P2A05 - OBD Trouble Code

 <<See All OBD Codes

Do you want to know more about P2A05 error code? Then keep reading further. Less engine performance is called O2 sensor circuit range/performance bank 2 sensor 3. Calculating the oxygen content is the main aim of the oxygen sensor. This is usually done when the exhaust gas leaves the combustion process of the engine. This data might be critical to PCM’s ability so as to conserve the efficient fuel economy. If the failure of the sensor or the information received from it is found by the PCM, the error will be set.

After the three-way catalyst manifold, the heated oxygen sensor will carefully look after the oxygen level in the exhaust gas on each bank. The air-fuel ratio must be preserved near the ideal stoichiometric ratio, for the catalyst reaction to be optimum. In the vicinity of the stoichiometric ratio, the HO2S output voltage will alter suddenly. The ECM will modify the fuel injection time so that the air-fuel ratio is almost stoichiometric. A voltage between 0.1 and 0.9 V will be initiated by the HO2S in response to the oxygen in the exhaust gas. The increase in oxygen in the exhaust gas will cause the air-fuel ratio to be lean and it gets interpreted by the ECM when the voltage of the HO2S goes down to 0.45V. The decrease in oxygen in the exhaust gas will cause the air-fuel ratio be rich when the voltage of the HO2S voltage goes above 0.45V

What causes this problem with the O2 Sensor Circuit Range/Performance Bank 2 Sensor 3?

• Defective oxygen sensor 2 bank 3.
• Heated oxygen sensor 2 bank 3 harness might have an opening or short circuit.
• Heated oxygen sensor 2 bank 3 circuits might have a weak electrical connection.
• Fuel pressure is not correct.
• Damaged fuel injectors.
• Intake air leaks might be defective.
• Leakage from the exhaust gas.

1. Oxygen Sensor - Very poor gas mileage is a sign of faulty or defective oxygen sensors. Replace it quickly to avoid the P2A05 error code.
2. Engine Control Module - Is the performance of the engine very poor? Does your engine keep stalling very often? Then the ECM might be faulty which needs replacement as soon as possible.
3. Powertrain Control Module - The PCM regulates important functions of the vehicle as well as it has a direct impact on how well your vehicle performs. Fixing your faulty powertrain control module (PCM) will help your engine to run smoothly.
4. Fuel Injector - Increased fuel consumption can cause of the malfunctioning of the fuel injector. It is best to change or fix it quickly.
5. Exhaust System - Do you hear strange noises from the engine? Then it is a sign that the exhaust system is malfunctioning which needs a very quick replacement.
6. Air Fuel Ratio Sensor –Does your engine hesitate to start? Is there a drop in power? Then the air-fuel ratio sensor can be faulty which needs replacement.
7. Battery - One of the common symptoms for a damaged battery is the illumination of the check engine light. Fix it as soon as possible.

We at Parts Avatar Canada care for our customers, and that’s why we will help you to diagnose P2A04 code by listing out some major symptoms. They are mentioned below as follows

Common Symptoms

• Fuel efficiency might be reduced.
• General engine performance might not be found.
• Other related trouble codes might get stored.
• Flashing of the service engine soon lamp.

Learn the ways with which you can correct this trouble code:

• The faulty oxygen sensor can cause malfunctioning of the vehicle and it has to be quickly replaced.

Don’t get tensed if you are still facing any of these issues as we care for our customers and that’s why we offer a good range of O2 sensor, ECM, electrical connector, PCM, air/fuel sensor, fuel injector, battery, exhaust system, fuel pressure and a lot more. We are sure that now all your issues would be resolved.

It is essential to diagnose this fault code. Here are some steps which a mechanic should follow for diagnosing the problem that triggered a P2A05 code to be stored:

• Carefully checking the system wiring harness and the connector is the first step done by the professional technicians and also focus on the joints that are placed near the exhaust pipes and manifolds and also focus on the sharp edges near the exhaust shields.
• If every system appears to be in proper working condition, attach a scanner to the diagnostic connector and recover every freeze frame data and stored codes.
• In order to diagnose the erratic condition, this information can be highly helpful as you can know how this error code was stored.
• Clear the error codes and check again to see if the error appears.
• This can help you to know if there is any erratic signal stored in the vehicle.
• Kick start the vehicle and allow it to reach the normal operating temperature and allow it to idle if the error pops up again.
• Look carefully at the O2 sensor input data and get the scanner data stream.
• This stream data must be narrowed down so that only the needed data is displayed to grab quick response.
• If the engine works correctly, you will see the fluctuation of the O2 sensor slowly and minimally.
• The error will get stored if the required parameter lies outside the signal.
• Fix the test leads to the sensor ground and signal wires in order to check the live data from the O2 sensor.
• The DVOM can also be used to verify the resistance of the oxygen sensor as well as the voltage and ground signals.
• Before you check the resistance with DVOM detach all the linked controllers.
• It is best to avoid the low-grade replacement catalytic converters as they cause frequent defects. 

Common Mistakes When Diagnosing the P2A05 Code

• Defective PCM.
• Issues with the wires.
• Oxygen sensor might be damaged.
• Damaged exhaust can cause leakage.