P0B1A OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0B1A can be defined as Hybrid Battery Pack Voltage Sense "C" Circuit Range/Performance. If the engine control module would detect a variation in the voltage coming from the hybrid battery that is outside the parameters set by the automobile manufacturer, then it would store the P0B1A fault code. This would give rise to the flashing up of the check engine light.

It is always good to learn more! That is the reason why we are here to help you out in gaining more knowledge about the P0B1A error code. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. The engine control module, powertrain control module or the transmission control module monitors this circuit depending upon the particular automobile.

What causes this problem with the Hybrid Battery Pack Voltage Sense "C" Circuit Range/Performance?

• Flaws in the hybrid battery pack
• Hybrid battery pack harness might be opened or shorted
• Hybrid battery pack circuit might have bad electrical connection

1. Car Battery - There can be some issues with the Car Battery due to which you may see P0B1A code appearing over and over again. Visit us to buy best quality Car Battery online.
2. Electronic Control Unit - A lot of issues can arise do to defective Electronic Control Unit. Did you just see P0B1A code flashing? Now you know the reason why it is appearing. Get it inspected and replaced on time.
3. Body Control Module Component - Faulty Body Control Module Component can be the reason why P0B1A code is flashing. Visit us to purchase top notch Body Control Module Component online.
4. Heater Blower Assembly - It is an important auto part which needs full care. A faulty Heater Blower Assembly can be a reason behind the flashing up of P0B1A code.
5. Battery Smart Unit - OBD Code P0B1A can appear because of faulty Battery Smart Unit.
6. Hybrid Battery - There can be some issues with the Hybrid Battery due to which you may see P0B1A code appearing over and over again. Visit us to buy best quality Hybrid Battery online.
7. Engine Control Module - Are you facing some faults in your Engine Control Module? Don’t worry and get them replaced or else P0B1A code can turn up.
8. Powertrain Control Module - Common cause behind this P0B1A error code can be some fault in Powertrain Control Module. So it will be a good decision to replace them now.

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P0B1A code by mentioning some major symptoms below:

Common Symptoms

• Check engine light can start flashing up

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0B1A:

• Make sure to mend the faulty HV battery
• Repair or replace the quirky HV battery pack circuit
• It is essential to restore the flawed hybrid battery pack
• You must fix the defective hybrid battery pack harness
• Rehabilitate the defaults in the engine control module
• Adjust the flawed electronic control unit

However, if you face any issue then we have stocked a wide range of best priced bcm, battery connectors, battery terminal connectors, electronic control module and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• As an initial step the mechanic will carefully inspect the vehicle with the help of a scanner.
• After this, the technician will connect a scanner to the diagnostic code so that he can recover all the codes and freeze frame data.
• Note down this information as it can clearly help for further diagnosis.
• After careful inspection, he will reset the code and test drive your vehicle to check for reappearance of the codes.
• He will know that an intermittent condition persist, if the code does not return instantly.
• But if the error code returns quickly, the vehicle is test driven, and then he has to inspect the hybrid battery.
• If any of the component is damaged, the mechanic will replace them quickly.
• Most often, whenever the mechanic carries out any repair work, he will reset the code and test drive your car, to check if the codes return immediately. This can preferably help the mechanic to know what caused this error code in the vehicle.

Common Mistakes When Diagnosing The P0B1A Code

• Some issues related to the battery contactor assembly
• Failure in the battery energy control module