Guide To P0B1B OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0B1B can be explained as Hybrid Battery Pack Voltage Sense "C" Circuit Low. Are you experiencing sluggish performance and acceleration? Is there a problem with the engine performance and affected fuel economy? All this with lights keeping stayed on due to high voltage may be due to vehicle battery problems leading to OBD code P0B1B error getting stored in the PCM.

Do you want to know more about the P0B1B fault code? Don’t worry! Parts Avatar Canada is here at your service. The hybrid battery is being monitored by the engine control module. This trouble code would be set by the ECM when the hybrid battery would not be as per the specifications set by the manufacturer.

What causes this problem with the Hybrid Battery Pack Voltage Sense "C" Circuit Low?

• There can be inoperative hybrid battery pack
• There can be opened or shorted hybrid battery pack harness
• Hybrid battery pack circuit inferior electrical connection

1. Battery Current Sensor - Defective car Battery Current Sensor can be a major reason why P0B1B code depicts. So make sure to replace it online so that you don’t have to face any further issues.
2. Car Battery - Everything is okay with the ECM and still OBD code P0B1B triggering? Then there must be some defects in Car Battery. Replace them as soon as possible.
3. Battery Coolant Pump - P0B1B code flashing? Get your Battery Coolant Pump inspected from a mechanic.
4. Engine Control Module - If everything is alright with Battery Coolant Pump, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
5. Powertrain Control Module - P0B1B code can display due to some issues in the Powertrain Control Module. So it is very important to replace the Powertrain Control Module with us at equitable prices.
6. Hybrid Battery - Do you remember when was the last time you got your car Hybrid Battery checked up? A dirty Hybrid Battery can cause a lot of issues like displaying P0B1B code.
7. Electronic Control Unit - Are there some faults in your Electronic Control Unit? Don’t waste time and get them replaced or else P0B1B code can turn up.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P0B1B? Your wish is our demand. Have a look at them below:

Common Symptoms

• Appearance of the service engine soon light

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Make sure to fix the defective car battery
• It is very important to fix the faulty hybrid battery pack switch
• It is essential to restore the flawed hybrid battery pack circuit
• Rehabilitate the defaults in the battery current sensor
• The malfunctioning hybrid battery should be repaired or replaced as per the need
• Carefully adjust the faults in the hybrid battery pack

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of bcm, battery connectors, battery terminal connectors, electronic control module and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0B1B code to be stored:

• The mechanic or the technician will use a diagnostic scanner or code reader like DVOM to visually scan for the error codes in the vehicle.
• After performing a careful inspection, every of the stored codes and freeze frame data are retrieved as it can help down the way for further diagnosis process.
• Most often he has to inspect the solenoid itself to see if they are faulty or damaged. Additional error codes that are stored in the vehicle are also addressed.
• The mechanic performs a continuity test between the PCM and solenoid to check the resistance.
• If the battery current sensor and the hybrid battery pack are not faulty, he will then retune the code and test drive the vehicle.
• Now when the car is taken out for a test drive, if the P0B1B code does not return soon, he will know that there is an existence of erratic condition.

Common Mistakes When Diagnosing The P0B1B Code

• There can be a failure in the battery contactor assembly
  
• Defaults in the battery energy control module