Error Code P0569: What It Means & What To Do?

<<See All OBD Codes

Before you get to know the symptoms, problems and causes of this code, you have to know what OBD code P0569 is? You will see this error code, if there is an invalid input from the cruise control “Coast” switch. The Cruise Control System is managed by the Body Control Module. The body control module will send request to the powertrain control module as it monitors the driver input to the cruise control system.

The vehicle will run at a fixed speed until it receives a signal from the cruise control system to cancel them. As you turn on the main switch when the vehicle is in running mode, the battery voltage will be applied to the engine control module. The ECM which controls the fuel injection system will help the car to go at a steady speed as preferred. Also, the cruise indicator will light up while you operate the system and then the OBD II code will be set if it is not found as per the factory specification.

What causes this problem with the Cruise Control Coast Signal Malfunction?

• Cruise control switch and the buttons within the switch is either faulty or broken.
• Connectors are not making appropriate and operative electrical connection.
• A short circuit or opening in the wires within the cruise control harness is faulty or repaired.
• Presence of liquid in the cruise control switch assembly.
• ECM fault.
• Cruise control module is damaged.
• BCM fault.
• Malfunction in the system due to overheat.

1. Cruise Control Switch - Check for any short circuit or open circuit in your cruise control switch. If you find so, repair them.
2. Body Control Module - visually inspect the component for any damages or issues. Repair them as desired.
3. Cruise Control System - See if the connectors in the cruise control system is damaged or faulty. If they are damaged, replace them with the right part from Parts Avatar.
4. Engine Control Module - A damaged or faulty engine control module can cause trouble in your system. Fix if there are any damaged parts or issues.
5. Fuel Injection - Fuel injection is responsible to make your car move steadily. If you notice any issues with the fuel injection, repair them immediately.
6. Cruise Control Connectors - A broken or damaged connector can cause trouble to your system which gives rise to the trouble code P0569.
7. Cruise Control Blown fuses - Replacing the blown fuses as specified by the manufacturer of the vehicle is very important. Get them at the best price from Parts Avatar.
8. Cruise Control Straps - Loosely connected or damaged straps have to be replaced or fixed. 

If you are facing OBD error code P0569, then there are significant common symptoms that can be felt or observed. We have worked out a list here to help you out in understanding this problem better.

Common Symptoms

• Constant or no cruise control light in the dash.
• Cruise control is not operable.
• Unable to set the desired speed for the cruise control as it is erratic.
• Certain functions in the cruise control system is inoperative.
• Improper functioning of the commands. 

It is very important to fix the fault code P0569. So here are some ways with which you can correct this issue:

• Replacing the faulty cruise control switch.
• Repairing the short or open circuits in the cruise control buttons.
• Repairing if there are any shorted or open electrical wiring.
• Fixing the problematic connectors of the cruise control system.
• Fix the blown fuses and fix the issues which made the fuse to blow.

To do all this, you will need few high-quality auto parts such as Cruise Control Switch, Body Control Module, cruise control system, Engine Control Module, fuel injection, connectors, blown fuses, straps and so on. From where will you get them? From your local store? Well, why go there when you can order quality parts with us while sitting in the comfort of your home. So, just browse through our website and order your needed parts today.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

• Basic step #1. Check if the cruise control module or switch has any damages. Few problems can be, missing buttons, cola making the button stick to one position, loose buttons which are not properly connected. The cruise function which is controlled by the buttons has to move freely without any contamination or damages. You can also record the irregularities and defects of cruise function.
• Basic step #2 Do you see the light in your instrument cluster if it is activated manually? If no, then check for fuse in the circuit. This information is readily in your vehicle’s service manual. Replace the fuses specified by the manufacturer.
• Basic step #3. Remove few of the dash parts like steering column shroud if you want to access the joints to the cruise control switch. If you want to find the exact wire which caused the fault, then you will need a proper wire joint for your vehicle. Before you execute anything, gather proper service information.
• Basic step #4. Anti-lock brakes have to be in proper working condition and there must be no light in it. ABS use speed sensor, where abnormality can fool the computer with the thought that the vehicle is moving at normal speed and neither slow nor fast.

Common Mistakes When Diagnosing the P0569 Code

• Broken Body control module.
• Broken cruise control master switch.
• Problematic wires.