Feedback

Error Code P001C: What It Means & What To Do?

OBD Code P001C - "A" Camshaft Profile Control Circuit High (Bank 1)

<<See All OBD Codes

Always maintain your car oil, oil solenoid as well as engine control module properly or else the OBD Code P001C could start appearing. This code generally applies to OBD-II vehicles. A lot of vehicles may face this trouble code like Volvo, Ford, Audi, Hyundai etc.

Learn More About OBD Error Code P001C

It is always good to learn a bit more, and that’s why we are here to tell you something more about P001C OBD Code. The overall position of the valves depends upon the camshaft. A shaft with lobes is used in it which is integrated in a specific design as it all depends upon the model of the engine and its manufacturer. Various styles are used like belt and chain to connect the crankshaft and camshaft. If you want a good lobe design, then adjustable lobes can also be used. The main benefit of these is that if we have various engine speeds, then the volumetric efficiency can also increase with various camshaft profile.

 

What causes this problem with the Camshaft Profile Control Circuit?

 

  • Poor oil maintenance
  • The oil may not be correct
  • The oil can be contaminated
  • Some sort of defects in the oil solenoid
  • Internal or mechanical electrical short
  • Issues with ECM (Engine Control Module)
  • Broken wire

Replace/Repair These Parts To Fix OBD Code P001C

  1. Wiring - Broken car wiring can be a major reason why P001C code depicts. So make sure to replace it online so that you don’t have to face any further issues.
  2. Connectors - Are your connectors damaged or broken? Don’t worry as we have solutions for all your problems.
  3. Crankshaft Sensors - Everything is okay with the wiring and still OBD code P001C triggering? Then there must be some defects in crankshaft sensors. Replace them as soon as possible.
  4. Camshaft Sensors - Issues with camshaft sensors can be irritating and its best to replace them. We have a huge variety of camshaft sensors available for our dear customers.
  5. Timing Chain or Belt - Some sort of defects in the timing chain or belt can be a huge reason behind the appearance of P001C code. So, you must get it fixed.
  6. Diagnostic Tool - In order to be that DIY guy, you need to few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so, So why not have a look?

Symptoms Of OBD Error Code P001C

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P001C code by listing some important symptoms like bad running engine, decrease in the power of engine and many more. Have a look at them below:

 

Common Symptoms


Symptoms of a P001C trouble code may include:

 

  • Decrease in fuel economy.
  • General decrease in efficiency.
  • Bad drivability.
  • The car engine light can be ON or service engine soon warning light may start appearing
  • The response of throttle can be unusual.
  • The fuel consumption is Inefficient

How To Correct P001C "A" Camshaft Profile Control Circuit High Bank 1

Here are some ways with the help of which P001C code can be addressed:

 

  • Make sure that your mechanic replaces any faulty or damaged wiring, connectors, or components which they find during their initial inspection.
  • If upon further inspection, the mechanic finds that the camshaft and crankshaft sensors are faulty, then they should immediately replace one or both of them.
  • Ask your mechanic to adjust or replace the timing chain or belt if needed.
  • And, they should also replace or repair the timing belt tensioner if it shows some faults.

 

However, if you face any issues then visit us at PARTSAVATAR CAR PARTS, CANADA. We have great range of best priced Electronic Control Unit, Crankshaft, Powertrain Control Circuit and a many more which would help you to rid of your issues with ease.

Easy Diagnosis Of Engine Error OBD Code P001C

The camshaft profile control circuit for bank 1 of the engine is associated with components, wiring and connectors. You must carefully inspect all of these. Then all the freeze frame data as well as stored trouble codes should be downloaded by the mechanic before he actually clears the codes and starts testing the system. If the code returns, then the voltage should be tested as well as the ground signal with the help of a volt/ohm meter. Check if the voltage or signals are detected or not. If nothing is detected then ask your mechanic to carefully disconnect the PCM as well as other related modules. Then the continuity of the camshaft profile control circuit, camshaft and crankshaft sensor should be tested. Also check if there is any sort of wear in the timing chain and replace it if needed.

 

Common Mistakes When Diagnosing The P001C Code

 

  • Some sort of failure in camshaft variable timing solenoid 
  • The engine oil does not fulfil manufacturer's requirements
  • Failure in variable valve timing actuator
  • Decrease in the level of engine oil 
  • Symptoms common to a P001C trouble code include sluggish engine performance, a lack of power, and in some cases a no-start condition. Some other symptoms include misfires and a rough running engine, especially while accelerating.

Other Diagnostic Codes Related To OBD Code P001C

P001A - "A" Camshaft Profile Control Circuit/Open Bank 1

P001B - "A" Camshaft Profile Control Circuit Low Bank 1

P001D - "A" Camshaft Profile Control Circuit/Open Bank 2

P001E - "A" Camshaft Profile Control Circuit Low Bank 2

P001F - "A" Camshaft Profile Control Circuit High Bank 2