You Should Know This About Your Car Stubby Trail Mirror

If you?re an avid off-roader or trail enthusiast that owns a jeep, you must be aware that the most fun you can have is when you remove the doors and feel more connected to the land you are exploring, one drawback, however, is that the side view mirror goes with the doors. This is when a Stubby Trail Mirror comes in handy. They come with a mirror and bracket for installation and are easily attached and removed when not required.

They go directly on the car pillar and offer a replacement to the standard side-view mirrors with increased ruggedness.

Taking your doors off your Jeep shouldn?t mean horrible visibility, having Stubby Trail Mirrors mean you?ll be driving safe. Each mirror arm is reduced by three inches, allowing the mirror to hug more tightly to the body of the vehicle. Available with both round and rectangular mirror heads, Rugged Ridge Stubby Mirrors textured black powder coat looks great on any paint colour and installs easily with the included mounting hardware. When it?s time to put the doors back on, these mirrors can be removed quickly with a few turns of the convenient thumbscrew. A convenient bolt-on mirror solution for when you want to leave the doors at home ? also great with tube or safari doors.

These mirrors are up against nature itself when you are in the wild and any hard objects like stone, wood, etc. can damage the heads and shatter the glass. Since these are meant to go good with wild off-roading vehicles they can still be a member that cannot withstand the damages faced from the extreme situations and can break on direct impact. Due to their easy bolt-on procedure, they are an easy way to replace when broken and you should consider keeping a spare set or stubby trail mirrors when you are in the wild.

You may face rattling of the structure or the glass in the mirror due to loose bolts or failing mounting brackets. The glass can be visibly shattered which can imply you need to replace them.

One of the more handy and easy techniques for a replacement is followed by the stubby trail mirrors and all you will need to replace them is:

• Screwdrivers
• Ratchet
• Bit Sockets Set
• Socket Set

You won?t have to think a lot while purchasing if you are already using a particular car part brand and are fully satisfied with it. There are a lot of people which trust a specific brand and would go with it once again with a minimum of thought. Here we have the best Stubby Trail Mirrors brands to help you out in choosing your favourite one in case you don?t have any. So what are you waiting for? Have a look below and choose the best brand for your Stubby Trail Mirrors.

Rugger Ridge Stubby Trail Mirror

If you want to learn more about the other mirrors in your car or possibly replace them then you can get all the information right here:

• Side View Mirror Glass
• Side-View Mirror Covers
• Towing Mirror
• Car Mirror Kit
• Interior Mirror
• Rear View Mirror
• Car Mirrors

The stubby trail mirrors are specifically designed with trail-ready performance in mind and so they offer easy bolt-on and -off experience along with ruggedness and flexibility of mounting without having doors present. If stowed away properly when not in use mounted correctly these mirrors will last a long time unless acted upon by the force from a trail obstacle. They are an inexpensive way to maintain proper visibility with your jeep?s doors off and cost about 50 to 100 $.

The Stubby Trail Mirrors are mounted on the windshield frame or pillar ahead of the factory mirrors which are mounted on the doors. Follow this guide for a simple installation process:

• Start by removing the two upper torx bolts on the windshield pillar using a ratchet and the appropriate torx bit.
• Place the mounting bracket and install it using the given hardware in the holes where the torx bolts were removed. Tighten it down with a ratchet and the appropriate socket.
• Now place the arm along with the bushing and slide it in the mounting bracket and tighten the thumbscrew to a snug fit.
• Place the mirror head on the arm and secure it using the hardware.
• Adjust the location of the mirror for best viewing and then tighten the three screws at the back of the mirror head to retain that position.
• Repeat the steps for the opposite side of the vehicle and the installation is complete.