P3442 OBD Error Code: Problem & Solutions

<<See All OBD Codes

Vehicle set to OBD Error code P3442? Engine misfires and check engine light flashing? If YES, then your vehicle is having problems basically due cylinder 6 deactivation/intake valve control circuit performance. It is a generic OBD-II code and applies to all OBD-II equipped vehicles. If you wish to learn more about this error code, go ahead and give a look at our subsequent sections

If OBD error code P3442 is a completely alien word and you are worried about what to do, then you no longer need to stress out. We are here to help you out with all your queries related to this code. Your vehicle’s PCM will set the error code when it detects that the cylinder 6 deactivation control circuit is not working well, or in other words it senses that the intake valve cylinder 6 is not performing as commanded. To know more about this error code, take a look at the subsequent sections.

What causes this problem with the Cylinder 6 Deactivation/Intake Valve Control Circuit Performance?

• Malfunctioning cylinder deactivation solenoid
• Low level of engine oil
• Blocked oil passages
• Corroded or loose wires and connectors
• Malfunctioning engine control module
• Low oil pressure
• Open or shorted deactivation solenoid harnesses
• Faulty electrical connections

1. Powertrain Control Module - A faulty powertrain control module (in rare cases) can lead to various problems. Thus you must check and replace it, if required to get rid of this error code P3442.
2. Engine Control Module - Engine Control Module of your car is also known as the car’s brain. It is extremely essential to keep your vehicle’s ECM in good shape to avoid any sort of performance issues with your car. If you need one to get rid of this OBD error code P3442 then you can easily find one with us and that too at the most economical prices.
3. Engine Oil - Changing your contaminated engine oil might help you to solve your problem, considering it can become one of the potential causes.
4. Variable Valve Timing Solenoid - There is a possibility that if you are facing OBD error code P3442 your variable valve timing solenoid is damaged and is demanding for a quick change. So what are you waiting for? Buy a new one with us now.
5. Intake Valve - Do not take chances with your vehicle’s engine health if you have a faulty intake valve in your vehicle as they are the ones that are responsible for controlling the amount of working fluid entering the cylinder of an engine. So, if you have a faulty one installed, don’t delay and get a new one today at PartsAvatar at best possible prices.
6. Oil Filter - Faulty oil filters can be really hazardous to your vehicle’s engine health. A bad one can result in contamination and dirt entering your engine. So, don’t think twice and replace the faulty one today.

Willing to know some common symptoms of OBD Code P3442? Your wish is our demand. Have a look at them below:

Common Symptoms

• Misfiring engines
• Rising fuel consumption
• Steep decline in fuel economy
• Flashing of service soon and check engine light

We have listed out so ways which would help you to correct the occurrence of OBD Code P3442. They are mentioned here as follows:

• Begin correcting this error code by replacing or repairing the deactivation solenoid
• The next step is to clean off all the corrosion from the connectors
• Repair or replace the faulty oil filters
• Make sure that the engine oil is of right specifications and filled upto right level
• Make sure to clean the blocked oil passages
• Repair the faulty car’s ecm

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of Ecm, Pcm, Intake Valve, Exhaust Valve, Variable Valve Timing Solenoid, Engine Oil and many more. Now all your problems would vanish within no time.

If you want to easily diagnose this fault code, then all you have to do is to follow the steps which are mentioned below:

Check the engine oil and check if it is serviced up to the needed level. Once this is done, then the next step is to look for all the related components and parts with the cylinder 6 exhaust valve control circuit. Once located, check for any physical damage through an in depth visual inspection. Check the wiring and connectors for any bare wires, burn spots, scraped etc. After all of this contact a technical to check for the configurations and see if every incorporated component within the cylinder 6 exhaust valve control circuit is in good shape.

Advanced Steps - These steps will be vehicle specific and will need a few technical equipment to ensure the safety and accuracy. You will need a digital multimeter and technical references. Here the oil pressure gauge will help you in your troubleshooting process.

Voltage Checks - Also the required voltage will depend upon the specific vehicles and the circuit configurations. In case you diagnose the lack of power source or ground, then you might require continuity tests to check the wiring integrity, connectors integrity and other components. Also perform the continuity tests with the power removed. No continuity will be an indication of faulty wiring that is open, shorted or corroded and must be repaired or replaced.

Common Mistakes When Diagnosing the P3442 Code

Beware of the following misdiagnoses

• Low engine oil level
• Faulty powertrain control module
• Faulty vvt solenoid
• Issues with the system wirings