Learn All About Car Grille Bracket & Retainer

The car's grille is an elegant part of d�cor in every car and helps improve the styling of the entire front section, but if they were to be some visible bolts or clips that were holding it on from the front of the bumper, it would completely spoil the look of the grille. To prevent this, the auto manufacturers had to come up with a way of securing these in a way that could avoid ugly hardware from showing which is when Grille Brackets and Retainers came to good use. The Grille Bracket and Retainers help secure the grille in place from inside the front bumper cover and can be bolted on using a few clips.

It is found right behind the grille(s) and can be accessed after removing the bumper cover.

They provide a more elegant look by hiding hardware used to hold down the grille in place and securely grip the grille to the bumper. Unlike the early days when the cars used to have a lot of bolts and nuts showing directly on all trim pieces and covers, the modern cars are designed and engineered in a way all the hardware is neatly tucked away behind and under the covers and trim pieces, thereby improving the overall look of the cars. The Grille Bracket and Retainer do just that by securing the grille in place while avoiding the use of many bolts and instead opting for clips wherever necessary. These parts can only be seen once the bumper is completely removed.

Grille is one of the most susceptible parts to damage during driving, as it can easily be struck by a number of oncoming objects and this will directly affect the retainer and bracket as they may break due to the impact. Direct bumper impact can break the grille as it is one of the first elements that come in contact and the force will be transferred to the bracket and retainer rendering it broken, hence it is common to have a broken grille bracket after a head-on collision or any accident that involves the front end.

As the bracket and retainer hold the grille in pace any breakage in them will directly show on the grille as it may seem out of place or can vibrate during movement of the vehicle. A simple inspection of the grille will be enough to determine any problems on the bracket and retainer.

To access and replace the Grille Bracket and Retainer you will require the following tools:

• Ratchet
• Socket Set
• Gloves
• Screwdriver
• Clip Tools

If customers trust a brand, then it would make them loyal, and if they are loyal, then they will surely buy more. We are well aware that customers want comfort, cheerfulness as well as satisfaction in their lives and that?s the reason why we offer top quality auto parts brands to our customers. We make sure to provide a positive experience to our consumers from the brands which we are offering so that they can form an opinion that a particular auto parts brand is trustworthy and would give them peace of mind while they are purchasing it for their car. Here we have listed out some top brands for Grille Bracket & Retainer.

There are many parts associated with the Front Bumper and Grille Bracket & Retainer and fir a proper restoration job make sure to also look for:

• Car Grille
• Grille Moulding
• Front Bumper Cover
• Front Bumper Insert
• Front Bumper Brackets
• Front Bumper Retainer
• Front Bumper Rebar
• Front Bumper Impact Absorber
• License Plate Bracket
• Front Bumper Valance
• Car Fender
• Headlight
• Fog light
• Fog light Cover

Making sure the grille fits the contours of the bumper properly is one way of assessing whether the bracket and retainer are securing the grille correctly. They are usually specifically designed for every vehicle make and some may have a mounting panel whereas some may have a bracket. The cost for a bracket or panel will vary from about 50 to 200$.

Replacing the Grille Bracket & retainer may be a little complex but the right tools and this guide can make it a bit easier so follow along these steps :

• To access the bracket or mounting panel for the grille, first, you must remove the bumper cover.
• Pop the hood and using a clip tool or straight head screwdriver remove the clips holding down the upper shield above the grille and the fender liner in the wheel well.
• Repeat the process for the under shield or in some cars - the valance if the bumper is attached via the shield. If there are other visible bolts or clips holding it down then only undo them.
• Now using a ratchet and socket undo the bolts holding the bumper to the frame and the bumper is ready to come off. The bumper is popped from the bracket under the fender.
• Make sure to remove all electrical connections on the bumper like the fog light connections.
• The grille bracket or retainer can now be accessed from the back of the bumper and can be removed from the bumper by undoing the bolts that secure it.
• Reinstall the new bracket or retainer following the same procedure but in reverse order.

The process for removal and refitting will differ between different car makes and models and this guide provides an approximate as to what steps may be involved while installation or removal. Make sure to refer to your owner's manual for further clarification.