Guide To P0927 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P0927 can be elucidated as Gear Shift Reverse Actuator Circuit High. This diagnostic fault code is a generic powertrain code, which means that it would apply to the OBD-II equipped vehicles. The specific repair steps can vary as it depends upon the vehicle make and model. The P0927 error code means that the ECM has found a signal indicating the voltage within the gear shift reverse actuator was higher than normal parameters.

Want to learn something more about the P0927 fault code? One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. This trouble code would indicate that the powertrain control module has detected an issue in the operation of the gear shift reverse actuator of the transmission. It main function of the gear shift reverse actuator is to control how an automobile’s transmission shifts into reverse gear.

What causes this problem with the Gear Shift Reverse Actuator Circuit High?

• Faulty gear shift reverse actuator circuit
• Transmission might be flawed
• Some mechanical issues may exist

1. Catalytic Converter - Defective car Catalytic Converter can be a major reason why P0927 code depicts. So make sure to replace it online so that you don’t have to face any further issues.
2. Auto Transmission Control Module - Everything is okay with the Catalytic Converter and still OBD code P0927 triggering? Then there must be some defects in Auto Transmission Control Module. Replace them as soon as possible.
3. Muffler - P0927 code flashing? Get your Muffler inspected from a mechanic.
4. Engine Control Module - If everything is alright with Auto Transmission Control Module, then there is surely some defect in Engine Control Module. Get it replaced before the situation gets worse.
5. Exhaust System Parts - P0927 code can display due to some issues in the Exhaust System Parts. So it is very important to replace the Exhaust System Parts with us at equitable prices.
6. Powertrain Control Module - Do you remember when was the last time you got your car Powertrain Control Module checked up? A dirty Powertrain Control Module can cause a lot of issues like displaying P0927 code.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Helplessness to shift into reverse gear
• Decrease in the overall fuel efficiency

The repairs which you will have to do to correct this fault code are simply straightforward; you can surely pinpoint the necessary repairs on the basis of your diagnosis. Have a look at some common fixes:

• Rehabilitate the defaults in the guide rail or shift shaft
• The malfunctioning transmission should be repaired or replaced as per the need
• Make sure to mend the faulty wirings
• It is essential to restore the flawed ECM
• Carefully adjust the faults in the gear shift reverse actuator circuit

There is noneed to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of custom exhaust, dual exhaust tips, exhaust catalyst, truck mufflers, car catalyst, true dual exhaust and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

A well qualified mechanic should check if the P0927 error code is existing using a scan tool before he moves further for the diagnosis process. The mechanic can also check to see if there is presence of additional trouble codes. Now if there are a number of codes, then they should be addressed in the same order in which they are appearing on the scanner. After that the mechanic should reset the trouble codes, restart the vehicle, and check to see if the code remains detected. If it does not, then the code was likely triggered incorrectly, or represents an intermittent issue.

Common Mistakes When Diagnosing The P0927 Code

• A mistake which is made by a lot of technicians is that they do not verify the high voltage which is running gear shift reverse actuator.
• The transmission as well as constituents which are related to the reverse gear should be visually examined.
• Most of the times the mechanic might simply forget to clear this error code even when the problem has been fixed.