P0629 - OBD Trouble Code

<<See All OBD Codes

Terrorized? Don’t know how to comprehend or treat the Error code P0629? Well, we have got you covered. Fasten your seatbelts to join Parts Avatar on this ride to crack and solve the OBD Error code P0629. The vehicle’s PCM sets the code P029 when there is a problem detected with the “A” control circuit in the fuel pump.

It should be noted that the fuel pump allows and regulates the passage of fuel from the tank to the fuel injectors. If the engine control module (PCM) detects the fuel pump working incorrectly, the PCM ends up setting the Error code P0629. Still not there? Stay tuned for all that we have in store for you.

What causes this problem with the Fuel Pump "A" Control Circuit /High?

• Unsound and broken connectors or shorted or open wirings in the CAN bus harness
• A disconnected or broken ground strap in the control module
• A corroded or broken ground wire in the control module
• A damaged CAN bus

1. Powertrain Control Module - Abbreviated PCM; this is an integral control unit. So, a defective one should be changed immediately.
2. Ignition Switch - A distorted Ignition switch can end up being the chief host inviting the error code P0629. So replacing one can be one of the wisest decisions to avoid a problematic system.
3. Engine Control Module - Often termed as the ‘brain’ of the system, a damaged one should be changed as soon as possible to further avoid complications caused due to an error code P0629. So, what are you thinking? We are just a click away!
4. Intake Fuel Pump - Facing the error code P0629? An inferior quality Intake fuel pump can always be hazardous for the system also it is one of the primal causes behind the occurring of the error code P0629. Tune into Parts Avatar for supreme quality Intake fuel pumps at economical prices.
5. Fuel Pump Relay - Having problems with the fuel pump relay? Don’t you worry, Parts Avatar has it all. A faulty fuel pump relay could end up being the root cause behind the Error code P0629.
6. Fuel Pump - Facing the Error P0629? Well, get that fixed with a new fuel pumps at Parts Avatar available online and delivered right at your doorstep.
7. CAN Bus Harness - Loose or corroded CAN bus harness can always be troublesome. Change yours now in order to combat the error the code P0629.
8. Control Module Ground Strap - Disconnected or damaged control module ground straps should be changed or repaired in no time in order to accurately treat the error code P0629.
9. Control Module Ground Wire - Weary and damage control module ground wire can often be problematic. So, to add some spark to your ride you definitely need the perfect quality control module ground wire offered at Parts Avatar. Isn’t that just the perfect deal?
10. Fuel Pump Harness - A distorted fuel pump harness can end up being the chief host inviting the error code P0629. So, replacing one can be one of the wisest decisions to avoid an erroneous system.

Interested in knowing the symptoms to obd code P0629? If yes, then you have arrived at the right place. We at PartsAvatar have listed out few common symptoms associated with this fuel injector problem

Common Symptoms

• Problems with the fuel pump
• Severed or defective ground wire in the device's control module
• A disconnected ground strap in the control module
• Wirings in the CAN bus corroded, disconnected or defective
• Possibly a fault in the CAN bus
• Unlocked harnesses and wires causing a chafe or broken circuit
• Increased resistance in circuit (e.g. melted/corroded connectors, internal wire corrosion)

After understanding the symptoms and few common causes behind the OBD error code, we are here to help you out in understanding the ways and means to correct the issue. To solve any issue, you need to follow certain steps, and to solve OBD error code P0629, you will need to undergo the following replacements:

• The technician can solve or replace the corroded wirings and damaged connectors. Also, all the other damaged electrical components should be replaced too.

However, if you face any issue then we have stocked a wide range of best priced PCM, ignition switch, ECM, intake fuel pump, fuel pump relay, fuel pump, CAN bus harness, control module ground strap, control module ground wire, fuel pump harness, carter fuel pump, aircraft engine and more to help you out in fixing your car.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

The technician should attentively concentrate on the CAN (controller area network) bus. This is what enables the various microcontrollers in the vehicle to communicate independently of a host computer. These microcontrollers monitor practically all of the vehicle’s electrical functions, and the PCM is the master or the head controller.

It is possible for individual controllers to fail, but not general. So first, the technician should test each and every individual module and make replacements as required. The procedure begins with using an OBD-II scanner, and continues with several (but not necessarily all) of the following:

• Visually investigate the connectors and wirings.
• Replace all the damaged wires, connectors and components.
• Re-examining the system.
• If all appears to be working in the required order, record the codes and freeze frame data and then clearing out the codes.
• Test driving the vehicle to see if the codes come back (if they don’t come back. immediately, the problem could be intermittent and more difficult to diagnose)
• Utilizing a special scanner like Tech II or Auto hex to detect the general area in which the malfunction is occurring.
• Disconnecting and testifying all the CAN bus pins (this could be expensive).
• Checking control module ground circuits with battery ground.
• Detecting ground discrepancies using an auxiliary ground cable.
• Looking for burnt or loose connectors that could be increasing circuit resistance.
• Making use of a digital volt ohmmeter to examine individual controller connector continuity, using a CAN bus wiring diagram and pinout value chart.
• Differentiating and comparing the findings with the manufacturer’s specs, and repairing shorted or open circuits as required.

Common Mistakes When Diagnosing the P0629 Code

A technician at times might fail to diagnose the Error code P0629 at one go. So, it's essential to keep in mind the following mistakes in order to accurately diagnose:

• Repairs can at times prove to be futile if the communication failure is misdiagnosed. This is because the wrong part has been identified, and unnecessarily been replaced.