P0AD4 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0AD4 can be described as Hybrid Battery Pack Air Flow System Insufficient Air Flow. A lot of different modules are used by the automobiles to run self-checks on the high voltage system. Now if any default is found by any of the modules, then the P0AD4 error code would be set. There might be storage of additional codes in other modules.

The P0AD4 error code would start indicating that hybrid battery pack cooling fan has set an emission associated hybrid powertrain code. The hybrid battery pack cooling fan would send a message via serial data circuit to the engine control module (ECM) requesting illumination of the Malfunction Indicator Light (MIL). Now when the engine control module would receive this message, then the P0AD4 fault code would be triggered up.

What causes this problem with the Hybrid Battery Pack Air Flow System Insufficient Air Flow?

• Defaults in the hybrid battery pack cooling fan
• Hybrid battery pack cooling fan harness might be opened or shorted
• Hybrid battery pack cooling fan circuit might have poor electrical connection

1. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
2. Hybrid Battery - Faulty hybrid battery may overheat or discharge quickly, causing drivability issues. It can affect the acceleration and throttle response and can also cause damage to various parts. Replace the faulty hybrid battery now!
3. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
4. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
5. Diagnostic Tool - Find high grade diagnostic tools to detect the OBD error code from us. Visit us today to grab amazing deals.
6. Battery Temperature Sensor - Faulty temperature sensor can misinterpret the battery temperatures which can result in battery overheating and leakages inside the battery that can harm various components and can be dangerous to driver’s safety also. Thus, replace it at first instance.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0AD4 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light
• High voltage system might not function properly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0AD4:

• It is essential to restore the flawed hybrid battery pack cooling fan
• Repair or replace the quirky hybrid battery pack cooling fan circuit
• Rehabilitate the defaults in the ECM
• The hybrid battery pack cooling fan harness should be restored to working order

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of battery control module, hybrid battery, pcm, ecm, ecu, pcm module and ecm module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Check for wires and connectors that might be rubbed through, disconnected or loose. It is also important to check the fuse box in your vehicle together with the relay centre that can be found under the hood.
• It is also important to make sure that the fuses are good. Make sure that there is no melted plastic that can cause fire.
• These are some of the major wiring problems that you will encounter with error code P0AD4.
• Carefully inspect the hybrid battery pack air flow system parts and make sure to repair or replace it if found faulty.
• Once you have completely checked all the obvious things and still you can’t find the right solution, then you have to begin suspecting either the computer or the sensor.

Common Mistakes When Diagnosing The P0AD4 Code

• Defaults in the battery airflow passageway
• There might be a need of further diagnostics of the hybrid system
• Some issues related to the high voltage battery cooling fan