Guide To P0919 OBD Error Code Solutions

<<See All OBD Codes

Error code P0919? Can’t comprehend the code? Well, the Parts Avatar guide is all you need to comprehend the error code. The OBD-II code P0919 known as the gear shift position sensor error sets in due to a possible failure in the transmission control module (TCM). Mostly, it can be observed that the manual transmissions have a sensor installed located in the shift lever that plays the role of updating the engine computer (PCM) about the gear the transmission is in. the PCM sets in the code P0919 when it receives an improbable signal from the shift lever position sensor. The shift lever has the shift lever position sensor installed in it.

Generally, it is observed that the check engine light illuminates when if the percentage of the rise or fall in revolutions per minute is between 2 percent and 10 percent. The check engine light is observed blinking on and off to alert the driver of a severe misfiring problem if the percentage of the rise or fall in revolutions per minute (RPM) is greater than 10 percent. When an error code P0919 is stored it signals at a misfire in random or numerous cylinder.

What causes this problem with the Gear Shift Position Control Error?

• A malfunctioning gear shift position sensor gear
• Short circuited or open shift position sensor harness
• A weak electrical connection in the gear shift position sensor circuit

1. Engine control module - Defective engine control module can end up being the chief host inviting the error code P0919. So replacing one can be one of the wisest decisions to avoid a problematic system.
2. Transmission control module - Having problems with the transmission control module? Don’t you worry, Parts Avatar has it all. A faulty transmission control module could end up being the root cause behind the error code P0919.
3. Gear shift position sensor - A loose or damaged gear shift position sensor can be troublesome. In order to fix your error code P0919, get your gear shift position sensor mended or restored immediately.
4. Powertrain control module - Get your error code fixed instantly with a new powertrain control module. Parts Avatar right place that provides the best PCMs across the country.
5. Shift lever position sensor - Facing the error code P0919? An inferior quality shift lever position sensor can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P0919. Tune into Parts Avatar for supreme quality shift lever position sensor at economical prices.
6. Shift lever assembly - Facing the error code P0919? Well, get that fixed with a new shift lever assembly at Parts Avatar available online at the budget friendly prices.

Interested in knowing the symptoms to obd code P0919? If yes, then you have arrived at the right place. We at PartsAvatar have listed out few common symptoms associated with this fuel injector problem.

Common Symptoms:

It should be noted that the intensity of the error may differ from one case to another. Most commonly, the P0919 error code leads to a gear shift error causing in the vehicle’s inability to shift gears. This often results in the vehicle becoming completely inactive.

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue you need to follow certain steps, and to solve OBD error code P0919, you will need to undergo the following replacements:

• Malfunctioning sensors misreading the problem should be repaired or replaced as per the requirements
• The electrical parts linked to the gearshift mechanism should be checked along with any other components that are defective and unsound, if the sensors are working accurately.
• All the wirings should be visually inspected. The corroded or damaged ones should be mended or restored
• It is advised to clear the codes and the test the vehicle after a number of repairs have been performed to see if the issue has been solved or not
• In a rare case, a malfunctioning PCM can be the cause of triggering the error code P0919 and would require a replacement. In such a situation, the related control modules will require a reprogramming as well.

If you need parts to fix this issue, you no longer need to search for them. We at PartsAvatar Canada have an extensive range of auto parts in stock from you, engine control module, transmission control module, gear shift position sensor, powertrain control module, shift lever position sensor, shift lever assembly, diesel particulate filter, automatic transmission filter, gear shift, body control module, shift solenoid, automatic shift knobs, transmission sensor, transmission shift solenoid, shift lock solenoid, shift interlock solenoid, transmission shifter, solenoid sensor, transmission control system ranging from all replacement parts to all interior and exterior parts.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

To diagnose the code,an OBD-II code reader should be employed in order to verify the code. The sensors recording the error should be first checked if they are working in order or not. The parts linked to the gear shift transmission should be thoroughly inspected, if the sensors appear to function order. Next, it is recommended to visually check wirings and circuitry related to the transmission for any traces of corrosion or damage.

Common Mistakes When Diagnosing the P0919 Code

Here listed are a few common mistakes that should be avoided while diagnosing the error code P0919:

• A possible fault in the shift lever assembly
• A defective transmission control module (TCM)
• Faults with the wiring