P2858 - OBD Trouble Code

 <<See All OBD Codes

The trouble code P2858 can be described as Clutch "B" Pressure Engagement Performance. The signals which come from the switches and sensors control the clutch pressure control solenoid. The clutch pressure is adjusted to be suitable to the engine load state and vehicle driving state. Then it would become possible to finely control the clutch hydraulic pressure with high precision and there would be the attainment of the smoother shift change characteristic. One thing which you must keep in mind that its symptoms as well as causes would surely vary as it depends upon a number of things.

This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle to another. This can happen because of a lot of reasons and the mechanic should diagnose the specific cause for this code. The transmission should detach when it is coming to an end. Now if the transmission would fail to disengage correctly, then the P2858 fault code would appear.

What causes this problem with the Clutch "B" Pressure Engagement Performance?

• Defaults in the high clutch & reverse brake solenoid valve
• There can be inoperative control valve assembly

1. Transmission Fluid Pump - If the transmission fluid pump fails, the fluid of the pump will not be able to circulate in the transmission and the driver may smell the fuel burning. Thus, it might need immediate replacement.
2. Engine Control Module - Is your car engine light still staying ON after resetting or your car engine is turning off for no reason? Then these are some common symptoms indicating that your car engine control module is defective.
3. Powertrain Control Module - The PCM works as the central computer system in an automobile’s mechanism. This auto part is the in charge of all the constituents as well as the functions performed by them. Having such enormous importance in the operation of all the parts means that any defect in it will affect almost every aspect of a car.
4. Transmission Fluid Pump Harness - The fluid pump harness can be faulty and cause transmission to underperform due to transmission slipping and harsh shift. Thus, check for harness faults and replace it now!
5. Electronic Control Unit - The ECU is a major component of your car's onboard computer. It's used to regulate many systems and subsystems in your car's engine, drive train and other major components. Visit us to buy best quality ECU online.
6. Diagnostic Tools - Take the help of a professional mechanic to diagnose OBD code error. Use high grade diagnostic tools to resolve this issue. Buy new tools and equipment form us!

Our main motive is to achieve customer satisfaction and that’s why we will help you to diagnose P2858 code by mentioning some major symptoms below:

Common Symptoms

• Illumination in the service engine soon light

If you wish to correct this fault code, then you have to follow certain steps. Correcting a problem needs your careful attention. Here are some ways with the help of which you will be able to correct the OBD Code P2858:

• Rehabilitate the defaults in the high clutch & reverse brake solenoid valve
• Carefully adjust the faults in the control valve assembly
• Adjust the flawed clutch 

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of car clutch, brake solenoid, control valve assembly, transmission clutch, transmission switch, transmission sensors, clutch pressure control solenoid, auto transmission, pcm, ecm, tcm and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

• Use an OBD-II scanner in order to verify that the code is present, and check for other codes for any other type of error or problem that might need attention.
• The current data along with freeze frame data are recorded, and the codes are then cleared to see if they reoccur.
• The vehicle is inspected for any problems with the wiring and connectors to check for loose connections, corrosion, or shorts.
• The tests related to the clutch "B" pressure and components may help pinpoint the problem, as well as inspection of the current sensor and cut off switch will further be helping the cause.
• The P2858 error is triggered if there is a physical problem with the clutch "B" pressure which could cause the engine performance to go off.

Common Mistakes When Diagnosing The P2858 Code

• There can be a failure in the internal transmission
• Decrease in the transmission fluid level
• Some issues related to the wiring