Guide To P074B OBD Error Code Solutions

<<See All OBD Codes

OBD Error Code P074B is a generic trouble code and mostly applies to all the OBD-II vehicles. It might be more prominent in Volkswagen, Audi, Nissan, Mazda, Ford vehicles though not limited only to them. Though this code is generic but the steps to fix and diagnose it may vary from vehicle to vehicle depending upon the manufacturer configurations.

Flashing of the check engine light and fall in overall engine performance will be accompanied with the symptoms of the error code P074B. Your vehicle’s engine control module will set this error code when it detects the inability of the transmission to engage gear 3. What causes this problem? To know that have a look at the section below.

What causes this problem with the Unable To Engage Gear 3?

• Bad diesel particulate filter (DPF)
• Air cleaner element being dirty
• Harnesses to the TCM might be open or shorted
• Bad TCM
• Vacuum leaking leading to overly lean mixture

1. Transmission Control Module - OBD error code P074B demands a transmission control module (TCM) replacement if found faulty. If you wish to get it done at the earliest then you can simply browse through our website to find one for your make and model.
2. Automatic Transmission Parts - Having problems with your automatic transmission parts can really escalate your problem. So, we definitely recommend you to stop thinking and replace your damaged or faulty auto transmission parts today.
3. Engine Control Module - Are you having a faulty ECM or powertrain control module? Worried about the cost? Well, you no longer need to worry about that as we have for you best priced ECM’S in stock.
4. Diagnostic Tools - In order to be the DIY guy, you dream to become, you will need few diagnostic tools and if you need any of the DIY diagnostic tools then you can find them all with us.
5. Diesel Particulate Filter - Since OBD error code P074B might be caused by damaged or blocked DEF, you might need brand new ones to fix the issue.
6. DPF Parts - if you are looking for high end DEF parts for your vehicle, then you can find them all with us.
7. Fuel Level Sensor - Need one? Worried about the cost? Well, why to worry when you have PartsAvatar at your rescue. We have in stock high end and best priced fuel level sensors in stock for you.

It is essential to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P074B here:

Common Symptoms

• Abnormality with the speed of your vehicle
• Transmission being unable to go into gear 3
• Vehicle speed being restricted
• Decline in vehicle’s fuel economy
• Pre-ignition and detonation
• Misfiring engines
• Fall in engine performance at low RPM levels

Here are some ways with the help of which you will be able to correct the OBD Code P074B

• Try cleaning the dirty or clogged DPF
• Try replacing the faulty DPF and related harnesses and parts
• Try repairing or replacing the faulty transmission control module
• Try replacing the damaged fuel level sensor
• Also, do replace the spark plugs and knock sensors if found faulty

There is no need to be anxious as Parts Avatar – Car Parts online is here to help you out! We have high grade TCM, automatic transmission parts, ECM, DPF, fuel level sensor, transmission fluid and a lot more for our precious customers.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P074B code to be stored:

STEP 1

First of all, check for the automatic transmission fluid integrity. Make use of a dipstick to check the automatic transmission fluid level, while its running and while its in park. Keep in mind that the procedure to do so will vary greatly from manufacturer to manufacturer. You can definitely make use of the service manual present in your car’s dash. Next, check for any debris or dirt in the fluid. Before proceeding further, you will need to make sure its is free of all this as a dirty ATF can adversely affect the operation of your transmission.

STEP 2

Now, in case you discover any leaks and witness low fluid level then we recommend you to check for any signs of oil stains or puddles in your driveway.

STEP 3

The next step is to inspect your vehicle’s transmission control modules for any potential issues. Also check for any signs of water intrusion. Also look for any signs of corrosion on housings or connectors.

STEP 4

If you do not find any issue with the above stated steps then consider monitoring your gear position and its functionality. While doing so you will be able to tell of the transmission is shifting or not by its drivability. In case it is floored and accelerated too slow then it is probably stuck a high gear - 4, 5, 6 or 7. In case it is accelerating too fast then it is stuck at a lower gear - 1, 2 or 3.

Common Mistakes When Diagnosing the P074B Code

If you want to avoid any misdiagnosis, take care of the following failures

• Failing internal transmission
• Failing TCM
• Low transmission fluid
• Failing transmission solenoid
• Issues with the wiring system