Error Code P2855: What It Means & What To Do?

 <<See All OBD Codes

The trouble code P2855 can be elucidated as Clutch "A" Pressure Charge Performance. The transmission should detach when it is coming to an end. Now if the transmission would fail to disengage correctly, then the P2855 error code would flash.

The signals which come from the switches and sensors control the clutch pressure control solenoid. The clutch pressure is adjusted to be suitable to the engine load state and vehicle driving state. Then it would become possible to finely control the clutch hydraulic pressure with high precision and there would be the attainment of the smoother shift change characteristic This trouble code is generic, which would mean that it can apply to all the vehicles which are equipped with the OBD-II or the vehicles which are made since 1996 up to the present. The specifications on the definition, the troubleshooting steps as well as repairs can always vary from one vehicle to another.

What causes this problem with the Clutch "A" Pressure Charge Performance?

• Less brake solenoid valve
• There can be distorted control valve assembly

1. Transmission Fluid Pump - Harsh shifts and audible transmission noise are the major symptoms of faulty fluid pump. This leads to decreased performance and chances of increased physical damage to the transmission components. Thus, replace faulty pump now!
2. Engine Control Module - Dead cells in batteries can cause a failure in the engine control module. Many times, a battery is left in the rig long after a cell has died. This would affect the grounding in the car battery.
3. Car Battery - Battery plays a vital role in powering the various systems of the car. If the starting and charging systems are not working properly, it will affect the transmission system badly. Thus, replace it now. Buy a new battery from us today!
4. Powertrain Control Module - If there are some faults in the PCM, then it may throw off the timing and fuel settings of the engine, which can negatively affect the performance. A flawed PCM may cause the vehicle to experience a reduction in fuel efficiency, power as well as acceleration.
5. Automatic Transmission Module - Faulty transmission module can cause problematic down shifts and upshifts, leading to stalling while accelerating or slowing down. This can also hamper many transmission system parts. Thus, replace it now!
6. Electronic Control Unit - Do you know that the poor performance or unexplained drops in fuel economy or efficiency are often associated to onboard car computer problems, or defective ECU issues?
7. Diagnostic Tools - Use factory grade diagnostic tools to resolve OBD code P2855 error. Buy new diagnostic tools and equipment for us.

You might be thinking that how would you diagnose these problems? We at Parts Avatar Canada would help you diagnose the major symptoms easily.

Common Symptoms

• Visibility in the check engine light

Looking out for some ways with the help of which you can correct this fault code? Then you have arrived at the correct place. We are here to help you out, so you must check out the steps mentioned below as follows:

• The malfunctioning PCM/ECM should be repaired or replaced as per the need
• Carefully adjust the faults in the control valve assembly
• Recondition the non-functioning clutch

There is no need to get strained if your OBD Code is still flashing up as we are here at your service. Have a look at our superior variety of car clutch, brake solenoid, control valve assembly, transmission clutch, transmission switch, transmission sensors, clutch pressure control solenoid, auto transmission and many more. Now all your problems would vanish within no time.

Here are some steps which you should follow in order to diagnose this fault code:

After verifying the P2855 code with an OBD-II scanner, the mechanic should begin with a visual inspection of all electrical components, especially looking for some issues in the Clutch "A" Pressure. Any issues should be repaired, and the code should be cleared from the system. If the code reappears after a retest, the mechanic should then move on to performing voltage tests and resistance tests on the sensor, and comparing the information to the manufacturer’s specifications. If the readings are within the correct limits, then the sensor needs to be replaced. However, if the readings are not within the correct limits, then the issue lies elsewhere. The mechanic should continue checking each possible cause, clearing the code and retesting the system after each attempt, to be sure that the correct solution is found.

Common Mistakes When Diagnosing The P2855 Code

• Some issues related to the internal transmission
• The level of the transmission fluid might be very less
• Issues with the car wiring