P0568 - OBD Trouble Code

<<See All OBD Codes

What causes the signal malfunction of cruise control set? How does the error code P0568 occur? Aren’t you eager to know about this information? Keep reading. The body control module controls the cruise control system. The body control module keeps monitoring the driver inputs into the cruise control system and sends that specific request to the engine computer (PCM). If there is an invalid input from the cruise control which is detected by the body control module, then the code P0568 will be set.

The cruise control system will allow the vehicle to run at a particular speed until and unless it receives a signal to cancel this speed. The battery voltage will be applied to the engine control module (ECM), when you turn on the main switch with the vehicle in running mode. When the ECM receives a signal from the control switch when the vehicle is in a state, the fuel injection will be controlled by the ECM so that the car goes at a specific speed as preferred. Also, while operating the system, “CRUISE” indicator lamp will light up in the meter assembly. The ECM will monitor the signal of the cruise control set and the OBD II code will be set when the Cruise Control Set Switch is not to industrial unit specifications.

What causes this problem with the Cruise Control Set Signal Malfunction?

• Defective cruise control switch or damage to the buttons with in the switch.
• There is no proper or effective electrical connection with the connectors.
• Scratches with in the wires of the cruise control harness, or any damages which causes a short, open, resistance, etc.
• Contamination of fluid in the cruise control switch like coffee, soda, juice, etc.
• Faulty ECM.
• A defective cruise control module.
• Issues in the Body Control Module (BCM).
• Malfunction of the overheated parts.

1. Cruise Control Switch - See if there is any contamination of liquid in your switch. If so clean the switch and fix them again.
2. Body Control Module - A repaired or damaged body control module can cause trouble in your system. Repair and fix them immediately.
3. Cruise control system - See if there is any problem in your cruise control system. If there is any trouble, fix them as needed.
4. Engine Control Module - A faulty or defective engine control module can give rise to this error code P0556. Replace the faulty part with the right ones from Parts Avatar.
5. Fuel Injection - Is your fuel injection system damaged? Looking to replace them? You will the right replacement for your model at Parts Avatar with best prices online.
6. Cruise Control Connectors - If the wires of the connectors are damaged or fused, they need to be replaced immediately.
7. Cruise control fuses - If you are looking for the blown fuse as specified by your manufacturer, then you can find them at Parts Avatar.
8. Cruise control Straps - See if the straps of your vehicle is broken or damaged. At times they can also be disconnection. If so, fix them immediately.

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P0568 code by listing out some major symptoms. They are mentioned below as follows:

Common Symptoms

• There is a constant or no cruise control light in the dash.
• A broken cruise controls.
• Impossible to set a preferred speed on the cruise control or it is erratic.
• Certain function(s), within the cruise control system, is not working properly (i.e. Resume, Set, +, -, Coast, Accel).
• Inconsistent functioning of the commands.

Learn the ways with which you can correct this trouble code:

• Replacement of the cruise control on off switch on the dash.
• Replacement of the cruise set switches on the steering wheel.
• Fixing the shorted wiring or changing the steering clock spring if there is a short.

However, if you face any issue then we have stocked a wide range of best priced Cruise Control Switch, Body Control Module, cruise control system, Engine Control Module, fuel injection, connectors, blown fuses, straps and more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P0568 code to be stored:

• Basic Step #1. The first step is to visually inspect the cruise control switch and the module. Sometimes a few buttons may be missing, cola would have made the button stuck in one position, loose buttons and improper electrical connections. Make sure that the buttons which is controlling the cruise functions is smoothly moving and is not contaminated with any dirt or damaged particles. There might be a necessity to record all of the cruise functions like malfunction or any irregularities.
• Basic Step #2. Check if there is cruise control light in the instrument cluster when it is manually activated. If there is no light, then you have to check for fuse in the circuit. You can find this information in the service manual of your model. Replace the blown fuses with the ones specified by the manufacturer.
• Basic Step #3. In order to access the joints to the cruise control module, then you have to remove unwanted dash parts like (steering column shroud, airbag module in steering wheel, etc.). In order to identify the specific wire which has faults, you will need a proper wiring joint for your vehicle. Before you proceed with anything, gather proper service information.
• Basic Step #4. Make sure that your anti-lock brakes (ABS) are in good working condition and the light is not on in the dash. ABS use various sensors like speed sensor, such that if there is a malfunction in the system, the computer can be fooled as the vehicle is either going fast or slow than usual speed.

Common Mistakes When Diagnosing the P0568 Code

• A faulty body control module.
• A fault in the cruise control switch.
• Issue with wires.