Essential Things About Rear Bumper Step Pad

Your pickup truck, van, or SUV would turn out to be your best friend when it comes to carrying heavy loads, irrespective of it being your job or for your own personal travel. But loading and unloading cargo can be quite challenging when the height of the vehicle and the slippery surface of the rear bumper. Now this is where having a bumper step pad definitely comes in handy. If you would have this part installed on your ride, then it would be very easy to get on and off the rear side of the vehicle. Also, there would be no fear about slipping because the glossy surface of the bumper will become much safer to step on with the help of a step pad. This component can also be used for customization projects, which would allow you to give your ride a new look without too much effort. And then finally, if you would install a step pad on your vehicle, then it would prolong the life of the bumper as it would act like a protective cover.

When you would be searching for bumper Step pads, then you would find a lot of options available in the market. The most common option would be the premiered Step pad. However, you can also purchase textured, black, beige, gray, and other options to suit your taste.

If you want to repair your Rear Bumper Step Pad all by yourself, then let?s face it that you will need some auto body tools. You can always start by building your own tool chest. Searching for some tools needed to repair your Rear Bumper Step Pad? Don?t Worry! We are here to help you out. Here are some common tools that you will probably end up needing while repairing your Rear Bumper Step Pad

• Socket Wrench
• Putty Knife
• Kitchen Knife
• Pliers
• Nylon Packing Tape
• Spray Paint

Most of the people have a nature to avoid risk and seek safety. That is the reason why they would go with a familiar auto parts brand than a new one. It would prove to be safe and they know what to expect. Have a look at our top brands for rear bumper step pad which would offer safety and at the same time decrease the risk of disappointment.

Do you want to change your rear bumper step pad on your own? Then have a look at the steps of changing the rear bumper step pad below:

Step 1

To start the process, first of all you should cover the blades of the putty knife and kitchen knife with nylon packing tape so that the pain of the bumper is protected.

Step 2

If there is an existing Step pad which you are willing to change, then there would be a need to remove it to proceed with the installation. The putty and kitchen knives should be used to pry it out, starting from one side. Then you should remove its hold-down tabs and lift it upwards. There would be a need to perform an upward and twisting motion to take the tabs out.

Step 3

Now once the old bumper Step pad has been successfully removed, scrub the bumper and make sure that the mounting area is thoroughly cleaned. If you are willing to remedy some damage marks in your bumper, then a spray paint can be used to cover them up.

Step 4

After that you should apply the trim care after washing the bumper to help prevent oxidation that will lead to rusting.

Step 5

After that you should get the new bumper Step pad and snap it in place using the rubber mallet. It should then be secured in position by inspecting if it is installed correctly and do the necessary adjustments as required.