Learn All About Bit Socket & Screwdriver Bits

What Is Sockets Bit?

Socket bits are generally a combination of a bit, like a screwdriver bit, and a hex socket. Socket bits hook up with a turning tool like a ratchet within the same manner as a hex socket, employing a sq. drive socket.

What Is Screwdriver Bits?

A screwdriver bit could be a tool for driving screws and one which will be fitted to most drilling power tools. All screws have a head with a contour specified associate applicable screwdriver tip is engaged in it in such how that the applying of comfortable torsion to the screwdriver can cause the screw to rotate.

Are you searching for the different types of bit sockets & screwdriver bits? Then don?t worry! All you have to do is to have a look below and then all your doubts regarding its types would be cleared.

Types Of Bit Sockets

1. Hex - These are the foremost common sort of socket bits. The drive bit is hexagonal sort of a hex key. The hex drive bits will aim size from 1.5mm up to 32mm, though larger specialized sizes are accessible. This sort of socket bits can usually be observed as an in-hex socket.
2. Socket ball hex - These are basically identical as in-hex sockets; however, the tip of the hex key bit is rounded sort of a ball. This feature permits the socket bit to find into the fastener head at angles of up to thirty degrees, permitting access to fastener heads settled in awkward-to-reach areas and confined areas.
3. Phillips - The Phillips was fictional by Henry F. Phillips. This sort of screw head was designed before torque sensing drivers, like torsion wrenches were wide accessible. As such, it's specifically designed to cam out preventing the fastener from damaging the piece of work and instead damages the screwdriver bit, which may additional simply get replaced.
4. Pozidriv - The pozidriv differs from the Phillips head screw in this it's a second, less well-defined cross indented into the pinnacle of the fastener. Not like the Phillips screw and drivers, pozidriv screws and drivers have straight-sided flanks and this, in addition to the second cross indentation, would reduce the chance of camming out.
5. Torx - Torx head socket bits are designed to suit and switch the heads of Torx screws. Torx bits are in the shape of a star with six rounded points. The Torx style permits the socket to transmit bigger torsion from the motive force bit to the pinnacle of the screw. Torx bits have a way lower tendency to cam-out, which would reduce the possibility of miscalculation the motive force bit or removal the screw head.
6. Spline - A spline fastener includes a twelve-pointed recess in its head. The spline style includes a high resistance to camming out, creating its use most typical in applications that need high torsion to be placed on the fastener.
7. Impact - Impact socket bits are accessible with hex, Torx, spline and plenty of alternative drive bits. They're fabricated from identical material as impact sockets (chrome molybdenum). This is often so they'll stand up to the vibration and torsion forces that would be generated by an impression wrench while not shattering.

Types Of Screwdriver Bits

Phillips Screwdriver Bit: This is the foremost common kind of screwdriver bit; chiefly as a result of the drive the foremost standard kind of screw. Created by Henry F. Phillips, the Phillips screw driver was by choice designed to cam-out once the screw stalled, to stop the fastener damaging the work or the top, instead damaging the driver.

Pozidriv Screwdriver Bits: The Pozidrive screwdriver is an enhanced version of the Phillips screw drive with a further four contact points. These points decrease the probability the bit can cam-out, which permits larger torque to be applied.

Slotted Screwdriver Bit: Slotted head screws aren?t quite common any longer, however they used to be the standard kind of screw accessible. Screwdriver tips are still created for them but, and therefore the gauge of screw they drive defines their size.

Torx Screwdriver Bit : Torx bits are formed sort of a 6-sided star and are used on something from cars to consumer electronics. They resist cam-out higher than Phillips or slotted bits, and were specifically designed with this purpose in mind because of the enhancements in torque-limiting automatic screw driving tools. Sizes vary from T1 through to T20.

Tamperproof Torx Screwdriver Bit : Tamperproof Torx Bits are a variant on customary torx bits. Rather than being solid, they need a hole in their centre to accommodate security screws, and to stop the utilization of ordinary torx bits.

Internal Hex Screwdriver Bit : Essentially AN allen key that you just will place in your drill, these hex bits are normally used once collecting DIY furnishings and for locations wherever close obstacles limit allen key access. The quality size for many hex-drive screws is 5mm.

Square Recess Screwdriver Bit : Sq. recess bits (also referred to as Robertson bits) were made-up in 1908 by P.L. Robertson, a Canadian. The top contains a slight taper that makes inserting the bit and keeping the screw on the bit an excellent deal easier.

Nutsetter Screwdriver Bit : Nutsetters are almost like a hex bit, except they work over their corresponding screws (in this case, tek-screws), instead of into them. They are available in 3 main sizes ? 1/4?, 5/16?, and 3/8?.

Drywall Screwdriver Bit : Drywall bits are Phillips screwdriver bits with a metal ring around them. This ring sits slightly below the tip of the Phillips bit and upon screw driving, the ring presses up against the fabric and stops the screw from being driven below the material?s surface.

Torx Screwdriver Bit: Torq bits are almost like phillips bits, however every arm of it?s cross-like form is offset from it?s opposite. it's a tamper-resistant sort of screw drive, and is most often used for aerospace applications.

Tri-Wing Screwdriver Bit : Because the name suggests, Tri-Wing bits have 3 equally spaced slots and are preponderantly used on consumer electronics to discourage home repair. They're accessible in sizes #1 through to #4.

Spanner Screwdriver Bit : Conjointly referred to as ?Snake Eyes,? hand tool Bits work into their individual screws via 2 tiny spherical symmetrical pins. They're security bits, and are available in sizes #4, #6, #8 and #10.

Trilobular Screwdriver Bit : Trilobular Bits are referred to as TP3 Bits, and have become progressively common on consumer electronics, security doors and plenty of different tamper-proof applications.

Types Of Screwdriver Bits

Do you want to know the essential features of bit sockets & screwdriver bits? Then you have arrived at the right place. Have a look below to know the important features of bit sockets & screwdriver bits:

Advantages Sockets Bit

• Cost but 2-piece socket bits
• Bits is replaced once worn or broken
• More bit designs on the market than with one-piece style
• Bit vogue is swapped
• Replacement bits price but whole one-piece sockets

Disadvantages Sockets Bit

• Unusual bit styles are onerous to search out in concert piece socket bits
• Whole socket should get replaced once worn or broken
• Initial purchase price is dearer than one-piece style
• Small sizes are seldom on the market as impact sockets during a 2-piece construction

Purpose Of Bit Sockets

Socket bits are a mix of a touch, like a screwdriver bit, and a hex socket. Socket bits connect with a turning tool like a ratchet within the same manner as a hex socket, employing a sq. drive socket.

Socket bits can typically be cited by the kind of bit they need fitted, as {an example} a socket bit with a hex bit can generally be known as an in-hex socket, whereas ones with Torx bits are known as Torx sockets or Torx bit sockets and ones with pozidriv screwdriver bits are known as pozidriv bit sockets.

Purpose Of Screwdriver Bits

Screwdriver. Screwdriver, tool, typically non-automatic, for turning screws with slotted heads. For screws with one straight diametrical slot cut across the top, commonplace screwdrivers with flat blade tips and in a very form of sizes are utilized.

You won?t have to think a lot while purchasing if you are already using a particular car part brand and are fully satisfied with it. There are a lot of people which trust a specific brand and would go with it once again with a minimum of thought. Here we have the best Bit Sockets & Screwdriver Bits brands to help you out in choosing your favourite one in case you don?t have any. So, what are you waiting for? Have a look below and choose the best brand for your Bit Sockets & Screwdriver Bits.

Do you want to know what are the related parts of the car Bit Sockets & Screwdriver Bits? Say no more! We are here to help you out. Have a look at Bit Sockets & Screwdriver Bits related parts below: -

• Bit Sockets
• Bit Holders
• Bit Sets
• Bit Wrenches
• Locking Tie Tool