Question 1

Should i be replacing my brake pads when replacing my rotors ?

Accepted Answer

Yes simply put ! , The reason for replacing brake pads when replacing rotors is that your older brake pads made have indentations from the older rotors causing the pads surface not to be leveled there by reducing braking power and allowing debris to enter and causing unwanted squeeling as well as possibly damaging the surface of your new rotor

Question 2

What are coated Rotors ?

Accepted Answer

Coated rotors implies that the rotor is sprayed with a chemical layer that prevents corrosion/rust and with said coating allows the rotor to have an increased lifespan

Question 3

What are vented rotors ?

Accepted Answer

The term vented applies to the brake rotors having a space between its two sides allows for the rotors to cool down quicker in hot temperatures or demanding conditions . Vented rotors are extremly prefereed and opted by the Canadian automotive industry.

Question 4

What is a solid Rotor ?

Accepted Answer

A solid rotor refers to a rotor that is built with a single piece of steel or carbon composite. It is very commons to see this type of rotor installed on the rear axle of many daily driven vehicles.

Question 5

Can i mix and match brake pad and brake rotor manufacturers ?

Accepted Answer

Absolutely when it comes to brakes for a vehicle the most important fact is FITMENT. if it fits it will work according to specifcaition of the parts manufacturer. Ideally try to keep it to the same manufacturer as that combination has been thoroughly tested

Question 6

Once installed do i need to perform a brake bedding procedure ?

Accepted Answer

In short YES ! , by bedding your brake pads you ensure your brake components ease into use and therby increasing there lifespan. Think of it more like a break in period for your new parts.

Question 7

What material is used for making Element 3 brake rotors?

Accepted Answer

These are designed with G3000-qualified material and are coated with Grey Fusion 4.0™ to resist corrosion.

Question 8

Element 3 brake rotors are ideal for?

Accepted Answer

Element 3 brake rotors are ideal for daily drivers.

Question 9

Do I need to buy brake pads for both wheels or do they come in a set?

Accepted Answer

A set of rear brake pads will include pads for both rear wheels meaning you will get two pairs of brake pads.

Question 10

Do these brake pads come with hardware?

Accepted Answer

Brake hardware is available on select products. Read the product description for more information.

Question 11

Do all brake pads come with a wear sensor?

Accepted Answer

Most brake pads come with metal tabs that create a squealing or screeching noise when the brake pads are worn out. Many modern vehicles have electronic brake wear sensors, which need to be purchased separately when replacing brake pads. However, some brands include electronic brake wear sensors. Read the product description for more information.

Rotor de frein à disque arrière by RAYBESTOS - 982045FZN

Product Highlights

Présentation du produit

Information sur le produit

RAYBESTOS

RAYBESTOS's Warranty

Caractéristiques

Véhicule(s) adapté(s)

Référence croisée EO

Foires Aux Questions

Évaluations et avis