Guide To P07A0 OBD Error Code Solutions

<<See All OBD Codes

The trouble code P07A0 can be explained as Transmission Friction Element "G" Slip Detected.

If there are some issues with the internal friction materials in the automatic transmission, it will then lead to unpredictable driving conditions as far as shift timing, torque output and many other complications. Internal slippage can be caused due to uncommon paired tires, insufficient inflated tires.

Do you want to know more about the P07A0 fault code? Don’t worry! Parts Avatar Canada is here at your service.

The letter “G” in this case might refer to some possible differences. The person might be dealing with a particular circuit/wire or there can be a certain friction element within the transmission. That is the reason why it is very important to have a look at your service manual for particular locations, distinctions, and other such specifications. When the engine control module would detect a slip in the internal "G" friction element inside the transmission, then P07A0 code would start appearing.

What causes this problem with the Transmission Friction Element "G" Slip Detected?

• Tattered friction element
• Malfunctioning engine control module
• ATF might be dirty
• Bumpy tire sizes
• ATF might be low
• The rotational speed/circumference may be unequal
• Defective transmission control module
• There can be some issues related to the wiring
• There can be water damage to module and harness

1. Electronic Control Unit - A faulty Electronic Control Unit can be troublesome. You can always rely on us as we have best auto parts for our customers.
2. Automatic Transmission Fluid - If everything is alright with PCM, then there is surely some defect in Automatic Transmission Fluid. Get it replaced before the situation gets worse.
3. Powertrain Control Module - P07A0 code can display due to some faults in the Powertrain Control Module. So, it is very important to replace the Powertrain Control Module with us at equitable prices.
4. Auto Transmission Control Module - Do you remember when was the last time you got your Auto Transmission Control Module checked up? A defective Auto Transmission Control Module can cause a lot of issues like displaying P07A0 code.
5. Automatic Transmission Filter - Poor Automatic Transmission Filter can cause a lot of difficulties, so why not get it replaced at time?
6. Body Control Module Component - Are there some faults in your Body Control Module Component? Don’t waste time and get them replaced or else P07A0 code can turn up.
7. Engine Control Module - Everything is fine with Auto Transmission Control Module and still P07A0 code triggering? Then you must get your Engine Control Module checked.

There could be countless symptoms which that would accompany with this fault code. Willing to know some common symptoms of OBD Trouble Code P07A0? Your wish is our demand. Have a look at them below:

Common Symptoms

• Grinding shift selection
• Automatic transmission fluid might start ejecting
• Little torque
• Inconsistent shifting
• Dissimilar handling
• Transmission slithering
• Uncommon shift patterns
• Deviant power output

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• Make sure to mend the faulty automatic transmission fluid
• Rehabilitate the defaults in the engine control module
• The malfunctioning automatic transmission control module should be repaired or replaced as per the need
• You must fix the defective electronic control unit
• It is essential to restore the flawed body control module component
• Carefully adjust the faults in the powertrain control module
• Repair or replace the quirky automatic transmission filter

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Module, Friction Elements, Diagnostic Trouble, Transmission Oil, Pcm, Atf Fluid, Ecm Module and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P07A0 code to be stored:

A good starting point is always a technical service bulletin search for your particular vehicle. Advanced diagnostic steps become very vehicle specific and may require the appropriate advanced equipment and knowledge to perform accurately. We include basic steps below but refer to a vehicle year/make/model/powertrain specific repair guide for specific steps for your vehicle.

Here is the Step 1

It is very important to follow the basic maintenance procedures accordingly at this point, as far as the transmission's health goes, start at the fluid. Your ATF (Automatic Transmission fluid) should be fully clean, free of debris and also, proper maintenance schedules have to be followed to avoid more defects. If you don’t remember the last transmission has been serviced (i.e. filter+fluid+gasket), it’s a good idea to perform this before continuing. There might be a bit of debris in your oil that is trapped internally. It may only take a simple service, so make sure you are aware of the last A/T service

Here is the Step 2

When you are attempting to search the connector/harness for this system, then you must find the junction connector. There may be one "master" connector so make sure you are working with the right one by referring to your manual. Make sure that the connector itself is seated properly to guard a fine electrical connection. Now when the connector is situated on the A/T, it may be subject to vibrations due to which the connections might become loose or physically damage them. Not to mention, the possibility of ATF to saturate connectors and wires causing future or present issues.

Here is the Step 3

All of us should be fully aware of the overall condition of your vehicle. Rough tires, worn out suspension parts, inaccurate wheels, all of these can and will cause issues in this system and possibly others as well, so even things out, and you may get rid of this code.

Common Mistakes When Diagnosing The P07A0 Code

• Internal transmission might start failing
• Non-observance of the transmission valve body solenoid
• Diminishing transmission fluid level