P082F OBD Error Code: Problem & Solutions

<<See All OBD Codes

Want to crack the error code P082F? Well, with Parts Avatar you can do it easily no time. The OBD-II code P082F sets in when the powertrain control module malfunctions. This powertrain control module (PCM) failure is often determined as a gear lever x position circuit high. Generally, it is the gear lever position sensor that performs the function of informing the engine computer (PCM) about what gear the transmission is currently in. the sensor is installed in the shift lever. The code P082F is stored when the gear lever position sensor transmits an impractical signal to the PCM

It is observed that the code P082F flashes when the PCM receives an unworkable signal from the gear lever position sensor. The gear lever position sensor also informs the engine computer about the gear the transmission is in. the sensor is located in the shift lever itself.

What causes this problem with the Gear Lever Y Position Circuit High?

• A possible fault in the gear lever x position sensor
• The harness of the gear lever x position sensor disconnected or shorted
• A weak electrical connection gear lever x position sensor circuit
• A failure in the powertrain control module

1. Transmission Parts - Having problems with the transmission? Don’t you worry, Parts Avatar has it all. A faulty transmission could end up being the root cause behind the error code P082F.
2. Sensor - A damaged sensor can end up being the chief host inviting the error code P082F. So replacing one can be one of the wisest decisions to avoid a problematic system.
3. Powertrain Control Module - Often regarded as the brain of the system, this essential unit should be changed immediately. Now get premium quality PCMs at your doorstep. Log into Parts Avatar now.
4. Fuel Metering - A suitable fuel metering is very important for the system to work in order. Change yours now in order to precisely cure the error code P082F
5. Engine Timing Parts - Amendments should be made in order to achieve proper engine timing. It should be noted that a inappropriate engine timing can be troublesome.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD code P082F here:

Common Symptoms

• Possibly a transmission shift shock
• An illuminated engine light (or a Service Engine Soon Warning Light)

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD code P082F:

• Repair or replace a distorted gear lever x position sensor.
• A poor electrical connection running through the gear lever x position sensor circuit should be treated and fixed.
• Corroded or loose harness of the gear lever x position sensor should be checked and restored if required.

However, if you face any issue then we have stocked a wide range of best priced transmission, sensor, PCM, fuel metering, engine timing, fuel injectors, fuel injector harness, body control module, injection pump, fuel injection kit, fuel injection tester, fuel injection conversion kit, diesel fuel injectors, transmission control module, electronic control module more to help you out in fixing your car.

Willing to diagnose the error code P082F accurately? Well, here listed are few steps that will definitely help you to diagnose the error code P082F

To start with, the technician will make use of a scanner (code reader) or a digital ohmmeter that are the two basic diagnostic tools that are extremely important for a precise diagnosis of the code P082F. The role of determining the gear the transmission is placed in is performed by the transmission range sensor. If by any chance, the voltage appears to absent, then a circuit issue should most likely be examined and observed. The consequences of which can lead to a weak or poor electrical connection. It could trigger because of either an open in the ground or battery voltage for which a digital volt/ohmmeter should be utilized to check for continuity and resistance in both the circuits. All the corroded, damaged or loosened electrical components can lead to worsening the code as well as the system. While diagnosing it is advised to refer to manufacturer’s specification manual. Also, in order to ensure a precise diagnosis, the system should be examined and the vehicle should be test driven in order to make sure the code has vanished completely.