Guide To P0A33 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0A33 can be explained as Drive Motor "B" Temperature Sensor Circuit High. If the PCM would detect a variation in the voltage coming from the drive motor "B" temperature sensor circuit that is outside the parameters set by the automobile manufacturer, then it would store the P0A33 error code. This would also give rise to the illumination of the check engine light.

We believe that an investment in knowledge pays the best interest. So why not learn more about the P0A33 error code? This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model.

What causes this problem with the Drive Motor "B" Temperature Sensor Circuit High?

• Drive motor B temperature sensor circuit faulty
• Drive motor B temperature sensor harness is open or small
• Poor electrical wiring and connector issue to the sensor circuit
• ECU faulty that might need repairs

1. Powertrain Control Module - A faulty Powertrain Control Module can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Engine Control Module - There can be some issues with the Engine Control Module due to which you may see P0A33 code appearing over and over again. Visit us to buy best quality Engine Control Module online.
3. Engine Wiring Connectors - Check for faulty wiring connectors and replace it now!
4. Electronic Control Unit - It is important to know that the ECU faults can also lead to OBD code getting stored in the system. Thus, buy new ECU components from us!
5. Diagnostic Tools - Use professional diagnostic tools to detect and diagnose the OBD error problem. Buy best tools and equipment from us.

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P0A33 here:

Common Symptoms

• Malfunction Indicator Light ON
• Engine misfires
• Engine no starting
• Lean engine condition
• Affected drivability

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Make sure to mend the faulty engine control module
• Repair or replace the drive motor B temperature sensor
• Resolve sensor circuit faults in relation to poor connectors and wiring and connector issues
• Repair ECU and PCM faults as required
• Check and correct intake manifold and oxygen sensor problems

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Temperature Sensor, Drive Motor, Motor Harness, Engine Control Module and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• A careful inspection of the vehicle is carried out by the mechanic with the help of a scanner.
• After this inspection, he will recover every stored code in the vehicle as well as freeze frame data by inserting a scanner to the diagnostic port of the vehicle.
• He will store this information as it may help him with further diagnosis.
• After the codes are recovered, the vehicle is reset, test- driven to check for the occurrence of the error code.
• He will clearly know that an erratic condition has prevailed if the code does not return quickly.
• But if the code returns instantly, he will then start inspecting the transmission fluid for any leaks.
• In some cases, the transmission fluid can be dirty or it can be contaminated.
• The area of leak will be found and fixed. The dirty or contaminated fluid should be replaced with clear fluid.
• Sometimes the fluid may be not be filled at the correct level, which the mechanic will find during diagnosis. Sometimes, the solenoid itself can be defective which has to be checked for any damages.
• After this, the technician will visually inspect every wires, connectors, harness and fuses for any possible damages or defective and repairs them as needed.
• You must always know that once the error code is repaired, it is always the best idea to test drive and check the vehicle if the error code appears again which can help the technician to know the area of fault and as to how the error code occurred in the vehicle.
• This can easily help the mechanic to fix the error code.

Common Mistakes When Diagnosing the P0A33 Code

The most common mistake while diagnosing this code is missing out on diagnosing steps which further leads to the expensive and unnecessary replacements. It is always recommended to seek help of experienced diagnostician to avoid any mistakes.