P0AD6 OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P0AD6 can be defined as Hybrid Battery Pack Air Flow Valve ‘A’ Control Circuit Range/Performance. There is a ventilation system in the hybrid battery pack so that it can maintain perfect battery operating temperature. The battery pack airflow control valve would control how much air is allowed to flow through the system. Now if the airflow valve would not operate as per the request, then the P0AD6 trouble code would start triggering up.

This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code. The P0AD6 trouble code would indicate that a hybrid battery pack air flow valve ‘A’ control circuit which is not as per the predetermined limit has been detected by the ECM. Now when this would occur, the fault code would be stored and there would be an illumination of the malfunction indicator light.

What causes this problem with the Hybrid Battery Pack Air Flow Valve ‘A’ Control Circuit Range/Performance?

• Some flaws in the hybrid battery pack cooling fan
• Hybrid battery pack cooling fan harness might be opened or sometimes shorted
• Hybrid battery pack cooling fan circuit might have inadequate electrical connection

1. Battery Temperature Sensor - The temperature sensor is important to keep the battery from overheating. Thus, if the temperature sensor is faulty, it must be replaced immediately. Buy new temperature sensor from us at equitable prices now!
2. Hybrid Battery - Faulty hybrid battery may overheat or discharge quickly, causing drivability issues. It can affect the acceleration and throttle response and can also cause damage to various parts. Replace the faulty hybrid battery now!
3. Engine Control Module - There can be some engine performance issues due to faulty engine control module. If the ECM fails or has any problems it can lead to performance issues with the vehicle like misfires, hesitation, loss of power, and sometimes even decreased fuel economy.
4. Powertrain Control Module - PCM stands for powertrain control module. It is a car part, a control unit which is utilized on motor vehicles. It is generally a combined control unit, consisting of the engine control unit (ECU) and the transmission control unit (TCU).
5. Inverter Cooler Pump - Inverter cooler pump is responsible for keeping the boost converter temperatures under control. Thus, if it is not functioning properly, the converter can overheat and result in underperformance of the system. Buy new cooler pump and replace in now!
6. Electronic Control Unit - If your automobile's check engine light remains on constantly, and never goes off, there's a good chance that your vehicle has a damaged electronic control unit. There are a lot of reasons why a car's check engine light will remain on. The most common reason is a defective ECU.
7. Diagnostic Tool - You will need high grade diagnostic tools for correction of the OBD error code which is detected. Visit us today to grab amazing deals.

Our main motive is to achieve customer satisfaction as for us our customers are everything and that’s why we will help you to diagnose P0AD6 code by mentioning some major symptoms below:

Common Symptoms

• The service engine soon light can start lighting up
• The high voltage system might not be operating properly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0AD6:

• Rehabilitate the defaults in the hybrid battery pack cooling fan
• It is essential to restore the flawed hybrid battery pack cooling fan harness
• Repair or replace the quirky powertrain control module
• Carefully adjust the faults in the hybrid battery pack cooling fan circuit
• Recondition the non-functioning hybrid battery junction block

However, if you face any issue then we have stocked a wide range of best priced HV battery temperature sensor, HV battery assembly, hybrid battery pack cooling fan, HV battery assembly harness, hv battery, pcm, ecm, ecu, pcm module, ecm module and more to help you out in fixing your car.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the Hybrid Battery Pack Air Flow Valve ‘A’ Control Circuit and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further be helping the cause.
• The P0AD6 error is triggered if there is a physical problem with the Hybrid Battery Pack Air Flow Valve ‘A’ Control Circuit which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P0AD6 Code

• Non-performance of the battery control module
• Defaults in the high voltage battery pack airflow control valve
• The battery airflow passageway might be clogged
• Flaws in the wiring