Guide To P001B OBD Error Code Solutions

<<See All OBD Codes

Are you facing some defects in the camshaft position sensor? Do you remember that when the last time was your car oil maintenance was done properly? Did your mechanic tell you that there is some mechanical electrical short? We know that you trapped in this nasty situation. If you are facing all these issues, then the OBD Code P001B would appear.

The position of valves depends upon the camshaft. A shaft with lobes is used in a design based on particular measurement which depends upon the engine model. Various styles like belt and chains are used to connect crankshaft and camshaft. The camshaft profile is mentioned in the code description. The roundness as well as the shape of the lobe is referred here. It is very helpful as various speeds of engine as well as different camshaft profile would be advantageous in raising the volumetric efficiency among other benefits as it all depends upon the demands of the operator.

What causes this problem with the Camshaft Profile Control?

• There can be some defect in 'A' Camshaft Position Sensor Bank 1.
• The harness of 'A' Camshaft Position Sensor Bank 1 may be open or shorted.
• Bad electrical connection in 'A' Camshaft Position Sensor Bank 1 circuit.
• The oil maintenance is not done properly.
• Defects in oil solenoid.
• There can be internal or mechanical electrical short

1. Timing Belt/Chain - Most of the time P001B error code can come if there are some issues with the timing belt/chain. So, the best option would be to replace it with a brand new one.
2. Timing Belt Tensioner - Everything is fine with timing belt/chain and still OBD code P001B triggering? Then definitely there is some issue with timing belt tensioner. Replace it with a new one online.
3. Powertrain Control Module - Power control module is a very important car part. One must take care of it and you can always buy a new one from us at economical prices.
4. Crankshaft Sensor - There can be some defects in the crankshaft sensor due to which P001B code may come on again and again. Make sure to replace it or else you may have to face some major issues.
5. Camshaft Sensor - The harness of 'A' Camshaft Position Sensor Bank 1 may be open or shorted. This can be a reason why OBD Code P001B is appearing.
6. Stuck Valve - Facing some issues with stuck valve? Find top notch stuck valve online from us.
7. Diagnostic Tool - In order to be that DIY guy, you need to few diagnostic tools to get your car problems pointed out easily. Our diagnostic tools collection will come handy to do so, so why not have a look?

For us our customers are everything, and that’s why we will help you to diagnose P001B code by mentioning some important symptoms below:

Common Symptoms

Symptoms of a P001B trouble code may include:

• Diminishing fuel economy.
• Overall decrease in efficiency.
• Bad drivability.
• Engine Light may be ON or Service Engine Soon Warning Light may start appearing
• There might be some uncommon throttle response.
• The fuel consumption would be inefficient

Have a look at some ways with the help of which P001B code can be précised:

• You should always replace the timing belt/chain and tensioner if it is stretched
• The PCM (Powertrain Control Module) should be replaced
• The defective wiring of the camshaft and/or crankshaft sensors should be repaired or replaced
• The crankshaft sensor should be changed
• Make sure to replace the camshaft sensor
• Replace stuck valve

If you still face some hitches, then you can visit at PARTS AVATAR CANADA ONLINE. We have wide range of Camshaft, Control Circuit, Electronic Control Unit, New Solenoid and many more parts which would resolve your issue. Our main motive is to achieve customer satisfaction.

The camshaft profile control circuit used the harness, connectors as well as wires. The first and the foremost thing is to discover them. You must locate a wiring diagram in order to aid in wire identification. You can easily find the diagrams in your car’s specific service manual. Find if there are any signs of damage or wear by carefully checking all the wires and harnesses. You must also inspect the connections. The connectors can easily become loose because of broken tabs as they are consistently subjected to engine vibrations.  You must also check the oil which is being presently used by your engine. Once you find that its level is correct, and then the other step is to check if it is clean or not. If it is dark in color, then the first thing to do is to replace the oil and filter. Always be updated with your oil schedule.

Common Mistakes When Diagnosing The P001B Code

• There might be some failure with the camshaft variable timing solenoid
• The engine oil may not meet the manufacturer's requirements
• Failure with the variable valve timing actuator
• The overall level of the engine oil may be too low