Error Code P3441: What It Means & What To Do?

<<See All OBD Codes

OBD error code P3441 troubling you? Can’t understand what it means and how it relates to your vehicle’s fall in engine performance? Well, error code P3441 is concerned with cylinder 6 deactivation/intake valve control circuit/open issue. It is a generic error code and applies to all OBD-II vehicles. To know more about this error code, have a look at the sections below.

OBD error code P3441 indicates problems with the cylinder 6 deactivation intake valve control circuit. The PCM, also known as the powertrain control module is responsible for monitoring the intake valve for cylinder 6. It will set this error code when it faces issues with turning on or off.

This issue of error code P3441 can be caused by blocked oil passage or low oil levels. To know more about a few of it’s common causes, take a look at the sections below.

What causes this problem with the Cylinder 6 Deactivation/Intake Valve Control Circuit/Open?

• Malfunctioning cylinder deactivation solenoid
• Blocked or restricted oil passages
• Less than needed oil pressure
• Corroded or loose wires and connectors
• Low level of engine oil
• Malfunctioning engine control module

1. Engine Control Module - Engine control module of your vehicle is your vehicle’s engine computer. If it happens to be damaged or corroded then it can lead to creating a short within the ECM, or corrosion can enter the ECM and then move to the wiring harness. This can happen even when being exposed to a wide range of elements when the car is in certain environments. If you are looking for Engine Control Module to fix this error code P3441 then have a look at our collection. You will easily find one for your vehicle make & model.
2. Exhaust Valve - OBD error code P3441 flashing? It's time to replace those damaged exhaust pressure control valves now. Buy new ones with us today.
3. Powertrain Control Module - Error code P3441 flashing? Yes? Then you must check for PCM error which might be due to circuit faults that might require complete replacement and reprogramming. Replace it now!
4. Valve Timing Solenoid - If you are facing obd error code P3441, then you will most probably need to fix and replace your valve timing solenoid at the earliest. Wondering where to find them? Well, nowhere else than PartsAvatar.
5. Engine Oil - Considering that P3441 error can be caused if you use incorrect or contaminated oil, changing it to a new one might solve your problem. With us you can find all specifications and types of engine oil

It is vital to know the symptoms of an issue as only then you would be able to solve the problem. So that’s why we have listed out some major symptoms of OBD Code P3441 here:

Common Symptoms

• Falling engine performance
• Engine misfires
• Flashing of service engine soon light
• Fall in vehicle’s fuel efficiency
• Illumination of the check engine light (CEL)

Want to correct the Trouble Code P3441? Read these points mentioned below:

• Firstly replace or repair the VVT solenoid
• Secondly, get all that corrosion off the connectors
• Thirdly, repair or replace those faulty wires
• After that, the next step is to get rid off all the blocked oil passages
• Repair or replace the faulty engine control module 

Parts Avatar Canada is here to solve all your issues related to car parts. We have stocked a wide range of best priced Engine control module, Pcm, Exhaust valve, Engine misfire, Oil pressure gauge and a lot more to help you out in fixing your car.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P3441 code to be stored:

• Start by researching the technical service bulletins specific to your vehicle make and model.
• Next step is to the engine oil and check if it is serviced up to the needed level.
  
• Once this is done, then the next step is to look for all the related components and parts with the cylinder 6 exhaust valve control circuit.
  
• Once located, check for any physical damage through an in depth visual inspection. Check the wiring and connectors for any bare wires, burn spots, scraped etc.
  
• After all of this contact a technical to check for the configurations and see if every incorporated component within the cylinder 6 exhaust valve control circuit is in good shape.

Advanced Steps - These steps will be vehicle specific and will need few technical equipment to ensure the safety and accuracy.

You will need a digital multimeter and technical references. Here the oil pressure gauge will help you in your troubleshooting process. 

Voltage Checks - Also the required voltage will depend upon the specific vehicles and the circuit configurations.In case you diagnose the lack of power source or ground, then you might require continuity tests to check the wiring integrity, connectors integrity and other components.Also perform the continuity tests with the power removed.No continuity will be an indication of faulty wiring that is open, shorted or corroded and must be repaired or replaced.

Common Mistakes When Diagnosing the P3441 Code

Beware of the following misdiagnosis

• Low engine oil level
• Faulty powertrain control module
• Faulty vvt solenoid