P079F OBD Error Code: Problem & Solutions

<<See All OBD Codes

The trouble code P079F can be defined as Transmission Friction Element "F" Slip Detected. Here we are referring to the automatic transmission. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things. Just keep in mind that the initial thing which should be considered is the general health of the automatic transmission as well as automatic transmission fluid.

We learn more by looking for the answer to a question. That’s the reason why we are here to provide you the answers for all your questions. There are lot of friction elements required when a mechanical operation of an automatic transmission is being considered. The same friction materials like the clutch as used by the manual transmissions.

What causes this problem with the Transmission Friction Element "F" Slip Detected?

• Tattered friction element
• There can be unbalanced rotational speed/circumference
• ATF might be dirty
• Flaws in the transmission control module
• Problems related to wiring
• ATF might be low
• Issue of unequal tire sizes
• Imperfect engine control module
• Module or harness might have water damage

1. Electronic Control Unit - The P079F code can also arise due to some issues in Electronic Control Unit. So, it is advised to replace them as soon as possible.
2. Body Control Module Component - Do you remember when was the last time you got your car Body Control Module Component checked up? A damaged Body Control Module Component can cause a lot of issues like displaying P079F code.
3. Automatic Transmission Filter - Automatic Transmission Filter is an important car part which should never be neglected. May be there is some fault in it due to which P079F code may start flashing.
4. Engine Control Module - Is your Engine Control Module damaged or broken? Don’t worry as we have solutions for all your problems.
5. Powertrain Control Module - Defective car Powertrain Control Module can be a major reason why P079F code depicts. So, make sure to replace it online so that you don’t have to face any further issues.
6. Automatic Transmission Fluid - Everything is okay with the Engine Control Module and still OBD code P079F triggering? Then there must be some defects in Automatic Transmission Fluid. Replace them as soon as possible.
7. Auto Transmission Control Module - P079F code flashing? Get your Auto Transmission Control Module inspected from a mechanic.

Willing to know some common symptoms of OBD Trouble Code P079F? Your wish is our demand. Have a look at them below:

Common Symptoms

• Unequal handling
• Uncommon shift patterns
• Grinding shift selection
• Little torque
• Transmission skidding
• Inconsistent shifting
• Automatic transmission fluid might start discharging
• Uncommon power output

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P079F:

• The automatic transmission control module should be repaired or replaced
• Repair or replace the quirky automatic transmission filter
• You must fix the defective electronic control unit
• Make sure to mend the faulty automatic transmission fluid
• Rehabilitate the faults in the engine control module
• It is essential to restore the flawed body control module component
• Carefully adjust the defaults in the powertrain control module

There is no need to be anxious as Parts Avatar – Car Parts Online is here to help you out! We have high grade Module, Friction Elements, Diagnostic Trouble, Transmission Oil, Pcm, Atf Fluid, Ecm Module and a lot more for our precious customers.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

You must perform a technical service bulletin search for your particular vehicle. Advanced diagnostic steps become very vehicle specific and may require the appropriate advanced equipment and knowledge to perform accurately. We include basic steps below but refer to a vehicle year/make/model/powertrain specific repair guide for specific steps for your vehicle. The general maintenance procedures should be carried out on a regular basis, as far as the transmission's health goes, start at the fluid. Your automatic transmission fluid should be fully clean, free of debris and also, proper maintenance schedules have to be followed to avoid more defects. If you don’t remember the last transmission has been serviced, it would be a nice idea to perform this before continuing. There might be a bit of debris in your oil that is trapped internally. It may only take a simple service, so you must remember the last time you got your A/T service done.

You will have to search for a junction connector while you are trying to find the connector/harness for this system. There may be one "master" connector so just make sure that you are working with the right one by referring to your manual. Just be sure that the connector itself is seated properly to ensure a perfect electrical connection. Now when the connector is situated on the A/T, it might be subject to vibrations that could cause connections to come loose or physically damage them. The possibility of ATF to saturate connectors and wires causing future or present issues. The overall condition of your vehicle matters a lot, and that is the reason why we should be fully aware regarding it. Uneven tires, tattered suspension parts, incorrect wheels, all of these can and will cause problems in this system and possibly others as well. So, make sure that you repair or replace the faulty parts and then this trouble code would stop triggering up.

Common Mistakes When Diagnosing The P079F Code

• Decrease in the transmission fluid level
• Failure in the transmission valve body solenoid
• There can be some faults in the internal transmission