Guide To P0567 OBD Error Code Solutions

<<See All OBD Codes

When does the resume signal malfunction? What is OBD Code P0567? What are its symptoms? The body control modules control the cruise control system. The cruise control system is monitored by the body control module which sends its request to the powertrain control module (PCM). The cruise control “Resume” switch code P0567 will be set if the body control module detects an invalid input.

The cruise control system will allow the vehicle to run at a fixed speed unless a signal stopping this fixed speed is received. When the main switch is on while the vehicle is in the running mode, the battery voltage will be applied to the Engine Control Module (ECM). When a signal from the control switch is sent as input to the ECM, the ECM which controls the fuel injection will make the car to go at a stable speed as you desire. Also, you will see light in the cruise indicator lamp while operating the system. You will see the OBD code P0567 in your system if it is not set to factory specifications.

What causes this problem with the Cruise Control Resume Signal Malfunction?

• Cruise control switch is damaged or the buttons within the switch is faulty.
• Connectors are not in proper contact with the electrical connections.
• There can be a short, opening or resistance if the wires in the cruise control harness is damaged or scratched.
• Fluids in the cruise control switch like coffee, soda, juice, etc.
• Faulty ECM.
• Faulty cruise control module.
• Faulty BCM (Body control Module).
• Few parts may malfunction if they are overheated.

1. Cruise Control Switch - If the switch is contaminated with liquid or if the buttons are broken, then the cruise control switch has to be replaced.
2. Body Control Module - Improper functioning of the body control module will enable components to misbehave. Check for fault or damages.
3. Cruise control system - Is there any trouble with this component? Looking to get them replaced. Get them at Parts Avatar as they have every replacement part.
4. Engine Control Module - Even a minor fault in the ECM is always best to be noticed and replaced so that you can avoid further troubles.
5. Fuel Injection - If there are any blocks or particles stuck in the fuel injector, clean them clearly and refix them.
6. Cruise Control Connectors - Broken / faulty or damaged connector needs immediate replacement for the system to function properly.
7. Cruise control fuses - Are your fuses blown out? You can also check for the information in your service manual and get the right component from Parts Avatar.
8. Cruise control Straps - If you are on the lookout for replacing your straps, then Parts Avatar is the best place which offers them online at best prices. 

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P0567 code by mentioning some major symptoms below:

Common Symptoms

• Cruise control light in the dash is not lighting or it is steady.
• Improper functioning of the cruise control.
• Unable to set a preferred speed or the speed is uneven.
• Improper functioning of certain parts within the cruise control system.
• Inconsistent functioning of certain commands.

Have a look at some ways with which you can correct the P0567 code:

• Changing the cruise control switch.
• Changing the cruise control buttons which has short or open circuit.
• Changing or fixing the wire components that are shorted or open.
• Changing the blown fuses.

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of Cruise Control Switch, Body Control Module, cruise control system, Engine Control Module, fuel injection, connectors, blown fuses, straps and a lot more. We are sure that now all your issues would be resolved.

Here are some steps which you should follow in order to diagnose this fault code:

• Basic step #1 First and foremost check the cruise control switches and modules. Buttons may go missing, liquid may cause the button to stick to one position, or they can be improper or poor electrical connections. Be sure that the buttons which controls the cruise functions is damage free without any dust particles. You have to record cruise function’s faults and irregularities.
• Basic step #2. Do you see the cruise control light in the instrument cluster, when it is manually operated? If it is a no, then you have to check the circuit for a fuse. This information is available in the service manual of your vehicle. Also replace the blown-out fuses as specified by the manufacturer.
• Basic step #3. In general, you have to remove the unwanted parts, if you want to access the joints to the cruise control switch. To locate the exact wire involved in the fault, you will certainly be needing a correct wiring harness for your vehicle. Always gather a proper service information before you are about to execute anything too aggressive.
• Basic Step #4. It’s always best to double check if your anti-lock brakes are in good working condition and the light is not on. ABS use speed sensor, if there is any malfunction, it can fool the computer making it think that the vehicle is going in normal speed and not fast or slow.

Common Mistakes When Diagnosing the P0567 Code

• Fault in the Body control module.
• Fault in the cruise control master switch.
• Fault wires.