Everything You Need To Know About Brake Lines
What Is Brake Line?
Hydraulic
pressure would be generated in the master brake cylinder when the driver would
press the brake pedal. Then a braking force would be produced from this and the
hydraulic pressure should be transmitted to the wheel brakes with the help of the
brake fluid. In the motor automobiles, this would happen via the brake lines.
If
there would be some flaws in the brake lines, then the moisture can get into
the brake system from outside. This can give rise to the vapour locks forming
in the brake fluid and can also damage the braking effect or sometimes it might
also cause a full brake failure. That is the reason why the brake pipes and
brake hoses should be inspected on a regular basis.
We
are all aware that the brake is a safety-relevant system in the automobile,
that’s why its inspections as well as repair work on brake pipes d brake hoses
as on all other parts of the brake system should be carried out by a trained
mechanic.
So,
make sure to check them during every inspection and should be replaced
immediately with if there are some flaws in it. In a similar manner, if the
driver would observe a decline in braking effect, then it is advisable to
inspect the brake pipes and brake hoses.
Features of Brake Line
Here
are some features of the
brake lines:
- It
should be copper-fused and terne-coated
- There
should be alloy coating: 4 parts lead to 1-part tin
- It
should have vibration-resisting steel outer wall
- The
steel walls should be fused
- There
should be stainless steel braided brake line
- It
should be PVC coated to guard against wear as well as tear
- Presence
of OEM designs to provide true OE replacement
- Lines
should utilize OEM style grommets for precise fitment
- Stainless
Steel fittings must resist corrosion in rough conditions
Symptoms of a Bad or Failing Brake Line
Generally,
a defective brake master cylinder might start producing the following symptoms
to alert the driver that there is a requirement of service. Have a look at them
below:
- Abnormal
brake pedal behavior - The first symptom which is generally
related to a faulty brake master cylinder is weird behavior of the brake pedal.
It is the master cylinder which would generate all of the pressure for the car braking system
parts. If it would develop any sort of problems sealing or
distributing pressure, then it might be felt in the pedal. With the passage of
time as well as constant use, the seals which are inside of the cylinder can
wear out and can give rise to the internal leaks. A defective brake master
cylinder might result in a pedal that would feel mushy, spongy, or that would
slowly sink to the floor when it has been depressed.
- Contaminated
brake fluid - One another symptom of a faulty master
cylinder is that the brake fluid might be contaminated. Rubber seals are used
by the brake master cylinders which can break down and then wear out with the
passage of time. When this is done, it might contaminate the brake fluid and
then it would be turned into dark brown or black color. The brake master
cylinder whose seals have been work out would also not be able to hold brake
pressure in an effective manner and it would give rise to sloppy pedal or one
that would slowly sink into the floor.
- Check
Engine Light comes on - One major symptom which is noticed in the
latest automobiles is the flashing up of the check engine light. There are
brake fluid level and pressure sensors installed in the master cylinder in the
braking systems of the latest vehicles. The main purpose of these sensors is to
find any issue with the automobile’s brake fluid pressure, which is produced by
the master cylinder. If it is detected that there is a drop in the pressure,
then it can due to some issues in the master cylinder. The brake master
cylinder is the heart of the braking system and at the same time plays an
important role in the handling and safety characteristics of the vehicle. If
the brake master cylinder in an automobile would not be in perfect condition, then
that car would be very dangerous to drive. That is the reason why if you find
out that there are some defects in your brake master cylinder, then you must
get your car brake system
parts checked from an experienced technician.
Tools Needed for Brake Line
It is said that a
workman is only as good as his tools, and it is definitely true when it comes
to the car bodywork. It is vital to have the right tools to repair your Brake
line or else a straightforward job would turn into constant headaches. So
that’s why we have listed out some invaluable tools below which you will need
while repairing your Brake Line.
- Aroll of
3/16-inch brake line
- A
brake flaring kit
- A brake
cutting tool
- A
pipe bending tool
- Appropriate
fittings
- Flare nut
wrench
- A
deburring tool
Top Brands for Brake Line
You won’t have to think a lot while purchasing if you are already using a particular car part brand and are fully satisfied with it. There are a lot of people which trust a specific brand and would go with it once again with a minimum of thought. Here we have the best Brake Line brands to help you out in choosing your favorite one in case you don’t have any. So, what are you waiting for? Have a look below and choose the best brand for your Brake Line.
Related Parts Brake Line Work
The brighter you are,
the more you have to learn! That’s why we are here to provide you more
knowledge about the related parts of the car Brake Line. They are mentioned
below as follows: -
- Brake Block
- Wheel
- Triple Valve
- Exhaust
- Brake Cylinder
- Angle Cocks
- Train Line
- Compressor
- Main Reservoir
- Drive Brake Valve
Brake Line Replacement Cost
If you are looking for
Brake Line Replacement Cost”, Brake Line Replacement Labor Cost”, “Average Cost
of Brake Line Swap” or “How Much Does It Cost to Replace A Car Brake Line, then
keep on reading further! If you are seeing blown Brake line signs from your vehicle,
then it means that a repair bill is coming. More than other failures on a car,
there is nothing that is like a faulty Brake Line. Now if your car Brake Line
goes bad, then it would cause a lot of issues in the functioning of your car
and it would turn into an abandoned home. Don’t worry and just think about the
happiness when an empty shell would become whole again and much better than it
was earlier through quality Brake Line replacement. Keep in mind that the Brake
line replacement cost would depend upon the type of automobile, brand, as well
as various other factors. If you want to substitute your brake line, then it
would generally range between $151 to $240. Talking about the work expenses,
they would range between $104.98 to $202.96 and the parts would be valued
somewhere in the range of $36.96 to $59.76.
How to Change Brake Line?
Here are the steps to change the
brake line:
Step 1
If you want to restore
your brake line, then you must consider upgrading the line to a copper-nickel
line which would be more resistant to rust as well as corrosion.
Step 2
If there are some panels
in the way, then they should be removed. It is essential to loosen the nuts
before you start jacking up the car if the car wheel has to be removed.
Step 3
A line wrench should be
used on these fittings. Just keep your rags ready so that you can clean up the
spilled fluid.
Step 4
Now if it would run out
of the fluid, then there would be a requirement to bleed the entire system as
opposed to just one or two wheels. You can always make your own plug with a
short section of tubing as well as extra fitting.
Step 5
One end of the tube
should be pinched flat with the pliers and it should be folded over itself to
make a seal. The fitting should be put on and then carefully flare the other
end. Now this should be screwed onto any piece in your brake line to stop the leakage
of fluid.
Step 6
There might be a few
bends so utilize some string to get the length and then the string should be
measured.
Step 7
This should be started
by hand so you don’t cross thread anything and then your line wrench should be
used to tighten it.
Step 8
These mounts would keep
the line from bending as well as flexing so all of them should be utilized.