Guide To P073F OBD Error Code Solutions

<<See All OBD Codes

What causes an OBD error code P073F in your vehicle? Do you know what are its symptoms and causes? If your transmission does not shift properly, then it is said as stuck in the Gear 1 which means unable to engage. The automatic transmission module will match the engine optimum power and torque characteristics to the driver's chosen rate of acceleration. If there is an error, then the P073F error code will be set by powertrain control module.

In the event that you are hunting down this error code, it’s clear that your vehicle isn't going wherever lively. Let’s assume you are stuck in neutral, it is a splendid plan to quit driving the vehicle, until the issue is properly settled. Say, you are stuck in second gear, trying to make up to the interstate speed, you may or may not get it speedier than 60km/h. The engine will be trying its best to work hard to keep up the preferred speed. In such cases, you can see the broken engine. The Engine control module will lighten the Check engine light and the error code will be set.

What causes this problem with the Unable to Engage Gear 1?

• The shift solenoid has problem.
• Mechanical issue in the transmission.
• Transmission hydraulics has blockage.
• The body part of the transmission valve is defective.
• Transmission control module is broken.

1. Automatic Transmission Valve Body Kit - Is this component damaged or broken. Don’t worry. Find the exact part from Parts Avatar at affordable cost.
2. Transmission Control Module - Are you looking to replace this damaged component? Get them from Parts Avatar at the best price.
3. Auto Transmission Shift Solenoid - In order for the system to function normally, the shift solenoids have to be free from damages.
4. Auto Transmission Dipstick - If any part of this component is damaged, then it is good idea to replace them with a new one so as to avoid P073F error code.

Interested to know about the symptoms to old code P073F? If yes, then you have arrived at the right place. We at Parts Avatar have listed out few common symptoms associated with unable to engage Gear 1.

Common Symptoms

• The speed of the vehicle is irregular.
• Power is fewer.
• Unusual noises in the engine.
• The throttle response is less.
• The speed of the vehicle is restricted.
• A leaky automatic transmission fluid.

Have a look at some ways with which you can correct the P073F code:

• Replacing the automatic transmission valve body kit.
• Fixing the transmission control module.
• Replacing the auto transmission shift solenoid.
• Replacing the auto transmission dipstick.

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Auto Transmission Shift Solenoid, PCM, OBD2 scanner, TCM and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this P073F fault code:

• Initially you have to check the integrity of ATF. By using the dipstick check its level while running and when your vehicle is idle. The process varies a little between different manufacturers. However, this information can be easily found with the help of service manual of the vehicle or it will be printed in the dick. Ensure that the fluid is new and free from rubbles. If you don’t remember doing a transmission service, it is always good to check for records and service the transmission accordingly. You will be surprised to know how dirty the ATF can affect the functionality of your vehicle’s transmission. Always check ATF level on flat surface to obtain accurate readings. Ensure that you use manufacturer suggested fluid.
• Do you find any leaky areas? If your fluid is low, then it's probably because of the leak. Check your driveway for any signs of any oil tints or puddles. You may not realize, but this can be your issue. Either way, it's a better idea to address them as well.
• Check for injuries in the transmission control module. If there is damage in the component itself or elsewhere, where it may be subject to the elements, visually check them for any signs of water interruption. This can more likely cause a problem in many possible ways. If you find any signs of corrosion on the housing or the connectors, they are a better indication of the problem.
• If everything seems to be perfectly fine, based on the capability of the OBD 2 scanner, you have to check for the gear position and check for its functionality. If will be easy to let you know, if your transmission is shifting or not by its drivability. Is it floored and keeps accelerating extremely low? Then it could have been stuck at the high gear (4, 5, 6 and 7). You’re able to accelerate it as fast as possible yet the vehicle's speed never goes as high as you expect? Then it’s probably stuck in a low gear (1, 2, 3).

Common Mistakes When Diagnosing the P073F Code

• The internal transmission is damaged.
• The transmission control module is unreliable.
• The body part of the transmission valve is broken-down.
• Issues with wires.