P0924 - OBD Trouble Code

<<See All OBD Codes

The trouble code P0924 can be described as Gear Shift Reverse Actuator Circuit/Open. It is the transmission control module which would examine the gear shift reverse actuator. This trouble code would be set by the TCM when the gear shift reverse actuator would not be as per the parameters set by the manufacturer. This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle make to another.

Don’t worry if P0924 error code is triggering again and again. We offer a wide range of auto parts at affordable prices to our dear customers. This code is a generic trouble code, meaning it applies to all vehicles equipped with the OBD-II system, especially those made from 1996 up to present. It’s also more common among Audi, Citroen, Chevrolet, Ford, Hyundai, Nissan, Peugeot, and Volkswagen vehicles. Specifications on the definition, troubleshooting, and repairs, of course, vary from one make and model, powertrain configuration type, to another.

What causes this problem with the Gear Shift Reverse Actuator Circuit/Open?

• Issue of bad electrical connection in the gear shift reverse actuator circuit
• There can be inoperative gear shift reverse actuator
• There can be opened or shorted gear shift reverse actuator harness

1. Engine Control Module - Do you remember when was the last time you got your car Engine Control Module checked up? A dirty Engine Control Module can cause a lot of issues like displaying P0924 code.
2. Automatic Transmission Connector - Poor Automatic Transmission Connector can cause a lot of difficulties, so why not get it replaced at time?
3. Auto Transmission Shift Solenoid - Are there some faults in your Auto Transmission Shift Solenoid? Don’t waste time and get them replaced or else P0924 code can turn up.
4. Powertrain Control Module - OBD Code P0924 can appear because of faulty Powertrain Control Module. Visit Parts Avatar Canada to purchase top notch PCM online as affordable prices.
5. Timing Gear - Everything is fine with Auto Transmission Control Module and still P0924 code triggering? Then you must get your Timing Gear checked.
6. Auto Transmission Control Module - There can be some issues with the Auto Transmission Control Module due to which you may see P0924 code appearing over and over again. Visit us to buy best quality Auto Transmission Control Module online.

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0924 code by mentioning some major symptoms below:

Common Symptoms

• Increase in the overall fuel consumption
• Transmission unable to skid properly

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P0924:

• It is essential to restore the quirky transmission
• You must fix the flaws in the fluid pressure
• Make sure to mend the faulty TCM
• Rehabilitate the defaults in the gear shift reverse actuator

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of CVT Transmission, Manual Transmission Fluid and many more. Now all your problems would vanish within no time.

Do you want to easily diagnose the P0924 error code? Then you have arrived at the right place as here are some steps which you should follow in order to diagnose this fault code:

The P0924 fault code can be diagnosed by using an OBD-II trouble code scanner. A scanner should be used by a professional technician to notice the freeze frame data, to assemble details about the code. The mechanic can also check to see if there is presence of additional trouble codes. Now if there are a number of codes, then they should be addressed in the same order in which they are appearing on the scanner. After that the mechanic should reset the trouble codes, restart the vehicle, and check to see if the code remains detected. If it does not, then the code was likely triggered incorrectly or would represent an intermittent issue.

Common Mistakes When Diagnosing The P0924 Code

• Malfunctioning gear shift actuator assembly
• There can be some wiring associated problems
• Transmission control module might start failing