P0916 - OBD Trouble Code

<<See All OBD Codes

Error code P0916? Don’t know what to do? Well, here’s how you can simply comprehend and crack the error code P0916. The OBD-II code P0916 determined as a gear shift position circuit low is a transmission control module malfunction. The engine computer in informed about the gear the transmission is in by the sensor that is located in the shift lever found in the manual transmission. If the PCM receives an impractical signal from the shift lever position sensor, the code P0916 sets in. A decreased transmission fluid level may be observed.

It should be noted that the gear shift position sensor is regulated by the transmission control module (TCM). The OBD-II code P0916 is stored by the transmission control module when the gear shift position sensor fails to work according to the manufacturer’ specifications.

What causes this problem with the Gear Shift Position Circuit Low?

• Possibly a faulty gear shift position sensor gear
• Open or short circuited shift position sensor harness
• A powerless electrical connection in the gear shift position sensor circuit

1. Engine control module - A lot of problems can arise due to a malfunctioning engine control module. So it is recommended to fix the engine control module in order to fight the complications caused by the error code P0916.
2. Transmission control module - A distorted transmission control module can end up being the chief host inviting the error code P0916. So replacing one can be one of the wisest decisions to avoid a problematic system.
3. Gear shift position sensor - Facing the error code P0916? Well, get that fixed with a new gear shift position sensor available online at Parts Avatar at the best prices.
4. Powertrain control module - A PCM is an essential unit. So it is advised to change it right away. Don’t know where to get it from? Well, you can get it now from Parts Avatar right at your doorstep.
5. Shift lever position sensor - Having problems with the shift lever position sensor? Don’t you worry, Parts Avatar has it all. A faulty shift lever position sensor could end up being the root cause behind the error code P0916.
6. Shift lever assembly - Get your error code fixed instantly with a new shift lever assembly. Parts Avatar right place that provides the premium quality shift lever assembly across the country.

Well, if you are looking to know about the common symptoms related to this error code P0916, we are have worked out a small list to help you discover this error code with your vehicle.

Common Symptoms

• An illuminated check engine light (or service engine soon warning light)

Once you know the symptoms of your vehicle’s problem, it becomes easy to detect it and get started with solving it. So, next on our list is few common steps to correct this issue with your vehicle:

• A malfunctioning gear shift position sensor should be mended in order to avoid further complications
• All the wirings and harnesses should be visually inspected. Corroded or short circuited ones should be changed immediately
• The technician should surely check the electrical connection in the gear shift position sensor. Amendments should be made to fix the weak electrical connection running in the circuits of the gear shift position sensor.

Apart from the fuel injector, you might need to undergo few more replacements. You might need engine control module, transmission control module, gear shift position sensor, powertrain control module, shift lever position sensor, shift lever assembly, diesel particulate filter, gearshift, body control module, shift solenoid, transmission sensor, transmission shift solenoid, shift lock solenoid, shift interlock solenoid, automatic shift knobs, transmission shifter, transmission control system, solenoid sensor and many other parts. Where to get them from? Well, if you want quality parts, then we can prove to be your dream destination.

Here listed are a few steps that should be followed in order to perform accurate diagnosis:

• In order to successfully diagnose this error code-storing condition, a scanner (or code reader) and a digital volt/ohmmeter should be used as it will be quite helpful.
• Any open, short circuited, defective, or corroded components should be mended or restored as per the requirements and the system should be retested to make sure that repairs were successful. If the system wiring, connectors, and components appear to be functioning as per the specified order, the scanner should be connected to the diagnostic connector and all stored trouble codes and freeze frame data should be recorded.
• It should be noted that this information can be very helpful in diagnosing intermittent conditions that may have contributed to this code being stored.
• Next, the codes should be cleared and the vehicle should be test driven to see if the code reappears.

Common Mistakes When Diagnosing the P0916 Code

Here listed are a few common mistakes that should be avoided while diagnosing the error code P0916:

• A possible failure in the shift lever assembly
• A malfunctioning transmission control module (TCM)
• Problems with the wiring

P0914 - Gear Shift Position Circuit

P0915 - Gear Shift Position Circuit Range/Performance

P0917 - Gear Shift Position Circuit High

P0918 - Gear Shift Position Circuit Intermittent

P0919 - Gear Shift Position Control Error