additional error codes, he has to address them as well.
• Once it is done, he has to reset the vehicle, and then test drive to see if the error code appears.
• If the error code does not return, then there can be an erratic condition.
• But, if the error code returns, then the mechanic has to check the hybrid battery.
• Also, the mechanic can check for any sign of defaults in the battery current sensor, and quickly fix the issue.
• Then the mechanic has to check the wires, connectors and other electrical components and quickly replace them if he finds them to be damaged or defective.
• If the issues are not yet sorted out, then the mechanic will use a digital voltmeter/ ohmmeter and connect it to the vehicle.
• Once the circuit is inspected, he will thoroughly check all the harness and repair them accordingly.
• In most cases, this error code can arise mostly because of faulty hybrid battery.
• Whenever the mechanic or a trained professional, repairs any of the component like wires or connectors, he will reset the code and test drive the vehicle again to see if the error code appears again.
• This can actually help the mechanic to know if the problem is fixed.

Common Mistakes When Diagnosing The P0B1D Code

• Malfunctioning battery contactor assembly
• There can be a failure in the battery energy control module