P082D - OBD Trouble Code

<<See All OBD Codes

Baffled? Don’t know where to start from? Well, here’s a brief guide about the error code P082D that’ll surely help you. The OBD-II code P082D, a powertrain control module (PCM) failure is mostly determined as the gear lever x position circuit high issue. The responsibility of informing the engine computer (PCM) about the what gear the transmission is in is played by the gear lever position sensor. It should be noted that this sensor is located and installed in the shift lever itself. The code P082D is set when the PCM receives an improbable signal from the gear lever x position sensor.

Still not getting it? Don't worry, we have much more in store for you.

When the PCM receives a completely unworkable signal from the gear lever x position sensor the code P082D is stored. The task of updating the engine computer about the gear the transmission is in is undertaken by the gear lever x position sensor. Generally, the sensor is assembled in the shift lever.

What causes this problem with the Gear Lever Y Position Circuit Range/Performance?

• A distorted gear lever x position sensor
• Loose or short-circuited harness of the gear lever x position sensor
• A weak electrical connection running in the gear lever x position sensor circuit

1. Transmission Parts - Facing the error code P082D? An inferior quality transmission can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P082D. Tune into Parts Avatar for supreme quality transmission at economical prices.
2. Sensor - Having problems with the sensor? Don’t you worry, Parts Avatar has it all. A faulty sensor could end up being the root cause behind the error code P082D.
3. Powertrain Control Module - A distorted powertrain control module can end up being the chief host inviting the error code P082D. So, replacing one can be one of the wisest decisions to avoid a problematic system.
4. Fuel Metering - Facing the error code P082D? Well, get that fixed by fixing your fuel metering at Parts Avatar available online at the pocket friendly prices.
5. Engine Timing Parts - The engine timing is something that one should be careful of. An inappropriate timing should be fixed instantly to fight the complications caused by the error code P082D.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD code P082D here:

Common Symptoms

• Mostly the driver will experience a transmission shift shock
• Engine light illuminated (or the service engine soon warning light)

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD code P082D:

• In order to set the diagnosis in motion, the mechanic should perform a visual inspection of the electrical components attentively.
• Any corroded or disconnected wirings and connectors in the gear lever x position sensor should be replaced or repaired.
• A malfunctioning gear lever x position sensor should be restored if necessary.
• Amendments should be made to fix a weak electrical connection.

However, if you face any issue then we have stocked a wide range of best priced transmission, sensor, PCM, fuel metering, engine timing, fuel injectors, fuel injector harness, body control module, injection pump, fuel injection kit, fuel injection tester, fuel injection conversion kit, diesel fuel injectors, transmission control module, electronic control module, performance fuel injector, brake control module, engine control unit, engine harness and more to help you out in fixing your car.

Willing to diagnose the error code P082D accurately? Well, here listed are few steps that will definitely help you to diagnose the error code P082D

In order to commence the diagnosis, make use of a scanner (code reader) or a digital ohmmeter that are the two tools highly important for a precise diagnosis of the code P082D. It should be noted that the transmission range sensor performs the role of determining the gear the transmission is placed in. If in any case the voltage appears to be lacking, then a circuit issue should most likely be tested and observed. As a result, a weak or poor electrical connection may be noted too. Either an open in the ground or battery voltage might be the reason, for which a digital volt/ohmmeter should be utilized to check for continuity and resistance in both the circuits. All the corroded, damaged or loosened electrical components can lead to worsening the code as well as the system. While performing the diagnosis it is highly recommended to refer to manufacturer’s specification manual. Also, in order to ensure a precise diagnosis, the system should be retested and the vehicle should be test driven in order to make sure the code has been corrected completely.