Learn All About Car Fender Moulding

The fenders in every car play an important and crucial function of protecting the engine bay while also heavily contributing to the entire image of the vehicle. The fenders are prone to a lot of damage which it sustains on a daily basis. With parking lot malfunctions to careless drivers in traffic that damage the fenders, there are many occasions where you will find your fenders tattered and harmed. Hence to protect them a simple and elegant trim is designed called Fender Mouldings which wrap around the fender and wheel well and help protect the fender by taking the damage intended for the fenders. 

They attach on the car fender above the wheel well. There are usually similar pieces for the rear quarter-panel above the rear wheels.

Fender mouldings can be classified into two broad sections based on their construction:

• Fender Trim: These are subtler mouldings that wrap around the wheel well.
• Fender Flares: These are bigger and more protective and provide a wide-body appearance.

Fender mouldings are essential to any truck or car as they serve many practical purposes without having any disadvantages. Firstly they enhance the look of the entire vehicle by adding to the styling. They are primarily used for protection enhancement as fenders are prone to a lot of damage on a daily basis and fender mouldings can sustain a lot of the damage thereby reducing fender wear and increasing the value of the car in the long run. They can be painted to the vehicle?s colour or customized to the user preference which can further increase styling.

Fender mouldings are essential as they intend to protect the other important bodywork of the car from rocks and debris thrown by tires which can severely damage the side of the vehicle. This affects the fender mouldings and eventually can deteriorate overtime. These are stuck on in most cases, using tape which expires after prolonged use and causes the moulding to fall off the body or fender. They may allow significant dirt and grime accumulation in crevices and cracks which can eventually corrode the metal panels underneath.

With prolonged use, fender mouldings start to show signs of deterioration after the elements have taken their toll on these plastic pieces. They look worn out and tattered and the most obvious sign may be that they start hanging off the bodywork due to lack of adhesion. They can crack on impacts. These are mainly used for protection purposes and hence replacing them would not only increase protection but also enhance the overall styling of the vehicle.

Make sure to utilize the following tools while replacing or installing the fender mouldings on your vehicle to avoid scratching the precious paintwork

• Plastic Scraper
• Gloves
• Screwdriver
• Ratchet
• Socket Set

When it comes to vehicle owners choice, the brands really matter a lot. You might pay a premium for a specific car part brand, over time, as it has created a perception of quality, stability as well as trust. There are some leading car parts brands which are more than just products or services as they give rise to memories and emotions related with the quality. So have a look at some top brands for Fender Mouldings.

There are many upgrades available for trucks that make them more durable, increase protection and also add to the aesthetics. Get the best Armour and Protection parts for your truck:

• Bumper Guard
• Fender Flares
• Skid Plate
• Off-Road Doors
• Vehicle Corner Guards
• Off-Road Vent Deflector
• Car Body Protection
• Front Bumper Moulding
• Rear Bumper Moulding
• Tailgate Mouldings
• Vehicle Fender

Fender Mouldings are a necessary addition to any truck or SUV as they greatly enhance the overall look of the vehicle making it look tougher and more aggressive while also protecting the bodywork. There is not much in terms of maintenance that can be done on such elements but cleaning them regularly will surely prolong their life. The Fender mouldings come in a variety of different styles and sizes to match anyone's preference. The price range varies from around 200-700 dollars.

Fender mouldings installation will take a very short period and will last long enough to prove its worth. Follow along these steps for an easy removal and refit procedure:

• Use a plastic scraper and insert it between the fender and the moulding and gently scrape off the moulding from the tape underneath. This will require a little persistence but should come right off. Alternatively, you can use a heat gun or a hairdryer to heat the surface of the moulding which will warm up the glue and help reduce the effort required to remove the moulding.
• Once the moulding is off and if the tape is still adhered to the surface of the vehicle, use a plastic scraper to remove all the gunk before installing the new moulding.
• To apply the new moulding, stick 3M double-sided tape on the moulding and paste it in line with the fender and wheel well.
• Apply a little pressure to make sure the adhesion is strong.