P074E OBD Error Code: Problem & Solutions

<<See All OBD Codes

Are you experiencing abnormal vehicle speeds and low engine power? Is your vehicle’s throttle low on response and engine making weird noises? If your answer is YES to all the questions then you might be facing error code P074E. Wondering what does P074E code indicates and how dangerous it can be for your vehicle? To get your answer to all these questions read through the following sections.

Obd error code P074E will be set by your vehicle’s transmission control module also known as the TCM when it detects that the transmission is not able to engage gear 6. Wondering what causes this problem and how to correct it? Well, get answers to all these questions in our subsequent sections.

What causes this problem with the Unable To Engage Gear 6?

• Programming errors with the powertrain control module (rare)
• Malfunctioning transmission control module (TCM)
• Blocked or Clogged transmission hydraulics
• Problems with the automatic transmission fluid such as being incorrect or low
• Problems with the shift solenoid
• Leakage of air in front of the DPF causing the wrong sensor reading

1. Transmission Control Module - if you wish to fix obd error code P074E, you might need top quality transmission control module which you can easily find with us at best possible prices.
2. Automatic Transmission Parts - Need to undergo automatic transmission parts replacement? Worried about the cost? Well, you no longer need to worry about that as we have for you best priced auto transmission parts in stock for you.
3. Diagnostic Tools - If you need one, you can simply find it with us. You can choose from a selection of diagnostic tools on our website and make it easy on yourself when diagnosing problems and creating accurate solutions for your car.
4. Engine Control Module - If you need engine control module to fix this problem, all you need to do is to browse through our website. You can find the most budget friendly ECM’s with us.
5. Diesel Particulate Filter - Clogged or blocked DPF? What are you waiting for? Replace them with a new one today.
6. DPF Parts - If you need any of the DPF parts to fix this obd error code P074E, then all you need to do is to browse through our website to find your trophy parts.
7. Fuel Level Sensor - A damaged fuel level sensors can become a potential cause for many issues related to OBD error code P074E. So why not check and replace the damaged ones?

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P074E code by listing out some major symptoms. They are mentioned below as follows:

Common Symptoms

• Restrictions with regard to vehicle speeds
• Transmission failure in engaging gear 6
• Loud and weird engine noises
• Leaking automatic transmission fluid
• Decline in engine power
• Issues with vehicle speeds such as abnormal speeds
• Discovering red fluid under your vehicle
• Fall in throttle response

Have a look at some ways with which you can correct the P074E code:

• Replacing or repairing the automatic transmission fluid
• Replacing or repairing the automatic transmission filter

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of TCM, Automatic transmission, ECM module, DPF, fuel level sensor and many more. Now all your problems would vanish within no time.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P074E code to be stored:

Step 1: To begin the diagnosis you will need to check for the automatic transmission fluid integrity. Make use of a dipstick to check the automatic transmission fluid level, while its running and while it’s in park. Keep in mind that the procedure to do so will vary greatly from manufacturer to manufacturer. You can definitely make use of the service manual present in your car’s dash.

Step 2: Check for any debris or dirt in the fluid. Before proceeding further, you will need to make sure it is free of all this as a dirty ATF can adversely affect the operation of your transmission. If you discover any leaks and witness low fluid level then we recommend you to check for any signs of oil stains or puddles in your driveway.

Step 3: Next step is to inspect your vehicle’s transmission control modules for any potential issues. Also check for any signs of water intrusion. Also look for any signs of corrosion on housings or connectors.

Step 4: If you do not find any issue with the above stated steps then consider monitoring your gear position and its functionality. While doing so you will be able to tell of the transmission is shifting or not by its drivability. In case it is floored and accelerated too slow then it is probably stuck a high gear - 4, 5, 6 or 7. In case it is accelerating too fast then it is stuck at a lower gear - 1, 2 or 3.

Common Mistakes When Diagnosing the P074E Code

If you want to avoid any misdiagnosis, take care of the following failures

• Failing internal transmission
• Failing TCM
• Low transmission fluid
• Failing transmission solenoid
• Issues with the wiring system