Details
Flowmaster introduces their dual 2.50" "pre-bend" tailpipes for 1988-1998 GM C/K1500 pickup trucks. These are universal type parts that are constructed in aluminized steel and do not include any hangers, mounts, tips, etc. They are intended to be used with a single inlet, dual outlet muffler located on the right (passenger) side of the vehicle. The pipes exit out both sides of the vehicle behind the rear tires. These tailpipes are mandrel bent to maximize performance.
Made in the USAProduct Attributes
| Heat Shield Attached | No |
| WARNING CA Proposition 65 | No |
| Position | N/A |
| Exhaust Pipe Bend Type | Assorted |
| Mount Type | Yes |
| System Type | Tailpipe |
| Tubing Diameter | 2.500 in. |
| Title | Flowmaster 15811 Prebent Tailpipe 2.5 in. - Side Exit, 1 Pair - Aluminized Steel |
| Muffler Part Number | Kit Only |
| Exit Position | Dual Side |
| Single or Dual | Dual |
Extended Product Attributes
| NAFTA Preference Criterion Code | B |
| Refurbished Part | N |
| Life Cycle Status Description | Available To Order |
| Life Cycle Status Code | 2 |
| Harmonized Tariff Code (HTS) | 8708925000 |
| SDS Sheet Number | N |
| Warranty Time UOM | MO |
| Maximum Cases per Pallet Layer | 5 |
| National Popularity Code | A |
| Emission Code | 1 |
| Harmonized Tariff Code (Schedule B) | 8708925000 |
| Pallet Layer Maximum | 4 |
| SDR Required Flag | N |
| Country of Origin (Primary) | CN |
| Remanufactured Part | N |
| Warranty Time | 36 |
| Stock Status | S |
| National Popularity Description | Top 60% of Product Group Sales Value (Units x $, Hits, etc.) |
| Taxable | Y |
Information sur le produit
Product's Extended Description
- Tailpipe Set; 2.5 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required;
- """""""Flowmaster introduces their dual 2.50"""""""" """"""""pre-bend"""""""" tailpipes for 1988-1998 GM C/K1500 pickup trucks. These are universal type parts that are constructed in aluminized steel and do not include any hangers, mounts, tips, etc. They are intended to be used with a single inlet, dual outlet muffler located on the right (passenger) side of the vehicle. The pipes exit out both sides of the vehicle behind the rear tires. These tailpipes are manufactured in the USA and are mandrel bent to maximize performance."""""""
- 2.5 in. Dia. Sold In Pairs; Hardware/Hangers Are Required For Installation; Offset Inlet/Center Outlet Mufflers Required
Survoler pour Zoomer
